#1 Rated 24X7 Plumbing Companies Shishmaref 99772 AK (844-456-4168)

Posted by in Plumbing Companies, on October 5, 2017

Plumbing Emergency Firms in Shishmaref Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Shishmaref 99772 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Shishmaref 99772 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Shishmaref 99772 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Shishmaref 99772 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Shishmaref Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Shishmaref 99772 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Shishmaref 99772 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Shishmaref 99772 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Shishmaref 99772 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Delta Junction 99737 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Elim 99739 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Eagle 99738 AK (844-456-4168)

If your drain is clogged you can pour half a box of baking soda and ½ a cup of vinegar down a the drain, then wait 30-45 minutes and pour boiling water down the drain.

Ways to Prevent Washing Machine Leaks: Take a look at the door seals- It is not always the water hose in the washing machine which can cause leaking. If the rubber gaskets around the doors of front-loading machines are dirty, mold can start developing and can cause cracks in the seal. Small cracks can stretch into big ones within a short time and cause water to leak from the door of the machine. You should check the door seal for the presence of mold or mildew and should eradicate it immediately if you spot this problem.

The Dreaded Clog: Clogs are the most common toilet problems. Several tools can help you clear a clogged drain. A force-cup plunger is more effective than the familiar standard type for clearing minor clogs. Insert the bulb into the drain, and pump forcefully. Slowly release the handle, letting a little water in so you can see whether the drain is clear. Repeat if necessary. For serious clogs, use a closet auger. Insert the end of the auger into the drain hole, and twist the handle as you push the rotor downward. Use caution not to scratch the bowl.

Shop around for vanities and fixtures. Compare prices online, in big-box stores, in specialty stores and even on Craigslist. Watch for sales and clearance items, too. You can find deals online on everything from faucets to vanities, and the online selection is much larger than what you’ll find at any store.

Tips for Choosing the Right Plumber – Get upfront pricing. When you call for service, you should be given information about the initial cost of a visit and during that visit you should be provided a written quote that adequately addresses the issue. A professional plumber should be able to provide an accurate estimate before any work is done. The company should also be able to apply any fees for quoting a job to the actual cost of the work once the work is completed. And when a company has integrity, they will be upfront with you regarding any extra fees you might incur due to unforeseen problems.

Ways to choose your plumber – Insurance – Plumbers should be insured. In some cases, they may also need to be bonded as well. Insurance will protect both you and the plumber in case of an injury or accident.

Tips for maintaining plumbing during winter: Maintain adequate temperature in your house- The attics and basements are the most vulnerable areas of the house because there is no heat source in these rooms. However, all the main pipes are located in these places. It is important to shut off all sources of cold air to these rooms. The doors and windows need to be properly sealed to prevent freezing of pipes. The thermostat should be kept at more than 55 degrees all the time so that the temperature remains warm enough for the pipes to function normally.

Tips for Fixing Low Water Pressure in Your Home: Take a look at the water heater- Low water pressure can occur in hot water pipes if there is a problem with the water heater. There may be clogging due to sediment accumulation in the heater or the water supply line. The pipes supplying water to the heater may be too narrow. There may be small leaks in the hot water tank or valves. All these reasons can cause the water pressure to become low. It is necessary to eliminate these obstructions in order to make the water flow quickly and with a better force.

Take a picture before closing up walls. Your walls may not have much inner beauty, but it’s a good idea to take pictures of what’s inside during remodeling. The same goes for floors and ceilings. When your next remodeling or repair project rolls around, you’ll know where the framing and the electrical and plumbing lines are.

Dish Detergent: If your toilet is clogged, pour 1/4 cup of dish detergent in the bowl. Then boil some water. The dish soap will act as a lubricant and help break up any greasy residue. Then pour the hot water down, and get ready to start plunging. If the plunger doesn’t cut it, rubber gloves may be the next option.

Drain a quart of water from your water tank every 3 months to remove sediment that impedes heat transfer and lowers the efficiency of your heater.

Trusting the professional for its advertisement only: It is advisable to trust the reputation and service quality of a plumbing service by having a background check for its clients. Many non-professional service providers try to capture clients through attractive advertisements and marketing. Therefore, always be careful and never compromise over the business reputation of professional service providers.

A water heater setting of 115°F provides enough hot water for most users

Understand standard bathroom dimensions. Knowing a few key measurements, like the size of a typical bathtub and how much space is needed for a toilet, will help you plan your remodel more efficiently.

Stops: You should also check to make certain that the stops under each sink and at the back of toilets could be turned without any problem. This way you can close them if you experience a problem.

Save Money on Bathroom Modelling – Consider long–term costs, not just short–term gains. If your addition calls for clapboard siding, for instance, you can save more in the long run by ponying up now for the preprimed and prepainted variety. It costs an extra 10 to 20 cents per foot, but “you’ll wind up paying for half as many paint jobs down the road,” says Paul Eldrenkamp, owner of Byggmeister, a design–build remodeling firm in Newton, Massachusetts. The reason? Factory finishes are applied on dry wood under controlled conditions—no rain, no harsh sun. “I used prefinished claps on my house about ten years ago and the only flaw in the finish is the occasional mildew spot, easily washed off,” Eldrenkamp says. “The paint looks as if it’ll be good for another ten years, easily.” Cost of unfinished siding for a 10–by–40–foot addition, plus two paint jobs: $5,000