#1 Rated 24X7 Plumbing Companies Sleetmute 99668 AK (844-507-4350)

Posted by in Plumbing Companies, on December 24, 2017

Plumbing Emergency Firms in Sleetmute Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Sleetmute 99668 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Sleetmute 99668 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Sleetmute 99668 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Sleetmute 99668 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Sleetmute Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Sleetmute 99668 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Sleetmute 99668 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Sleetmute 99668 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Sleetmute 99668 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Seward 99664 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Scammon Bay 99662 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Seldovia 99663 AK (844-507-4350)

Poking & Taking Apart: Remove the trap or clean-out plug underneath the sink to try clearing the blockage. Use a plumber’s snake or a wire coat hanger to poke down and break apart the mass. You’ll need an empty bucket on hand to catch all the liquid as well as eye goggles firmly in place.

Tips on Hiring a Plumber: You should look for experienced plumbers- There are so many plumbers available out there. It is difficult to know who is better qualified to handle your plumbing job efficiently. To find out whether a plumber is experienced or not, you should contact him on the phone and discuss your problem with him. If he provides a generalized and vague answer, you should get alerted that he is not the right person for you. On the other hand, if a plumber gives you an honest answer, you can book his services without hesitation because he knows his job.

Examine Your Water Meter. Your water meter runs from the outside water main line to a small metered box located on the outside of your home. As it makes its way into your home, another meter controls water flow. Be sure to check this area for leaks. Do you see the meter turning even though water isn’t flowing throughout your home? If so, you may have a water leak somewhere. A Ragsdale technician can come to your home and perform a complete plumbing inspection, which will detect the source of the leak.

Check appliances regularly: Check and maintain your home appliances regularly for leaks, according to manufacturer’s directions.

Clean gutters, drains, and downspouts. Ridding gutters, drains, and downspouts of detritus prevents leaks as well as mildew and mold growth. Once your roof’s drainage system is clear, examine your property for plumbing vents. Check that each vent is clear of sticks, leaves, nests, and so forth. If you don’t have a tall, sturdy ladder to check high vents, you can call a plumbing repair company for assistance. Residential plumbers don’t just do plumbing repair – they also offer preventive, maintenance-oriented services.

Do not assume that having a large horsepower sump pump will be the best choice for you, do your research before buying

Replace Gaskets on Dripping Faucets. Assuming you’re not a total home plumbing greenhorn, you can probably fix a leaky faucet yourself. Nine times out of ten, the culprit is a cracked, worn down gasket – a part you can easily acquire from a plumbing repair outlet. Residential plumbers can also be contracted to fix dripping faucets.

If you feel like the water pressure from your shower is consistently decreasing than it may be time to clean the head. This can be done by dipping the head in a CLR solution.

Tips for repairing burst pipes: Switch off electricity supply to the room- The main water supply pipes are usually present in the attic or basement. When a pipe bursts, you should not only stop the water supply but also the electricity supply to that room. This precaution is necessary because you can get electrocuted by wading through the flood of water if any electric wire becomes loose or if the water comes in touch with an electric socket. Water and electricity is a fatal combination which can prove to be life-threatening. So you should be careful about it.

Tips for installing and repairing a gas line: Clamps can be used to hold broken the broken pipe- When a gas line pipe breaks suddenly; you need to take immediate action to stop the leak. Pipe clamps are very sturdy and strong and can be used for this purpose. They can be used to cover cracks or leaks in the pipe line. They help in holding the broken pieces of the pipe together to bring the gas line back to working condition so that you can make use of it till you get a chance to get it repaired or replaced.

Tips for maintaining your bathroom plumbing: Drain your water heater regularly- Water heaters tend to accumulate sediment with regular usage because of the heavy minerals that come in with the water supply. It is important to drain the water heaters from time to time in order to remove the layer of sediment blocking the water output pipe. This can help in maintaining the effectiveness of the water heater and you can get a strong and constant flow of hot water on a daily basis.

Sump Pump float switches are design to rise with the rising water levels your basin and the pump is started after the water reaches a certain level.

Washer floor tray – If you can’t afford to replace or repair your leaking washing machine right away or want to protect against future leaks, slide a water catching tray under your washing machine to catch drips and leaks. It’s a simple, inexpensive way to prevent water damage to your floor from a leaky washing machine. Purchase price around $20.

Do not use galvanized straps on copper pipes.

DIY plumbing jobs will need which you learn how to solder copper to the lines to the water supply. You can practice this skill which means you have the ability to run your lines without worrying regarding this leaking. Look online for video tutorials which can help you receive a handle on the way to soldering.

The Drain Snake: This is a fairly low-tech piece of equipment that works wonders. It’s basically a long flexible metal rope with a spiral of metal at the end. The following video shows you just what to do.

Tips for installing and repairing a gas line: Take precautions before starting any repair work- It is necessary to remove gas line plastic covers to get to the gas pipes which are secure under the covers. This process can release some of the trapped gas. You need to wear a gas mask to prevent inhalation because inhaling such gases can cause health problems. It is also important to wear gloves to avoid contact with the harmful gas. These precautions are mandatory when you are attempting the repair process yourself.