#1 Rated 24X7 Plumbing Companies Whittier 99693 AK (844-507-4350)

Posted by in Plumbing Companies, on January 31, 2018

Plumbing Emergency Firms in Whittier Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Whittier 99693 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Whittier 99693 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Whittier 99693 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Whittier 99693 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Whittier Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Whittier 99693 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Whittier 99693 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Whittier 99693 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Whittier 99693 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Flat 99584 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Gakona 99586 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Marshall 99585 AK (844-507-4350)

Tips for maintaining your bathroom plumbing: Repair leaks in faucets and showerheads- Leaking faucets is a problem that many people face frequently. This can happen if the washer breaks due to regular use of the faucet. There can be problems with the shower faucet too which can lead to leaks from the shower head. Dripping faucets and showerheads are very annoying and cause a lot of water damage if they are not repaired quickly. You should call a plumber to check the source of the leaks and get it repaired immediately to solve the problem.

Insulate exterior walls to prevent frozen pipes.

Sump pumps usually come with an automatic on/off switch for your convenience

Learn How to Do It Yourself: You shouldn’t attempt to solve all plumbing problems on your own, but there are some things that you should be prepared to do yourself. Knowing how to use a sewer snake, and learning the fine art of unclogging a drain are two cheap plumbing maintenance tips that will save you money in repairs.

When installing a sump pump, it is usually recommended that a check valve be installed, this prevents water left in the outlet pipe from flowing back into the basin

Salt and Baking Soda: Mix 1/2 cup of table salt with 1/2 cup of baking soda and pour down the blocked drain. Leave it for 10-20 minutes, then pour boiling water down. The salt, baking soda, and boiling water will produce a chemical reaction that should dissolve some of the nastiest blockages. (See also: 27 Uses for Baking Soda)

Update Your Pipes: If you live in an older home and still have the original pipes, then you should think about replacing them. Newer plumbing systems are more efficient, as well as being safer and less prone to damage.

Tips to Hire a Local Contractor: Read Online Reviews. If a plumbing company has a great track record, it will definitely be reflected online. Check online resources like Yelp to make sure that other people have had good experiences with the company that you’re looking to hire. Reviews are a great way of knowing whether or not the workmanship that that plumbing company provides is exceptional.

Tips for maintaining your bathroom plumbing: Maintain the right water pressure- Both high pressure and low pressure of water supply are not desirable. Low pressure of water can slow down all the daily activities and cause a lot of annoyance. On the other hand, high pressure of water supply can cause a lot of stress for the pipes. If the pipes are not able to withstand this constant pressure, they can break and cause leaking. It is important to adjust the water pressure with the help of a regulator in order to maintain the pipes and prevent water damage due to leaking.

If you call a plumber right when you first notice a leaky faucet you’ll likely only need a simple, small repair, but if you wait a few months, the leak will worsen and cause more damages leading to more costly repairs.

Save Money on Bathroom Modelling – Tap your contractor’s sources. When it comes to things like flooring, ask your subcontractor if he has odds–and–ends stock left over from other jobs. While renovating a Civil War–era bed-and-breakfast in New Jersey some years back, contractor Bill Asdal needed wood flooring. He made a few phone calls and came up with hundreds of square feet of hardwood, in various lengths and widths, that otherwise would have gone into the trash on other job sites. Just by planing it to uniform thickness, then sanding and refinishing it, he saved his client almost $9,000 in materials costs.

Use granite remnants for counters. Granite shops often have small bits of granite left over from bigger jobs and will sell you enough for a bathroom vanity counter at a discount. To find out what’s available, call your local shops first then drop by to see the granite and negotiate the price.

Save Money on Bathroom Modelling – Make decisions early. Start prowling the aisles at the hardware store or home center way before the wrecking crew shows up. Get a good feeling for what you want in fixtures and appliances and what they cost. If you aren’t absolutely specific up front about what you want, you’ll have to rely on your contractor’s estimate, called an allowance, and his notion of what is acceptable may be quite different from yours. “Ninety–eight percent of the time, allowances are too low,” says Tom Silva. For instance, you may have had a glass–tile backsplash in mind, but your contractor’s bid was for ceramic.

Save Money on Bathroom Modelling – Don’t overspend on wall prep. If your walls are in such rough shape that it would take a painting contractor days of filling and sanding to make them ready for the roller, consider using materials such as Texturglas, from Deerfield Beach, Florida— based company Roos International. A breathable, nontoxic wall covering made of fine glass filaments, Texturglas has a similar look and feel to the fiberglass matting used in auto–body work. It’s available in a variety of surface patterns, takes paint readily, and is designed to be installed right on top of existing surfaces, adding strength while covering up dings.

Deaden sounds with expanding foam. Fill the space between two stainless steel sink basins with expanding foam. The foam deadens vibrations and lessens the gong effect. It’s possible to do this with the sink in place but much neater and easier before installation. Either way, let the foam harden and then trim away the excess with a knife.

Water Trickling Into the Tank: If you hear a sustained hissing sound coming from your toilet, it’s probably a result of water trickling into the tank via the supply line. In this case the parts to check are the float, the refill tube and the ballcock or inlet-valve assembly. The hissing sound is typically caused by water coming through the inlet valve. First check to see whether the float is sticking or needs adjusting. Next, check to make sure the refill tube isn’t inserted too far into the overflow tube. (It should extend only about 1/4″ below the rim of the overflow tube.) If neither of these adjustments solves the problem, you’ll probably need to replace the ballcock assembly as described above.

Pump capacity charts are available through professional plumbers and installers or pump manufacturers or they can be found on the web.

Be sure to pour about a gallon of water to drains that you seldom use so as to prevent odors from getting inside your house. Use snakes when dealing with slow drains to ensure that they will function properly in the event of major flooding. Remember drains must be able to efficiently drain water at all times.

Distilled vinegar can remove hard water stains on your shower head. Just tie a bag of vinegar around your shower head and leave it there for a few hours. Then you can simply wipe away the stains with a cloth.

Adding dish soap to the bowl is another method that might remove a clog

Always know where the main water shut-off valve is located in case of a leak.

Egg shells are a great way to clean garbage disposals

Sump Pump float switches are design to rise with the rising water levels your basin and the pump is started after the water reaches a certain level.