#1 Rated 24X7 Plumbing Companies Saint Marys 99658 AK (844-507-4350)

Posted by in Plumbing Companies, on February 21, 2018

Plumbing Emergency Firms in Saint Marys Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Saint Marys 99658 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Saint Marys 99658 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Saint Marys 99658 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Saint Marys 99658 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Saint Marys Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Saint Marys 99658 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Saint Marys 99658 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Saint Marys 99658 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Saint Marys 99658 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Pedro Bay 99647 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Palmer 99645 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Perryville 99648 AK (844-507-4350)

Single-lever shutoff valve – If you are a conscientious launder like my mother and can remember to turn the water off after each load of wash, replace your dual faucets with a single-lever faucet that lets you controls both hot and cold water at the same time. A low cost solution that’s easy to use! Pick one up at any hardware store for about $25.

WaterSense labeled toilets get the job done

Tips for installing and repairing a gas line: Clean the gas pipeline after detaching it from the regulator- Most of the gas pipeline repair work is related to pipe clogging because residue gathers very fast in the small valves and parts of the pipeline. You need to detach the pipe from the regulator present in the cooktop. After detaching it, you need to use acetone to remove the dirt and soot that has got accumulated in the pipeline. The cleaning process should be done from time to time so that the pipe remains free from impurities and does not start leaking.

Both tape and dope work equally as well when you’re sealing pipe threads

Tips on Hiring a Plumber: Do not always go for the plumbing company which provides free estimates- You feel reassured when the plumber provides a free estimate for the plumbing job that you require to be done. The reason is that the free estimate gives you an idea regarding the expense that you have to bear for getting the repair work done. It is not necessary for you to choose the services of the plumber who provides with the free estimate. If your plumber gives you the estimate, it is a bonus. However, you should not equate an estimate with the quality of service because many times the plumbers who do not provide the free estimate are very skilled and experienced.

Bathroom Design Tips – Curbless Shower with a Bench and Grab Bars – This doesn’t have to look as antiseptic as it sounds. Think in terms of a tiled shower area with recessed shelves at arm’s level to stop you from having to stoop down to the floor or reach up to a shower rack. Add a matching ceramic bench and grab bars that come in brushed nickel, chrome or bronze to match your faucet hardware. They will look more upscale than the white plastic hospital variety.

Tips for maintaining plumbing during winter: Check your sump pump- The sump pump is essential for draining the excess water. It gets activated when it comes in touch with water and starts pumping water out. It is a good idea to take a look at it in the fall season to check whether it is in proper working condition or not. If it is clogged, you should give it a good clean-up. You should also pour a bucket of water over it to make sure that it is getting turned on. If there is a problem with the sump pump, water can freeze over it in winter and cause damage.

Slow down on the suds: Sometimes using too much detergent can cause lots of suds and lead to leaks. Check the washing machine door for any build up. This is a sign you’re using too much soap and overflowing the machine. Just a small amount of detergent is sufficient.

Renovate just part of your bathroom. If you can’t afford to tear the entire bathroom down to the studs and rebuild it, consider renovating just the tub and shower area. “It’s going to give them the impact of a new bathroom,” Brugnoni says.

Examine your faucets for leaks. Look into the knobs as well as the faucet itself. Numerous gallons of water each day can be wasted due to leaks and that’s not good if you’re paying your water bill. By stopping a leak now, you can save yourself lots of money. Leaks can grow with time too, so avoid a disaster and look all faucets for leaks!

What to Do after Flooding: Remove excess water by mopping and blotting. Wipe excess water from wood furniture after removal of lamps and tabletop items. Remove and prop wet upholstery and cushions. Place aluminum foil or wood blocks between furniture legs and wet carpeting. Turn air conditioning on for maximum drying in summer. Remove colored rugs from wet carpeting. Remove art objects to a safe, dry place. Gather loose items from floors.

Make sure the machine is balanced: It may sound hard to believe, but something as simple as your machine being tilted can cause water to leak. If you’ve recently installed or moved your machine, make sure it is completely level. Even the slightest tilt can cause water to leak from the front of the machine.

What to look for in your next contractor – Always ask what is provided for the quoted price.

Water main: You should check your lines to find out where the water main closes. For instance, if you reside in a condominium, you should check if each unit shuts off. Aside from this, you may want to check if the entire building needs to be turned off. So, this is important if you have a bad leak.

If you call a plumber right when you first notice a leaky faucet you’ll likely only need a simple, small repair, but if you wait a few months, the leak will worsen and cause more damages leading to more costly repairs.

Check appliances regularly: Check and maintain your home appliances regularly for leaks, according to manufacturer’s directions.

Choose a water heater with an appropriate first-hour rating (FHR) by estimating your family’s peak-hour demand for hot water

Water Trickling Into the Tank: If you hear a sustained hissing sound coming from your toilet, it’s probably a result of water trickling into the tank via the supply line. In this case the parts to check are the float, the refill tube and the ballcock or inlet-valve assembly. The hissing sound is typically caused by water coming through the inlet valve. First check to see whether the float is sticking or needs adjusting. Next, check to make sure the refill tube isn’t inserted too far into the overflow tube. (It should extend only about 1/4″ below the rim of the overflow tube.) If neither of these adjustments solves the problem, you’ll probably need to replace the ballcock assembly as described above.