#1 Rated 24X7 Plumbing Companies Trapper Creek 99683 AK (844-456-4168)

Posted by in Plumbing Companies, on September 20, 2017

Plumbing Emergency Firms in Trapper Creek Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Trapper Creek 99683 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Trapper Creek 99683 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Trapper Creek 99683 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Trapper Creek 99683 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Trapper Creek Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Trapper Creek 99683 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Trapper Creek 99683 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Trapper Creek 99683 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Trapper Creek 99683 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Petersburg 99833 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Kake 99830 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Pelican 99832 AK (844-456-4168)

Ways to Prevent Washing Machine Leaks: Use a washer floor tray- This is an inexpensive way to prevent leaks from causing a lot of damage to your laundry. You can place a washer tray under your washing machine so that if there is a leak in the future, the water can get accumulated in the tray instead of spreading to the whole room. It is a small precaution which can minimize water damage and slow down the overflow process. The washer tray can also come in handy if you cannot afford to get a repair or replacement done at the moment.

Looking to save on your water bill? Place a bucket in the shower to catch water, which you can later use to wash your vehicle

Plan the right height for your sink. Typical countertops are 32 to 34 inches off the floor. But you need to consider how your sink will add to or take away from the countertop’s height. If you have an above-counter vessel sink, for example, you’ll want to make your counter height lower so you can wash your hands or brush your teeth comfortably.

It is a wise idea to install flood alarms, which is a device that will alert you in case it comes in contact with water. This device is made to notify you of an impending flooding or serious leak problems.

Have everything planned and materials in hand before you start. Changing course in midstream always costs time and money. You should know what you’re doing and when you expect to finish before launching into any grand bathroom renovation.

What to Do after Flooding: Remove excess water by mopping and blotting. Wipe excess water from wood furniture after removal of lamps and tabletop items. Remove and prop wet upholstery and cushions. Place aluminum foil or wood blocks between furniture legs and wet carpeting. Turn air conditioning on for maximum drying in summer. Remove colored rugs from wet carpeting. Remove art objects to a safe, dry place. Gather loose items from floors.

Be Aware of Little Problems: It is often the smallest problems that can mean the most trouble later on. Make sure you are aware of any little leaks or dripping faucets so that they don’t have the chance to get bigger.

Desperate Situation & Water Won’t Empty: Chances are if you do a treatment with baking soda and vinegar, have the stopper removed, and leave the backed up mess overnight, you’ll find the liquid should have emptied by the morning. The vinegar and baking soda should have worked some of the buildup free on its way down. Do a hot water flush first thing and if the liquid empties as quickly as it normally would, you should be ok–do a couple hot water dumps though just to make sure. However, if the liquid empties slowly, you might want to check the trap to make sure there’s no mass blocking it. If there isn’t, try a couple more treatments of the Flush throughout the day. You just might get away with not having to call in the plumber.

Clogged toilet? Let it sit for a few hours or overnight, then try flushing again. Often times this is all you’ll need to do, to fix the issue. Just be ready for the water to over flow if this doesn’t work.

Poking & Taking Apart: Remove the trap or clean-out plug underneath the sink to try clearing the blockage. Use a plumber’s snake or a wire coat hanger to poke down and break apart the mass. You’ll need an empty bucket on hand to catch all the liquid as well as eye goggles firmly in place.

Ways in Which You Can Prevent Water Damage: Test your sump pump- Sump pumps help in pumping out the water that gets accumulated in the sump basin. These pumps are mostly found in the basements of houses. Sump pumps come in handy during torrential rain or thunderstorms. They get turned on automatically when the sump basin gets filled with water. However, these pumps can become defunct if they are not used for a long time. You need to test whether your sump pump is in proper working condition or not. It is better to keep a spare one as backup so that your house does not get flooded during storms.

If you suspect a leak in your sink, toilet, water main, etc. turn off the water before attempting repairs

Examine Your Water Meter. Your water meter runs from the outside water main line to a small metered box located on the outside of your home. As it makes its way into your home, another meter controls water flow. Be sure to check this area for leaks. Do you see the meter turning even though water isn’t flowing throughout your home? If so, you may have a water leak somewhere. A Ragsdale technician can come to your home and perform a complete plumbing inspection, which will detect the source of the leak.

Tips for installing and repairing a gas line: Always turn off the gas supply before installation or repair- This is a necessary step which should not be avoided. You should turn off the valve present beside the gas meter before removing the old pipe and replacing it with a new one and also while repairing the present one. In case the valve is open, gas can leak and can lead to a fatal disaster by causing a big fire. The valve should be perpendicular to the pipe when it is closed. There is no change in the gas meter when the valve is closed. You should check all this and then start the gas line work.

Deaden sounds with expanding foam. Fill the space between two stainless steel sink basins with expanding foam. The foam deadens vibrations and lessens the gong effect. It’s possible to do this with the sink in place but much neater and easier before installation. Either way, let the foam harden and then trim away the excess with a knife.

Use a shower curtain instead of a glass shower enclosure. “A curved rod with a really cool shower curtain is going to save you a lot of money,” Brugnoni says. Plus, a shower curtain adds color and can be changed out easily.

Water Trickling Into the Tank: If you hear a sustained hissing sound coming from your toilet, it’s probably a result of water trickling into the tank via the supply line. In this case the parts to check are the float, the refill tube and the ballcock or inlet-valve assembly. The hissing sound is typically caused by water coming through the inlet valve. First check to see whether the float is sticking or needs adjusting. Next, check to make sure the refill tube isn’t inserted too far into the overflow tube. (It should extend only about 1/4″ below the rim of the overflow tube.) If neither of these adjustments solves the problem, you’ll probably need to replace the ballcock assembly as described above.

WaterSense labeled toilets meet or exceed plumbing standards

Tips for maintaining your bathroom plumbing: Know the location of the main water valve- You should be aware of the location of the main valve of the water supply to your home. The reason is that if a big leak suddenly causes your house to get flooded with water, you should be able to stop the water supply at once so as to minimize the water damage and halt the wastage of water. The main valve is usually located outside the house beside the water meter. You should turn it off as soon as possible during an emergency.