#1 Rated 24X7 Plumbing Companies Skwentna 99667 AK (844-507-4350)

Posted by in Plumbing Companies, on December 23, 2017

Plumbing Emergency Firms in Skwentna Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Skwentna 99667 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Skwentna 99667 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Skwentna 99667 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Skwentna 99667 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Skwentna Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Skwentna 99667 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Skwentna 99667 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Skwentna 99667 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Skwentna 99667 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Kodiak 99615 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Kodiak 99619 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Kipnuk 99614 AK (844-507-4350)

What to look for in your next contractor – Verify that the plumber is insured. To get licensed, a plumbing business must secure insurance but always make sure. An uninsured plumber can sue you if he gets hurt while working a job at your home.

Wrap pipes in adhesive-backed felt. Running hot water can cause copper pipes to expand and grind against pipe hangers and joists. So pick up some adhesive-backed felt at the hardware store and cut it into strips. Then remove each hanger and wrap the pipe before refastening the hanger.

Bathroom Remodelling Tips – Establish a realistic bathroom remodelling budget. At this time you will also need to determine how you will finance your bathroom remodel. Do you have a savings that you can dip into or will you need get a loan? The answer to this will be a factor in determining your budget. Will this be a larger remodel or are you making minor changes? When establishing your budget keep in mind the design ideas you would like and whether they fall on the pricier side. Also, it will always be less expensive if you don’t need to relocate plumbing fixtures, such as toilets or sinks, so if you are on a smaller budget it is more economical to incorporate your current bathroom layout into the new design.

Tips for repairing burst pipes: Switch off electricity supply to the room- The main water supply pipes are usually present in the attic or basement. When a pipe bursts, you should not only stop the water supply but also the electricity supply to that room. This precaution is necessary because you can get electrocuted by wading through the flood of water if any electric wire becomes loose or if the water comes in touch with an electric socket. Water and electricity is a fatal combination which can prove to be life-threatening. So you should be careful about it.

Make sure your bath fan is big enough: If the fans aren’t clearing out most of the moisture in your bathrooms after five to 10 minutes, your fans may not be moving enough air. Fans are certified by the volume (cfm, or cubic feet per minute) of air exhausted out of the room. To find the recommended fan capacity for your bathroom, multiply the bathroom square footage by 1.1 (assuming an 8-ft. ceiling; for a 9-ft. ceiling, multiply by 1.5). Check the cfm volume of your fan, usually marked on a label under the grille. Replace it with a larger model if it’s too small for the size of your bathroom.

Tips for maintaining plumbing during winter: Repair leaks immediately- If any of your water pipes have developed small leaks, you need to repair them before winter sets in. The cracks can increase the risk of freezing of pipes because water keeps dripping from them. In winter, icicles get formed near the cracks and force them to widen and burst in the long term. It is better to repair them when the water is still running at full force so that you can check for any remaining leaks and repair them immediately.

Always test your plumbing for leaks before finalizing anything.

Flush the Right Stuff: It can be hard to remember and even more difficult to practice, but the only things you should flush down your toilet are human waste and toilet paper. There are no real exceptions to this rule.

Single-lever shutoff valve – If you are a conscientious launder like my mother and can remember to turn the water off after each load of wash, replace your dual faucets with a single-lever faucet that lets you controls both hot and cold water at the same time. A low cost solution that’s easy to use! Pick one up at any hardware store for about $25.

A pedestal sump pump works well if you have a smaller diameter basins

Using two wrenches at once turning in opposite directions is called “backing off” and allows the wrench to absorb the stress and not the plumbing.

Ways to Prevent Washing Machine Leaks: Change the water shut-off system- It is better to replace the standard double valve for hot and cold water supply with a single shut-off valve so that in case there is a leak, you can immediately shut off the single main valve and stop the water supply to the machine completely. It is a convenient method to prevent further leaking or bursting of the pipes. It is very handy because you have to remember to flip only one lever on your way out.

Tips for Fixing Low Water Pressure in Your Home: Contact the local water department- If there is no problem with any of your water supply pipelines, you need to check whether the municipal water lines supplying water to your main water pipe are in proper working condition or not. You can contact the water department to call them for an inspection. They can detect problems with the water supply lines and solve them. When the water supply becomes normal, the low water pressure problem gets solved.

Tips on Hiring a Plumber: Your plumber should be insured- Plumbers need to be covered by insurance. This is important for consumer protection. If something goes wrong during the plumbing repair service or an accident takes place, the consumer needs to be compensated for the losses. This is only possible if the plumber is insured. The cost of water damage repair is huge so you need insurance coverage. When you book a plumbing service, you should always check if the plumber is insured. This way you can get financial compensation for any damage caused by the plumber.

Be sure to pour about a gallon of water to drains that you seldom use so as to prevent odors from getting inside your house. Use snakes when dealing with slow drains to ensure that they will function properly in the event of major flooding. Remember drains must be able to efficiently drain water at all times.

If your shower head is leaking from where it meets the arm than you may need to just replace a washer. You can do this by loosening the collar using a tape-wrapped rib-joint pliers.

Save Money on Bathroom Modelling – Don’t overspend on wall prep. If your walls are in such rough shape that it would take a painting contractor days of filling and sanding to make them ready for the roller, consider using materials such as Texturglas, from Deerfield Beach, Florida— based company Roos International. A breathable, nontoxic wall covering made of fine glass filaments, Texturglas has a similar look and feel to the fiberglass matting used in auto–body work. It’s available in a variety of surface patterns, takes paint readily, and is designed to be installed right on top of existing surfaces, adding strength while covering up dings.

Tips for Fixing Low Water Pressure in Your Home: Replace the pipes which are old- You should check all your old water supply pipes for clogging. If the supply pipes are made of steel, it is very likely that with time, these pipes have become clogged due to mineral corrosion and build-up. Any kind of obstacle in the water flow can cause the pressure of water supply to slow down. It is better to install copper or plastic pipes because the problem of corrosion does not occur in these pipes. Such replacement of the old steel pipes can remove all barriers to the proper flow of water and reinstate the normal pressure of water flow.