#1 Rated 24X7 Plumbing Companies Petersburg 99833 AK (844-507-4350)

Posted by in Plumbing Companies, on December 31, 2017

Plumbing Emergency Firms in Petersburg Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Petersburg 99833 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Petersburg 99833 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Petersburg 99833 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Petersburg 99833 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Petersburg Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Petersburg 99833 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Petersburg 99833 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Petersburg 99833 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Petersburg 99833 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Gakona 99586 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Girdwood 99587 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Marshall 99585 AK (844-507-4350)

If pipes do freeze, don’t panic. First, shut off the water supply to the house, then open a faucet near the blocked area to vent vapors from the frozen water. If you suspect that pipes in the hot water system are frozen, turn off the hot water heater. Use a hair dryer to warm the frozen pipe (never use an open flame to thaw a pipe), starting at the end of the pipe nearest to the tap. (Don’t use a hair dryer in areas of standing water.) You’ll know the pipe has begun to thaw when water begins to trickle from the open faucet. When the flow is restored, check the plumbing carefully for cracks or leaks.

Check your water pressure: If the water pressure to your home is set too high, pipes and hoses may fail under the pressure. Buy a water pressure gauge at a local hardware store, attach it to an outside faucet, and turn the faucet to full force. The gauge will give you a reading of the home’s water pressure. Typical residential water systems are designed for water pressure of 40 to 70 psi. If your home’s water pressure exceeds 100 psi, install a pressure regulator (which is available at hardware stores as well.)

Desperate Situation & Water Won’t Empty: Chances are if you do a treatment with baking soda and vinegar, have the stopper removed, and leave the backed up mess overnight, you’ll find the liquid should have emptied by the morning. The vinegar and baking soda should have worked some of the buildup free on its way down. Do a hot water flush first thing and if the liquid empties as quickly as it normally would, you should be ok–do a couple hot water dumps though just to make sure. However, if the liquid empties slowly, you might want to check the trap to make sure there’s no mass blocking it. If there isn’t, try a couple more treatments of the Flush throughout the day. You just might get away with not having to call in the plumber.

It’s a myth that low flow toilets don’t perform as well as regular flow toilets

How to deal with water damage? Remove the visible mold- It does not take long for mold to grow in damp conditions. It usually grows in the grout lines of bathroom tiles. If you do not eradicate the mold immediately, it can spread to other areas and make your job harder. An easy way to attack and remove mold is to scrub the mold affected area with detergent and water and let it dry. Now you can concentrate completely on the drying process.

Tips to Hire a Local Contractor: Make Sure They Have a License. This is probably the most basic rule for finding a plumber. Always make sure that a plumbing company has the right credentials and carries full insurance to protect you just in case some sort of disaster happens.

You can use a wet/dry vac to retrieve items that fall into the toilet

Tips for maintaining your bathroom plumbing: Know the location of the main water valve- You should be aware of the location of the main valve of the water supply to your home. The reason is that if a big leak suddenly causes your house to get flooded with water, you should be able to stop the water supply at once so as to minimize the water damage and halt the wastage of water. The main valve is usually located outside the house beside the water meter. You should turn it off as soon as possible during an emergency.

Looking to save on your water bill? Place a bucket in the shower to catch water, which you can later use to wash your vehicle

Prevent Clogs: Every so often your bathroom is susceptible to clogs. Help to reduce the risk by taking the precautionary measures. Prevent soap scum build up and invest in a strainer to put around your bathroom drain. That way you can catch stray hairs and soap chips that can wreak havoc on your pipes. Additionally, ensure that you don’t put things that don’t belong in the drain, down the drain. That way you can protect your sinks and toilet.

“Plumber’s putty,” can damage plastic and it can leave stains.

Check your pressure regulator because sometimes this can cause low water pressure. The pressure regulator is the device shaped like a bell with a screw at the end. You can normally find the pressure regulator either under the home or below the frontal connection. Often you just have to adjust the screw to restore pressure. Tighten the screw to boost the pressure. Make sure you set it between 45 – 60 psi.

Consider “smart” bathroom timers and humidity sensors: Bath fan timers are important because excess humidity can cause everything from window condensation and mildew to moisture and rot inside walls. Some new wall switch timers have dual controls for turning off both lights and fans after a preset time. For the ultimate in smart bath fan timers, buy a humidity-sensing fan designed to automatically turn on and off as moisture levels at the ceiling rise and fall.

Natural gas, oil and propane water heaters are less expensive to operate than electric models.

What to look for in your next contractor – Do they guarantee their work? It is an industry standard to verify labor and parts. Be wary of any plumber that does not offer any type of guarantee.

Ways to Unclog Drains: Baking soda and salt can also help- Instead of vinegar; you can combine salt with baking soda and drop the mixture into the drain. You need to leave it there for half an hour so that it sticks to the sides of the drain. After that you can pour hot water in the drain pipe so that the chemical reaction can destroy the sticky and greasy waste and push it down the drain to get flushed out of the pipe. It is a good combination to remove the biggest blockages in the drain pipes.

What to Do after Flooding: Remove excess water by mopping and blotting. Wipe excess water from wood furniture after removal of lamps and tabletop items. Remove and prop wet upholstery and cushions. Place aluminum foil or wood blocks between furniture legs and wet carpeting. Turn air conditioning on for maximum drying in summer. Remove colored rugs from wet carpeting. Remove art objects to a safe, dry place. Gather loose items from floors.

Tips on Hiring a Plumber: Keep an eye on the response time- Many plumbing service companies take as long as 4 days to follow up. You should choose a reputable plumbing company which gets back to you within a short time because plumbing problems are close to emergencies. Water damage can be very severe and lead to a lot of expenses if it is not resolved. Professional plumbers are more responsive and have a good understanding of all kinds of plumbing problems. You should go for their services.