#1 Rated 24X7 Plumbing Companies Wrangell 99929 AK (844-507-4350)

Posted by in Plumbing Companies, on November 23, 2017

Plumbing Emergency Firms in Wrangell Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Wrangell 99929 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Wrangell 99929 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Wrangell 99929 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Wrangell 99929 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Wrangell Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Wrangell 99929 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Wrangell 99929 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Wrangell 99929 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Wrangell 99929 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Point Hope 99766 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Ruby 99768 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Rampart 99767 AK (844-507-4350)

Have a Plan Before You Start: Working with a designer or architect may seem like a pricey move right out of the gate for someone wanting to remodel their bathroom on a budget, but it is money well spent. Having a plan you’ve worked out with a professional will assure you that your design, budget and timeline are realistic, and it will give you a goal with a path to get there. “Hiring a designer saves you time and money in the long run, so you don’t make expensive errors,” says south Florida-based designer Meredith Marlow.

If a sump pump fails, and water gets into the basement, do not attempt repairs without first turning off the power to all basement outlets.

Disconnect hoses: Standing water in a hose may freeze back into the pipe and create an ice block that, in a best-case scenario, stops your water flow. In the worst cases, it may bust your pipes and create damage to walls, floor and foundation.

Insulate exterior walls to prevent frozen pipes.

Tips for repairing burst pipes: Prevent the problem from occurring again- Once you have gone through the time consuming process of repairing a burst pipe, you need to make sure that the problem does not occur again in the future. Pipes can be saved from leaks and bursts by insulating them in winter and by checking them regularly. If you detect a small crack, you should immediately take action to prevent it from leaking. In case you are leaving for a vacation, you should turn off the main water supply. These small steps can save you from a lot of hassle and expense in the future.

Act quickly to stop a leak: A gushing plumbing leak can dump several gallons per minute into your home. You have to act fast to stop the stream. Shutting off the main water valve is an obvious move. But there may still be a few gallons of water held in pipes above the leak. Turn on the lowest faucet in the house, which will let the water harmlessly drain out of the faucet instead of through the leaking pipe.

Baking Soda, Vinegar, Gravity, and Pressure: If your bath drain is clogged, mix up some of the baking soda/vinegar mentioned in tip two. Pour it down the drain, and then place the stopper over it. After 45-60 minutes, fill the bathtub with water. Then, remove the stopper. The pressure of 40-60 gallons of water should be enough to dislodge the blockage that has been loosened by the baking soda and vinegar. You could also try some plunging or the drain snake in conjunction with the weight of the water.

Pouring chemicals down your drain will corrode the pipes.

Plastic piping is superior than metal piping in almost every way

Both tape and dope work equally as well when you’re sealing pipe threads

If your toilet is making noise it can be due to restricted water flow or a defective ball cock assembly. This can be addressed by replacing the entire ball cock assembly or oiling the trip lever. Prior to doing this please make sure to adjust the shut off valve first. Additionally be sure to turn off the water at the fixture shut off valve followed by flushing the toilet to an empty tank. Sponge up any remaining water.

Installing a special pressure pump will help raise pressure if all other repair options fail. The pump fills with water and then fills partly with air to keep an even pressure in your water lines. If you believe the problem is something serious that you have not been able to identify, you should enlist the services of a professional plumber.

When unclogging a kitchen sink, use a second plunger to cover the other drain to get the most force to remove the clog.

Save Money on Bathroom Modelling – Demolish the whole house and start from scratch. “Most clients don’t want to hear those words,” says Paul Irwin, design director with Landis Construction, in the Washington, D.C., area, “but it really needs to be considered on major remodels.”In one case, for example, plans for a 1,300–square–foot addition revealed that the house’s existing foundation wasn’t up to code and would have to be replaced—a $30,000 proposition. After crunching the numbers, the owners concluded that it would cost as much to update the house, a former summer cottage, as it would to reproduce it new. “For a relatively small additional cost,” says the owner, “we get all the benefits of new construction while preserving the character and feel of our old house.”

Don’t overload your garbage disposal with too much food at one time

Plan a lighting scheme. The best approach to a well-lit space is to incorporate layers of task, accent, ambient and decorative lighting.

What to look for in your next contractor – Check to see if the company has any awards or professional affiliations. Both point to a plumber who not only has been in business for a while but has done a good job of it during that time.

You can also add some hot or boiling water to your bowl and try flushing, to correct a clog.

Ways to Prevent Washing Machine Leaks: Take a look at the door seals- It is not always the water hose in the washing machine which can cause leaking. If the rubber gaskets around the doors of front-loading machines are dirty, mold can start developing and can cause cracks in the seal. Small cracks can stretch into big ones within a short time and cause water to leak from the door of the machine. You should check the door seal for the presence of mold or mildew and should eradicate it immediately if you spot this problem.

Wrenches are essential in plumbing. A pair of medium sized slip joint pliers and an adjustable wrench should cover most jobs, along with various sized wrenches.

Pump capacity charts are available through professional plumbers and installers or pump manufacturers or they can be found on the web.

Wrap uninsulated pipes with newspaper or form. This another proactive measure for battling frozen pipes.

To determine the size of sump pump you need, you must know how much water you’ll need to be pumped, how high the water will be pumped and the length and size of pipe.

Tile a smaller area. Instead of tiling all the bathroom walls, tile only around the tub and shower, and use drywall for the rest of the area.

Know your water main: Know the location of your water main, and shut it off if you leave for an extended amount of time. If no water goes in to the house, chances are no faucet drips can wreak havoc on your home while you’re away.