#1 Rated 24X7 Plumbing Companies Port Heiden 99549 AK (844-456-4168)

Posted by in Plumbing Companies, on September 20, 2017

Plumbing Emergency Firms in Port Heiden Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Port Heiden 99549 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Port Heiden 99549 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Port Heiden 99549 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Port Heiden 99549 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Port Heiden Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Port Heiden 99549 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Port Heiden 99549 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Port Heiden 99549 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Port Heiden 99549 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Red Devil 99656 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Quinhagak 99655 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Russian Mission 99657 AK (844-456-4168)

Clean the filters: Sometimes your machine will have problems filling or leaking from the back. Check the inlet filters to make sure they are clean. Clogged filters can prevent proper water flow.

Tips for maintaining plumbing during winter: Remove all garden hoses- The outdoor pipes and fixtures are exposed to the freezing temperatures during winter. It is necessary to prevent the pipes from getting frozen. For this purpose, you need to disconnect all the garden hoses from the water supply faucet so that there is no residual water in these hoses which can freeze up and burst. These should be taken indoors and stored till winter gets over. Water supply to the outdoor spigots should also be shut off to prevent pipes from freezing. All the excess water in these spigots should be drained by turning them on.

Save Money on Bathroom Modelling – Increase efficiency, not size. If you can reorganize and equip your kitchen for maximum utility, you may not need to blow out the walls to gain square footage. Start by replacing space–hogging shelves with cabinet–height pullout drawers 8 inches wide, containing racks for canned goods and other items. “You’re getting three or more horizontal planes where you might otherwise get only one,” says Louis Smith Jr., an architect with Meier Group, in Ann Arbor, Michigan. You could easily shell out a few thousand to outfit cabinets with upgrades like dividers, pull–out pot trays, and lazy Susans, but you’ll save many times that amount by skipping the addition you thought you needed.

Home Improvement Tip – Start with the Bathroom: Consumer reports tell us that 235,000 people wind up in the emergency room each year due to injuries tht occur while showering, taking a bath or using the bathroom. Tub and shower bases with slip free surfaces can eliminate a majority of these injuries. The design of the tub or shower can also come into play. A) Wide Doorways – The doorway should be a minimum of 32 inches wide. In older homes, it’s a narrow 24 inches. When the doorway is only 24 inches a walker or wheelchair will not fit through the bathroom door. B) Stand Up Showers with a Slip Free Base – If you have a small shower make sure to enlarge it so that there is extra room for seating and a walker.

The newer, thicker chemicals meant to remove clogs from drains will often cause or worsen clogs.

If you suspect a leak in your sink, toilet, water main, etc. turn off the water before attempting repairs

Occasionally, the ferrules in a supply tube can get scratched or dented causing water to leak. Use Teflon tape around the ferrule until a permanent repair can be made.

Drain a quart of water from your water tank every 3 months to remove sediment that impedes heat transfer and lowers the efficiency of your heater.

Stops: You should also check to make certain that the stops under each sink and at the back of toilets could be turned without any problem. This way you can close them if you experience a problem.

Use granite remnants for counters. Granite shops often have small bits of granite left over from bigger jobs and will sell you enough for a bathroom vanity counter at a discount. To find out what’s available, call your local shops first then drop by to see the granite and negotiate the price.

Tips for repairing burst pipes: Turn off the water supply- This is the first thing that you need to do when a water pipe in your house bursts. If the water supply is on, the pipe can start leaking and flood the whole place in a short time. You need to shut off the main valve so that the gushing flow of water from the burst pipe slows down immediately and the damage caused by water is restricted. The effort of mopping up the excess water also gets reduced. Once the pipe is completely dry, the repairing work can start.

The Vanity of Furniture: Want to upgrade your tired vanity? Try hunting vintage and antique dressers at flea markets and antique stores. It’s not difficult to cut out the space to hide the plumbing and seal drawers that need to stay in place, and you can set a sink in it or on it. No one will have another one like yours, and you won’t have shelled out big bucks for a run-of-the-mill piece.

Check your water meter when no water is being used then check it again about eight hours later. If your meter has moved, that’s a clear sign that you may have a leak

Install water detection devices: A water detector is a small electronic device that sounds an alarm when its sensor comes in contact with moisture. Its main benefit is that it detects low moisture levels or slow leaks that often go unnoticed. Install it near water heaters, sump pumps, washing machines, dishwashers and toilets to prevent extensive damage and mold growth.

Do not use an extension cord to plug the pump into the outlet

Prevent Clogs: Every so often your bathroom is susceptible to clogs. Help to reduce the risk by taking the precautionary measures. Prevent soap scum build up and invest in a strainer to put around your bathroom drain. That way you can catch stray hairs and soap chips that can wreak havoc on your pipes. Additionally, ensure that you don’t put things that don’t belong in the drain, down the drain. That way you can protect your sinks and toilet.

Ways to Prevent Washing Machine Leaks: Take a look at the door seals- It is not always the water hose in the washing machine which can cause leaking. If the rubber gaskets around the doors of front-loading machines are dirty, mold can start developing and can cause cracks in the seal. Small cracks can stretch into big ones within a short time and cause water to leak from the door of the machine. You should check the door seal for the presence of mold or mildew and should eradicate it immediately if you spot this problem.

Shutting off appliances. Similarly, know how to shut off water to sinks, toilets, washing machines and water-using appliances like the refrigerator’s icemaker. Should they misbehave, knowing the location of the shut-off valve will save the day and a lot of wet cleanup.

Get your self professional tubing cutters, reciprocating-saw blades, hacksaw blades and a plastic pipe saw. Do it right or expect trouble down the road.