#1 Rated 24X7 Plumbing Companies Toksook Bay 99637 AK (844-507-4350)

Posted by in Plumbing Companies, on November 22, 2017

Plumbing Emergency Firms in Toksook Bay Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Toksook Bay 99637 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Toksook Bay 99637 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Toksook Bay 99637 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Toksook Bay 99637 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Toksook Bay Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Toksook Bay 99637 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Toksook Bay 99637 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Toksook Bay 99637 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Toksook Bay 99637 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Tetlin 99779 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Tok 99780 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Teller 99778 AK (844-507-4350)

Pouring chemicals down your drain will corrode the pipes.

In case of serious plumbing problems, it is advised that you get the service of qualified professionals, such as a Dallas plumber or plumbers Atlanta. Doing so will give you the guarantee that all your plumbing concerns will be addressed accordingly.

How to deal with water damage? Make use of humidity sensors- You cannot spot the moisture that gets seeped into the walls or the ceiling. There are humidity sensors which can help you to locate these wet spots. Once you know which places are most affected, you can start the drying or damage repair process from there. This saves time and helps in tracking the amount of moisture trapped in such inaccessible places. If even a small amount of dampness is allowed to exist, it can cause rot and mold formation which can gradually eat away at the foundation of your house and make it hollow from within. Humidity sensors help in preventing this.

Cleaning the Pipe: There are some plumbing jobs that I won’t do, but this one is easy. First, place an empty bucket underneath the U-shaped pipe (the trap) beneath the sink. The bucket will collect the water that will spill. Using a plumber’s wrench, loosen the slip nuts at both ends of the pipe. You should be able to finish the operation by hand. When the trap is free, remove it and turn it upside down, emptying the contents into the bucket. You may also need to fish around inside it for debris, and do the same with the pipes that were holding it. An old toothbrush is good for getting the tough gunk out. Rinse the trap with water and then put it all back together. In most cases, that will have done the trick.

How to deal with water damage? Do not panic- The process of dealing with water damage can be quite intimidating and tedious. It is important to remain calm at such a time and deal with things in an efficient manner. You need to assess the situation and make a plan for damage repair. Following a step by step process can make the task easy and quick. You should seek help from the specialists and follow their instructions to minimize the water damage.

Control indoor moisture to prevent mold: The key to stopping mold and mildew is to control dampness. The worst infestations usually occur in damp crawlspaces, in attics and walls where water has leaked in from the outside, and in basements with poor foundation drainage. Stopping leaks, ensuring good ventilation in attics, keeping crawlspaces dry and routing water away from the foundation are the best defenses.

What to look for in your next contractor – Always ask what is provided for the quoted price.

Tips on Hiring a Plumber: You should look for experienced plumbers- There are so many plumbers available out there. It is difficult to know who is better qualified to handle your plumbing job efficiently. To find out whether a plumber is experienced or not, you should contact him on the phone and discuss your problem with him. If he provides a generalized and vague answer, you should get alerted that he is not the right person for you. On the other hand, if a plumber gives you an honest answer, you can book his services without hesitation because he knows his job.

Staying in building during a major gas leak: The peculiar odor of gas is an obvious indication of a major gas leak in the house or the building. It is crucial that you leave the place/building immediately without causing a delay in figuring out the reason for smell. It’s time you should immediately call for the professional assistance of gas line repair in Mansfield, TX. Meanwhile, the best you can do is to cut off the supply, through an emergency switch or gas meter.

Remove hoses: You should remove the hoses from the faucets, and you should do this before the faucets freeze in the cold season.

Be sure to pour about a gallon of water to drains that you seldom use so as to prevent odors from getting inside your house. Use snakes when dealing with slow drains to ensure that they will function properly in the event of major flooding. Remember drains must be able to efficiently drain water at all times.

Striking a match during gas leak: This is the major reason of severe gas leak accidents in the US. In gas leak situation people usually neglect the fact that switching on a light or striking a match can lead to the severe explosion. And this includes all types of electrical appliances that are capable of triggering a spark for an explosion or fire.

Inspect Your Toilet. You may take your toilet for granted every day, but it actually works hard to keep your home’s plumbing system flowing properly. A sticky flapper valve can cause more water to push through your toilet than what is needed. Having a professional plumber inspect your toilet for flow issues and valve leaks can improve performance and reduce the risk of future plumbing disasters and overflow. If your toilet is over 10 years old consider replacing it with an eco-friendly one that uses less water. Have your home’s plumbing system checked for problems now. This simple step can save you money on utilities and emergency plumbing calls in the long run. Call Ragsdale today for all of your plumbing questions and needs.

Tips on Hiring a Plumber: You should ask for references- If you are planning a remodelling project for your home for which you require the help of a professional plumber, then you should definitely ask him to provide examples of his past work. This can give you an idea whether you are hiring the right person for the remodelling job or not. If the plumber is hesitant to supply examples, it means that he is not sure about the standard of his work. You should be able to trust the plumber because you are planning to give a big responsibility to him. Only if the references and examples are satisfactory, you should hire his services.

Ways in Which You Can Prevent Water Damage: Select a safe spot for planting- There are some plants and trees which have invasive root systems which can spread underground and slowly eat away at the drainage system. They can damage your main water supply pipe. If this happens, the force of the water supply through your faucets can start diminishing. The loss of water can make the soil in the yard damp. The roots of the plants can also spread to the foundation of your house and compromise it. To avoid this, you should select safe spots which are at a distance from your house for planting such trees. You can also choose other plants which do not cause damage.

Do not install the water heater in an unheated basement.

Upgrade washing machine hoses: Old, brittle or leaky washing machine hoses are among the most frequent causes of water loss for homeowners. Replace yours regularly to avoid a mighty mess and expensive damage.

A variety of blind caps can help you see your way through repairing a broken valve.

No need to monitor the ongoing work: Supervising the work in progress is a smart choice. Never neglect the ongoing work and workmanship. A plumber is always more cautious in delivering quality service if the work is being monitored by the owner throughout the process of gas line repair in Mansfield, TX. This will also help in learning some new technicalities and basics which you would miss otherwise.

For safety as well as energy-efficiency reasons, when buying gas- and oil-fired water heaters, look for units with sealed combustion or power venting to avoid back-drafting of combustion gases into the home.

Ways to Prevent Washing Machine Leaks: Take a look at the door seals- It is not always the water hose in the washing machine which can cause leaking. If the rubber gaskets around the doors of front-loading machines are dirty, mold can start developing and can cause cracks in the seal. Small cracks can stretch into big ones within a short time and cause water to leak from the door of the machine. You should check the door seal for the presence of mold or mildew and should eradicate it immediately if you spot this problem.