#1 Rated 24X7 Plumbing Companies Stevens Village 99774 AK (844-507-4350)

Posted by in Plumbing Companies, on January 11, 2018

Plumbing Emergency Firms in Stevens Village Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Stevens Village 99774 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Stevens Village 99774 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Stevens Village 99774 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Stevens Village 99774 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Stevens Village Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Stevens Village 99774 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Stevens Village 99774 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Stevens Village 99774 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Stevens Village 99774 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Elmendorf Afb 99506 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Anchorage 99508 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Anchorage 99507 AK (844-507-4350)

Many toilets really do run only at night; that’s because people use much less water during these hours and in many municipal water systems, the water pressure rises considerably during this time.

Ways to choose your plumber – References – Plumbers who have been in business any length of time can and will give you references. If they cannot, or will not, then consider looking elsewhere. Talking with past customers is one of the best ways to accurately gauge the quality of the plumber’s work.

Disconnect outside water hoses. This also prevents frozen pipes.

When cold weather strikes, go into action. Open the cabinets beneath sinks and bathroom fixtures; warmer household air will help prevent the pipes inside from freezing. Opening taps to a bare trickle keeps water flowing and avoids a frozen blockage.

Tips for maintaining plumbing during winter: Repair leaks immediately- If any of your water pipes have developed small leaks, you need to repair them before winter sets in. The cracks can increase the risk of freezing of pipes because water keeps dripping from them. In winter, icicles get formed near the cracks and force them to widen and burst in the long term. It is better to repair them when the water is still running at full force so that you can check for any remaining leaks and repair them immediately.

A pedestal sump pump has the motor attached to the top of a shaft, this motor is not designed to be under water.

Ditch Commercial Drain Cleaners: If you are using commercial drain cleaners to unclog drains, you should stop it right now. The chemicals in these cleaners may be effective but they erode away your pipes and cause more damage than they’re worth.

How to deal with water damage? Locate a leak and stop it immediately- A small leak can lead to a big crack in the pipe and cause a gushing flow of water to damage your house. If a pipe in your house breaks and floods your house with gallons of water, you need to find the source of the leak and stop the flow of water quickly. For this purpose, you need to shut of the main valve of the water supply pipe of your house. However, even after shutting off the main valve, there can be a lot of water stored in the small water pipes. To drain out this excess water, you should turn on the lowest faucet slowly. This can prevent any further water flow through the leaking pipe.

If you heat with electricity and live in a warm and sunny climate, consider installing a solar water heater.

Water Trickling Into the Bowl, or “Phantom Flushes: You may periodically hear your toilet begin to spontaneously refill, as though someone had flushed it. A toilet that cuts on and off by itself, or runs intermittently, has a problem that plumbers call a phantom flush. The cause is a very slow leak from the tank into the bowl. This problem is almost certainly caused by a bad flapper or flapper seat. The solution is to drain the tank and bowl, check and clean the flapper seat, and replace the flapper if it’s worn or damaged.

Tips to Hire a Local Contractor: Read Online Reviews. If a plumbing company has a great track record, it will definitely be reflected online. Check online resources like Yelp to make sure that other people have had good experiences with the company that you’re looking to hire. Reviews are a great way of knowing whether or not the workmanship that that plumbing company provides is exceptional.

Tips for repairing burst pipes: Make use of pipe clamps- In case there are no plumbers available when your pipe bursts, you can repair the pipe yourself with the help of clamps. There are various types of clamps available for different leaks. The pipe clamps come with hinges so that you can simply fix the clamp over the leak and tighten it with the help of screws. These clamps work very well during emergencies and are available every where at a low cost. They stop all kinds of leaks immediately and can act as permanent solutions too in case the leak is not very huge.

Ways in Which You Can Prevent Water Damage: Check your roof for leaks- The roof is the most vulnerable part of your house because it is exposed to the harsh rays of the sun as well as heavy downpour. Such an onslaught can damage the shingles of your roof. This can cause water leaks which can spoil the interiors of your house. You need to check your roof at least once in a year to see whether there are any missing or broken shingles. In case there are a few such shingles, you should immediately get them repaired or replaced. Sometimes the caulking can also get cracked. This too requires repairing.

Bathroom Remodelling Tips – Determine your exact bathroom needs. Do you want to enlarge your bathroom? Do you need another sink? Would you like to add windows? Does the bathroom tile need to be replaced? Think about what your ideal bathroom will look like and then prioritize your needs before your wants.

No need to monitor the ongoing work: Supervising the work in progress is a smart choice. Never neglect the ongoing work and workmanship. A plumber is always more cautious in delivering quality service if the work is being monitored by the owner throughout the process of gas line repair in Mansfield, TX. This will also help in learning some new technicalities and basics which you would miss otherwise.

Count on Countertops: If your vanity is the main focal point of your bathroom, then choosing granite might not be such a splurge. Karen Gray Plaisted, a Warwick, N.Y.-based home stager and decorator says she worked with a couple who did minor updates to the rest of their bathroom, but they chose a slab granite vanity as the focal point for the space. “It gave it a ‘wow’ and saved a lot of money,” she says.

Bathroom Remodelling Tips – Establish a realistic bathroom remodelling budget. At this time you will also need to determine how you will finance your bathroom remodel. Do you have a savings that you can dip into or will you need get a loan? The answer to this will be a factor in determining your budget. Will this be a larger remodel or are you making minor changes? When establishing your budget keep in mind the design ideas you would like and whether they fall on the pricier side. Also, it will always be less expensive if you don’t need to relocate plumbing fixtures, such as toilets or sinks, so if you are on a smaller budget it is more economical to incorporate your current bathroom layout into the new design.

Pay attention to how hardwood meets a tile floor. Chances are, your bathroom will have a tile floor, but the hallway or room it’s connected to will have something totally different, like hardwood. The transition between these two spaces and materials is something that’s tough to get right. As in most cases, planning ahead will give you results that meet your expectations.

You can use a wet/dry vac to retrieve items that fall into the toilet

Use a five gallon bucket as a tool holder. And if a leak springs mid-project, it’ll catch the water. A tool caddy can also be attached to the bucket providing a place for everything.

The first thing you should do is check the main water valve where the water line enters the home. In most cases, the valve looks like a wagon wheel and it is located at the water meter going into the home. Turn the water valve a half-turn in a clockwise direction so it slightly closes off. Then, turn the valve counter clockwise all the way so that it is completely open. There should be a forceful thrust of water that pushes any deposit through the system and raises the pressure. If you think there is sediment built up in your pipes, open your sink faucet, and then turn the water on and off at the main water valve which loosen mineral deposits and push the mineral deposits through the plumbing system.

Most newer water meters have an easy to read leak indicator on the face of the dial