#1 Rated 24X7 Plumbing Companies Scammon Bay 99662 AK (844-507-4350)

Posted by in Plumbing Companies, on February 20, 2018

Plumbing Emergency Firms in Scammon Bay Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Scammon Bay 99662 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Scammon Bay 99662 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Scammon Bay 99662 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Scammon Bay 99662 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Scammon Bay Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Scammon Bay 99662 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Scammon Bay 99662 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Scammon Bay 99662 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Scammon Bay 99662 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Port Alexander 99836 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Skagway 99840 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Tenakee Springs 99841 AK (844-507-4350)

Paint the walls. Avocado fixtures against white may look extremely dated. But change the walls to a complementary color, and “suddenly the avocado green is a player,” says Mary Anne Brugnoni, a designer with Renovations by the Morton Group in Fairport, New York. “Paint is your best friend.”

Keep an eye out for trouble. When it comes to plumbing, little leaks can lead to big problems. Be alert to signs of impending plumbing failures: Leaking faucets, damp cabinets, rocking toilets or dripping refrigerators all signal problems that need prompt attention.

Ways to choose your plumber – Pricing – The plumber will know what he or she needs to do and will be able to give an accurate estimate, barring of course, any other major problems. Make sure to get at least three estimates, and be wary of any estimate that is much lower than the others. It could mean the plumber is cutting corners or plans to use inferior parts.

Adding dish soap to the bowl is another method that might remove a clog

Choose chrome rather than brushed nickel fixtures. It’s cheaper, and there are more choices. And chrome is even making a comeback, Brugnoni notes.

Clean-outs: You should also find out where the clean-outs are. This is really important.

Check the aerator in the faucets to see if they need to be cleaned. Remove the aerator using pliers or a crescent wrench. You will find a small screen inside of the faucet head. Remove the screen and thoroughly rinse it. Before replacing the screen, turn on the water to see if the water is flowing properly.

Learn how to tackle small problems. With a few tools and a little knowledge, most of us can handle small plumbing emergencies. With a plunger, a pipe wrench and a sewer snake in your tool kit, you’ll be able to take care of small problems like clogged drains, blocked toilets, stuck valves and dripping faucets. How-to books, home improvement stores and adult education classes can pay for themselves when it’s time to call the plumber.

Lower the thermostat on your water heater; water heaters sometimes come from the factory with high temperature settings

High-efficiency toilets are available in a wide range of models

Ways to Prevent Washing Machine Leaks: Shut off the faucets after use- After your laundry work is over, you should make it a point to turn off the hot and cold water faucets. If you keep the faucets on, they continue to supply water to the washing machine hoses. The excess water which is not required by the machine gets filled up in the pipes and can cause the hoses to burst. Your laundry can get transformed into a watery mess and the water can seep down to the basement level as well. To prevent such water damage, the simplest trick is to shut the faucets after the spin cycle is over.

Ways to Prevent Washing Machine Leaks: Keep the washer lint-free- It does not seem likely that something as minute as lint can cause trouble. However, lint has a tendency to accumulate over time in the drain pipe and clog it. You need to take measures to prevent lint accumulation so that water can drain easily from the machine. There are mesh lint catchers available which do not cost much. You can attach them to the end of the drain pipe. These can help in removing lint from the pipe. You have to change these lint catchers every month to keep the pipe line-free.

Neglecting Annual House Inspection: The smart approach, to avoid the gas leak hazards, is to get the house inspection, annually. Only the professional services should be hired for inspection. Since gas lines are usually hidden from the plain view, therefore, only a professional can detect the unobvious and deterioration signs in gas lines.

Most newer water meters have an easy to read leak indicator on the face of the dial

Desperate Situation & Water Won’t Empty: Chances are if you do a treatment with baking soda and vinegar, have the stopper removed, and leave the backed up mess overnight, you’ll find the liquid should have emptied by the morning. The vinegar and baking soda should have worked some of the buildup free on its way down. Do a hot water flush first thing and if the liquid empties as quickly as it normally would, you should be ok–do a couple hot water dumps though just to make sure. However, if the liquid empties slowly, you might want to check the trap to make sure there’s no mass blocking it. If there isn’t, try a couple more treatments of the Flush throughout the day. You just might get away with not having to call in the plumber.

Save Money on Bathroom Modelling – Bring in natural light without adding windows. Before cutting a big hole in the side of your house and rearranging the framing, consider less invasive—and less expensive—ways of capturing light. To brighten up a windowless bath or hallway, for instance, you can install a “light tube,” which slips between roof rafters and funnels sunshine down into the living space.

Check your water pressure: If the water pressure to your home is set too high, pipes and hoses may fail under the pressure. Buy a water pressure gauge at a local hardware store, attach it to an outside faucet, and turn the faucet to full force. The gauge will give you a reading of the home’s water pressure. Typical residential water systems are designed for water pressure of 40 to 70 psi. If your home’s water pressure exceeds 100 psi, install a pressure regulator (which is available at hardware stores as well.)

Ways in Which You Can Prevent Water Damage: Keep your gutters and downspouts clean- Clogged gutters do not allow the water to drain. The excess water overflows and comes down the side of your house in a cascade. This can cause severe damage to the walls and foundation of your house. You also need to install your downspouts at least 5 to 10 feet away from your house so that there is no pooling of water near it. These gutters and downspouts should be cleaned regularly and specially before the rainy season so that the water gets drained easily.

Plan the right height for your sink. Typical countertops are 32 to 34 inches off the floor. But you need to consider how your sink will add to or take away from the countertop’s height. If you have an above-counter vessel sink, for example, you’ll want to make your counter height lower so you can wash your hands or brush your teeth comfortably.