#1 Rated 24X7 Plumbing Companies Point Lay 99759 AK (844-456-4168)

Posted by in Plumbing Companies, on October 9, 2017

Plumbing Emergency Firms in Point Lay Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Point Lay 99759 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Point Lay 99759 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Point Lay 99759 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Point Lay 99759 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Point Lay Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Point Lay 99759 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Point Lay 99759 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Point Lay 99759 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Point Lay 99759 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Anchorage 99510 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Anchorage 99512 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Anchorage 99511 AK (844-456-4168)

Save Money on Bathroom Modelling – Plan with stock sizes in mind. “Ask yourself, ‘Why am I building something 10 feet wide if plywood comes in 4–foot–wide sheets?'” says Lisa Stacholy, of LKS Architects, in Atlanta. The same applies to stock windows and doors: Use manufacturers’ off–the–shelf dimensions from the outset and you will save the premiums of custom fabrication.

In case of serious plumbing problems, it is advised that you get the service of qualified professionals, such as a Dallas plumber or plumbers Atlanta. Doing so will give you the guarantee that all your plumbing concerns will be addressed accordingly.

Cold snap: Keep plumbing safe in cold weather. In hard-winter climates, freezing pipes can create a sudden household emergency. Frozen water expands, cracking pipes; when the area thaws, the cracks vent a flood. Plumbing help can be hard to find in a weather crisis, so try these tips:

You can also add some hot or boiling water to your bowl and try flushing, to correct a clog.

Keep Plumbing Where It Is: Another reason to work with a designer on your bathroom renovation: Using the existing piping will save you big bucks. Relocating utilities like the toilet and the bathtub are no small task: Designer Justin Riordan says it costs about $5,000 each time you move plumbing fixtures.

Tips for Choosing the Right Plumber – Beware that not all plumbers have experience with all types of plumbing situations. There are all types of people who learned the trade from on-the-job experience. They have had no other formal vocational training or certifications. So their ability to fix complex repairs is often learn-as-you-go. If that sounds scary to you, it should. You can trust the professionalism and expertise of master plumbers, like those at High Priority Plumber, who are trained professionals that keep current with their licenses. In addition, you want to verify that you are working with a licensed company. Licensing usually requires appropriate insurance and worker’s compensation so that you are not held liable if someone were to get hurt in your home while on the job.

Clean the Showerhead: Over time, your showerhead gets clogged with all sorts of minerals. Ensure that your shower head is working properly by cleaning it every so often. Remove the showerhead and soak it in vinegar overnight. Wipe down the showerhead and rinse it thoroughly. Reattach the showerhead. That way you can safely remove deposits so that your shower works properly.

Take more showers than baths. You use 15-25 gallons of hot water for a bath, but less than 10 gallons during a 5-minute shower.

Although most water heaters last 10-15 years, it’s best to start shopping for a new one if yours is more than 7 years old.

Bathroom Remodelling Tips – Establish a realistic bathroom remodelling budget. At this time you will also need to determine how you will finance your bathroom remodel. Do you have a savings that you can dip into or will you need get a loan? The answer to this will be a factor in determining your budget. Will this be a larger remodel or are you making minor changes? When establishing your budget keep in mind the design ideas you would like and whether they fall on the pricier side. Also, it will always be less expensive if you don’t need to relocate plumbing fixtures, such as toilets or sinks, so if you are on a smaller budget it is more economical to incorporate your current bathroom layout into the new design.

Lower the thermostat on your water heater; water heaters sometimes come from the factory with high temperature settings

Pump capacity charts are available through professional plumbers and installers or pump manufacturers or they can be found on the web.

Know Where the Shutoff Valves Are: When you do experience problems, like an overflowing toilet or a pipe that has exploded, you need to shut off the water immediately to prevent further damage. Know where the shutoff valves are so you can prevent the problem from getting worse.

Perform a pipe inspection to check for leaks. You may have to look into some hard to see places such as under the home so make sure you use a flashlight. If you find a water leak in a pipe, you will have to get it repaired or replaced. You will have to shut off the main water valve so it can be repaired. It is wise to hire a plumber to do the job.

Plastic piping is much easier to install, adjust and tighten if a leak develops, than metal piping

Look for Drips. Puddles of water on your basement floor are an obvious sign of a plumbing leak. But, in many cases, a loose valve or cracked pipe may simply cause condensation to build up in a specific area. Odor-causing bacteria and mold can begin to form in these places. If you suspect a leak, having your plumbing inspected by a Ragsdale professional can help you save money and avoid replacing damaged drywall and carpeting.

Drain a quart of water from your water tank every 3 months to remove sediment that impedes heat transfer and lowers the efficiency of your heater.

Punch It Up With Paint: Don’t underestimate the impact a pop of colorful paint can have in a small space. If you coordinate with a detail like your tile work, it can bring an entirely new dimension to your bathroom that you might never have noticed before, says Mary Elizabeth Hulsey, founder of Mission Stone & Tile in Nashville, Tenn.

Ways to Unclog Drains: Apply your knowledge of the law of gravity- In case your bathtub drain pipe is clogged, you just need to fill the bathtub with water to the brink after plugging the drain. Once this process is over, you can unplug the drain and see the effect. The law of gravity works to pull the water into the drain at a tremendous speed. This creates a pressure which helps in washing away the blockage in the drain pipe. You can get a clean drain without much effort.

Tips for repairing burst pipes: Make use of pipe clamps- In case there are no plumbers available when your pipe bursts, you can repair the pipe yourself with the help of clamps. There are various types of clamps available for different leaks. The pipe clamps come with hinges so that you can simply fix the clamp over the leak and tighten it with the help of screws. These clamps work very well during emergencies and are available every where at a low cost. They stop all kinds of leaks immediately and can act as permanent solutions too in case the leak is not very huge.

Save Money on Bathroom Modelling – Tap your contractor’s sources. When it comes to things like flooring, ask your subcontractor if he has odds–and–ends stock left over from other jobs. While renovating a Civil War–era bed-and-breakfast in New Jersey some years back, contractor Bill Asdal needed wood flooring. He made a few phone calls and came up with hundreds of square feet of hardwood, in various lengths and widths, that otherwise would have gone into the trash on other job sites. Just by planing it to uniform thickness, then sanding and refinishing it, he saved his client almost $9,000 in materials costs.