#1 Rated 24X7 Plumbing Companies Palmer 99645 AK (844-507-4350)

Posted by in Plumbing Companies, on January 13, 2018

Plumbing Emergency Firms in Palmer Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Palmer 99645 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Palmer 99645 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Palmer 99645 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Palmer 99645 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Palmer Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Palmer 99645 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Palmer 99645 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Palmer 99645 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Palmer 99645 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Pilot Station 99650 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Pilot Point 99649 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Platinum 99651 AK (844-507-4350)

Getting your boiler and central heating system serviced and checked in summer is often ideal as you can do it in your own time, as opposed to expensive emergency call outs over the winter. And once it’s done, you can rest easy in the sun, knowing that when the colder months arrive you’ll be tucked up in the warm.

Starch products or coffee grounds: It’s not a good idea to put a lot of starch product or coffee grounds in the garbage disposal. This waste can clog your drain. In the same way, coffee grounds may attract grease that can accumulate over time. While a small quantity of these things won’t cause problems, peeling tons of potatoes into the drain can give you lots of problems.

The most common causes of dripping faucets, are worn washers, bad internal seats or worn/faulty faucet cartridges

Save Money on Bathroom Modelling – Limit recessed light fixtures. The more recessed lights you put in, the more it’s going to cost,” says Tom Silva, This Old House’s general contractor. In addition to the fixtures, there’s the labor to cut all the holes and insulate them properly. A wall– or ceiling–mounted light can also deliver more wattage, which means you may be able to get away with fewer fixtures.

A pedestal sump pump works well if you have a smaller diameter basins

Use a shop vacuum to remove hard objects. When a hard object like a toothbrush, comb or toy plugs a toilet or drain, a plunger may not be the solution—it might only push the obstruction in deeper. Instead, suck out the water and the obstruction with a wet/dry shop vacuum.

It’s a myth that low flow toilets don’t perform as well as regular flow toilets

Spot the sewer valve. Finally, hunt down the location of the household’s main sewer valve. It’s there to provide access to correct a clogged sewer line; don’t make the Roto-Rooter man spend pricey labor time looking for it when the toilets overflow.

Tips on Hiring a Plumber: Go for reputable plumbing companies- It is very important to choose a reputable company for getting a plumbing service because the plumbers use the best quality material and parts. These parts come with factory warranties so that you can rest assured that you will get a free replacement of the parts in case they get damaged within the warranty period. Reputable plumbers also provide guarantee on their services. This guarantee ensures that if there is any problem with the plumbing work done by the plumber within the given guarantee period, you can get complete coverage.

Look for Drips. Puddles of water on your basement floor are an obvious sign of a plumbing leak. But, in many cases, a loose valve or cracked pipe may simply cause condensation to build up in a specific area. Odor-causing bacteria and mold can begin to form in these places. If you suspect a leak, having your plumbing inspected by a Ragsdale professional can help you save money and avoid replacing damaged drywall and carpeting.

Choose a water heater with an appropriate first-hour rating (FHR) by estimating your family’s peak-hour demand for hot water

Save Money on Bathroom Modelling – Plan with stock sizes in mind. “Ask yourself, ‘Why am I building something 10 feet wide if plywood comes in 4–foot–wide sheets?'” says Lisa Stacholy, of LKS Architects, in Atlanta. The same applies to stock windows and doors: Use manufacturers’ off–the–shelf dimensions from the outset and you will save the premiums of custom fabrication.

The Wet & Dry Vacuum: If you have a wet & dry shop vacuum, it can become a terrific tool to unclog drains. First, set it to vacuum liquids. Cover up the vent to prevent a mess. Then, create the tightest seal you can over the drain. You may want to get creative and adapt an old plunger head for this purpose. With the vacuum turned on its highest setting, it can be powerful enough to draw the clog up the pipe and into the vacuum bag. It doesn’t always work, but it’s worth a shot.

Tips for maintaining your bathroom plumbing: Remove blocks from the drainage system- Over a period of time, a lot of waste can get accumulated in the drain pipes and cause clogging. Slow drainage of water through the sink is an indication of a clogged drain. You can unclog the drain yourself by pouring a mixture of baking soda, vinegar and hot water in the drain. This can help in flushing the debris from the pipe and unclogging it. There is also the option of using snake pipes to pull out the obstructing elements from the drain pipes so that they start functioning normally.

Know where to go when trouble happens. Should plumbing fail, will you know how to stop the flood? Locate the main shut-off valve for the home water supply. If it’s in a dark, hidden, or hard-to-reach place, gather any tools you’ll need for a quick shut-off, and store them nearby. There’s nothing like the frustration of a missing flashlight or a misplaced shut-off key when water’s pouring down the stairs from a broken pipe.

Make sure that everyone within your household knows how to turn off the principle water supply, or understands how to contact someone that can. In the case of a burst pipe or another water-related emergency, you ought to immediately shut down this type of water to prevent flooding, structural damage, as well as a sky-high water bill.

Know Where the Shutoff Valves Are: When you do experience problems, like an overflowing toilet or a pipe that has exploded, you need to shut off the water immediately to prevent further damage. Know where the shutoff valves are so you can prevent the problem from getting worse.

If you are going to anchor a pipe make sure to leave room for expansion.

A leaky toilet can waste enough water to fill an Olympic sized swimming pool in one year. Now just imagine what that is doing to your bill.

Tape is only meant for pipe threads, don’t use tape on compressors or other connections

Searching quality within cheap prices: Don’t get fooled by the cheap offers or other marketing strategies by some professional plumbing companies. Remember, quality has its price, therefore, do not compromise your safety. And always ask for proof in the form of licenses/certifications as a good company always satisfies its customers through trust building.

Tips for Fixing Low Water Pressure in Your Home: Make use of a water pressure booster- If your house is located at an elevation, it may be difficult for the water to travel uphill. This can cause the force of the water flow to decrease. In order to give it a boost, you can make use of a water pressure booster. The suction force of the pump can help in increasing the flow of water through the supply lines. This is a one-time investment which you need to make in order to get a constant supply of water at a high pressure.

Tips for installing and repairing a gas line: Always turn off the gas supply before installation or repair- This is a necessary step which should not be avoided. You should turn off the valve present beside the gas meter before removing the old pipe and replacing it with a new one and also while repairing the present one. In case the valve is open, gas can leak and can lead to a fatal disaster by causing a big fire. The valve should be perpendicular to the pipe when it is closed. There is no change in the gas meter when the valve is closed. You should check all this and then start the gas line work.

Tips for maintaining plumbing during winter: Maintain adequate temperature in your house- The attics and basements are the most vulnerable areas of the house because there is no heat source in these rooms. However, all the main pipes are located in these places. It is important to shut off all sources of cold air to these rooms. The doors and windows need to be properly sealed to prevent freezing of pipes. The thermostat should be kept at more than 55 degrees all the time so that the temperature remains warm enough for the pipes to function normally.