#1 Rated 24X7 Plumbing Companies Nulato 99765 AK (844-507-4350)

Posted by in Plumbing Companies, on February 12, 2018

Plumbing Emergency Firms in Nulato Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Nulato 99765 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Nulato 99765 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Nulato 99765 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Nulato 99765 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Nulato Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Nulato 99765 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Nulato 99765 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Nulato 99765 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Nulato 99765 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Anchorage 99509 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Anchorage 99511 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Anchorage 99510 AK (844-507-4350)

Choose chrome rather than brushed nickel fixtures. It’s cheaper, and there are more choices. And chrome is even making a comeback, Brugnoni notes.

Tips for Fixing Low Water Pressure in Your Home: Contact the local water department- If there is no problem with any of your water supply pipelines, you need to check whether the municipal water lines supplying water to your main water pipe are in proper working condition or not. You can contact the water department to call them for an inspection. They can detect problems with the water supply lines and solve them. When the water supply becomes normal, the low water pressure problem gets solved.

Ways to Unclog Drains: Buy a snake pipe to pull out the obstacle- This is a cleaning equipment which is very effective. It has to be used manually to bring out the things which are obstructing the drainage system. The snake pipe has a flexible metal spiral string at one end which can be pulled out and extended to slide into the pipe like a snake and after reaching the point of the clog; it can dislodge it and pull it out. The snake pipe should be used after opening the drain pipe from below. This can effectively remove the obstacle in a short time.

A pedestal sump pump has the motor attached to the top of a shaft, this motor is not designed to be under water.

Have an older shower head? You can save up to 7.5 gallons of water per minute by replacing it with a newer model.

If you live in areas where sewers tend to back up sometimes, then you should consider installing a backflow valve on your floor drain. This functional yet seemingly simple device is designed to inhibit backups to your floor drain.

Ways to Unclog Drains: Put your clothes hanger to good use- It is amazing what a simple wire hanger lying in your cupboard can do. You need to straighten out the wire hanger and form a hook like structure on the one end of it. This hook should be lowered into the drain holes present at the bottom of the sink in order to fish out the obstacle. Generally, the clogging occurs due to the presence of hair or food waste in the pipe which does not get drained with the water. Instead of pushing the dirt further down the pipe, you should pull out as much of it as you can and then switch on the tap to wash away the remaining dirt. This can clean your pipe instantly.

Ways to Prevent Washing Machine Leaks: Change the water shut-off system- It is better to replace the standard double valve for hot and cold water supply with a single shut-off valve so that in case there is a leak, you can immediately shut off the single main valve and stop the water supply to the machine completely. It is a convenient method to prevent further leaking or bursting of the pipes. It is very handy because you have to remember to flip only one lever on your way out.

A pedestal sump pump works well if you have a smaller diameter basins

Get Referrals and Do Your Own Search: Now we go to finding someone who can help you with your plumbing trouble. If you have friends and families around your area, ask for referrals. Most common than not, they too have their share of some plumbing troubles. If however you are not comfortable with this act, ask Google! You will surely end up with a short list of reputable plumbing companies.

Check your water meter when no water is being used then check it again about eight hours later. If your meter has moved, that’s a clear sign that you may have a leak

Save Money on Bathroom Modelling – Don’t move the kitchen sink. Or the toilet, if you can avoid it. “That often becomes the biggest part of the plumbing–price increase,” says Richard Trethewey, This Old House plumbing and heating expert. If your new layout requires that you move the toilet, use the opportunity to upgrade the pipes at the same time. “That will save you money in the long run,” says Richard.

Plastic piping is superior than metal piping in almost every way

A spring loaded timer that attaches directly onto your outdoor faucet, will help prevent you from over or under watering your garden

Save Money on Bathroom Modelling – Consult an architect. Depending on the scale of your project, you might not need a full–on architectural commission, which involves extensive meetings, multiple job–site visits, and several sets of construction drawings, to the tune of about 8 percent of a project’s construction budget. You might be able to tap an architect’s design savvy by having him undertake a one–time design consultation. For example, for a $400 flat fee, Baton Rouge architect Kevin Harris will meet with a homeowner, examine the problem, and sketch out a few solutions that could be as simple as opening up a partition wall or moving a door. The homeowner can then give the sketch to a builder or take it to a drafting service, which will charge about $1 to $1.50 a square foot to crank out formal construction drawings.

Water main: You should check your lines to find out where the water main closes. For instance, if you reside in a condominium, you should check if each unit shuts off. Aside from this, you may want to check if the entire building needs to be turned off. So, this is important if you have a bad leak.

Tips for Fixing Low Water Pressure in Your Home: Take a look at the water heater- Low water pressure can occur in hot water pipes if there is a problem with the water heater. There may be clogging due to sediment accumulation in the heater or the water supply line. The pipes supplying water to the heater may be too narrow. There may be small leaks in the hot water tank or valves. All these reasons can cause the water pressure to become low. It is necessary to eliminate these obstructions in order to make the water flow quickly and with a better force.

Look at your faucets for leaks. Check the knobs along with the faucet itself. Hundreds of gallons of water each day could be wasted due to leaks and that’s not good if you’re paying your water bill. By stopping a leak now, you save yourself a lot of money. Leaks can grow with time at the same time, so avoid a disaster and appearance all faucets for leaks!

Make sure the float in your sump pump is free of obstructions

Install a toilet yourself. The costs of installing fixtures also adds to the cost of a remodeling project. One thing that many homeowners can do themselves is hook up a new toilet, which can take just one hour.

Act quickly if your pipes freeze! Shut down this type of water and open the faucet, enabling it to empty when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer on the pipe – this will quickly defrost it. You might wrap the pipe inside a heating pad or aim a heat lamp at it, but this may take quite a while. A last resort is to wrap the pipe in rags and pour boiling water over it.