#1 Rated 24X7 Plumbing Companies North Pole 99705 AK (844-507-4350)

Posted by in Plumbing Companies, on December 3, 2017

Plumbing Emergency Firms in North Pole Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies North Pole 99705 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in North Pole 99705 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors North Pole 99705 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies North Pole 99705 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies North Pole Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms North Pole 99705 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors North Pole 99705 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies North Pole 99705 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies North Pole 99705 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Flat 99584 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies False Pass 99583 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Marshall 99585 AK (844-507-4350)

Tips for repairing burst pipes: Choose the partial repair method to save expenses- If a new pipe bursts either due to freezing or external damage, you can tell the plumber to cut off the pipe from the point of the leak and join a new pipe of the same length to it with the help of soldering or clamps rather than removing the whole pipe and installing a new one. This way you do not have to spend a huge amount on replacing the whole pipe and your problem will also get solved effectively. This is called the partial pipe repair method.

Wrap uninsulated pipes with newspaper or form. This another proactive measure for battling frozen pipes.

If you think your plumbing or heating equipment is due for any work it is always advisable to get it done in the summer before you need it as you don’t want to be left in the cold with a higher bill for emergency work.

What to look for in your next contractor – Find customer reviews of each company online to check the quality of the plumber and his work. Yelp is a great source of customer reviews, but it’s also a great idea to check a more reliable source like the Better Business Bureau before coming to a conclusion. Remember, no one’s perfect so a few bad reviews shouldn’t be a deal breaker. However, if the majority of the reviews are bad or the few bad ones are terrifyingly bad, keep looking.

Isolation valves located at each fixture will stop the flow of water to that location. This allows water to continue to service the remainder of the house while the leak is being repaired. It’s a good idea to turn on and off each isolation valve in the house at least once a year to keep them in good working condition.

Clean visible mold immediately: Surface molds grow in just about any damp location, such as the grout lines of a ceramic tile shower. To get rid of mold, scrub with detergent and water and let the surface dry completely. Or use a solution of 10 percent bleach and 90 percent water (a stronger bleach solution will not give better results). Spray or brush on the solution, let it sit 10 minutes, then rinse it off and let dry. A nontoxic mold control product called Concrobium ($10 for 22 oz. at home centers) can be effective if used every few months.

Understand standard bathroom dimensions. Knowing a few key measurements, like the size of a typical bathtub and how much space is needed for a toilet, will help you plan your remodel more efficiently.

Do not use an extension cord to plug the pump into the outlet

Tips for maintaining plumbing during winter: Check your sump pump- The sump pump is essential for draining the excess water. It gets activated when it comes in touch with water and starts pumping water out. It is a good idea to take a look at it in the fall season to check whether it is in proper working condition or not. If it is clogged, you should give it a good clean-up. You should also pour a bucket of water over it to make sure that it is getting turned on. If there is a problem with the sump pump, water can freeze over it in winter and cause damage.

Look for Broken Hose Bibs and Frozen Pipes. Freezing water is a major cause of home plumbing damage. Many a plumbing repair is necessitated by water that’s expanded into ice, bursting pipes and other home plumbing components. When shifting from liquid to solid state, water swells by 9%. For this reason, homeowners should shut off and drain water systems prior to hard freezes. In the spring, check that all parts of your home plumbing system are still functional. Check faucets, outside spigots, and all parts of your plumbing schema. Beyond functionality, check for leaking pipes and pooling water. Should you discover ice damage, arrange for several quotes from local residential plumbers – doing so will generally win you a lower bid.

Tips for Fixing Low Water Pressure in Your Home: Check individual faucets- If one of your faucets is not providing adequate flow of water, you need to check whether the problem is just with that faucet or with all the faucets. In case only one faucet turns out to be faulty, you can check what is restricting its flow. The aerator may be clogged, the stop valve may be partially closed or the washer may be dislodged. Once you identify the fault, you clean it out or remove it. You can also check the supply valves which are present below the faucets to see whether the valve is completely open or not. This can solve the problem.

Disconnect hoses: Standing water in a hose may freeze back into the pipe and create an ice block that, in a best-case scenario, stops your water flow. In the worst cases, it may bust your pipes and create damage to walls, floor and foundation.

A leaky toilet can waste enough water to fill an Olympic sized swimming pool in one year. Now just imagine what that is doing to your bill.

Look at your faucets for leaks. Check the knobs along with the faucet itself. Hundreds of gallons of water each day could be wasted due to leaks and that’s not good if you’re paying your water bill. By stopping a leak now, you save yourself a lot of money. Leaks can grow with time at the same time, so avoid a disaster and appearance all faucets for leaks!

Don’t delay cleanup: The longer things stay wet, the more likely you’ll have permanent damage. Delay can also lead to mold problems inside walls, which can cost thousands to eradicate. So before you run off to buy plumbing parts, clean up the mess. Pronto.

Tips for installing and repairing a gas line: Always turn off the gas supply before installation or repair- This is a necessary step which should not be avoided. You should turn off the valve present beside the gas meter before removing the old pipe and replacing it with a new one and also while repairing the present one. In case the valve is open, gas can leak and can lead to a fatal disaster by causing a big fire. The valve should be perpendicular to the pipe when it is closed. There is no change in the gas meter when the valve is closed. You should check all this and then start the gas line work.

Tips for Fixing Low Water Pressure in Your Home: Make use of a water pressure booster- If your house is located at an elevation, it may be difficult for the water to travel uphill. This can cause the force of the water flow to decrease. In order to give it a boost, you can make use of a water pressure booster. The suction force of the pump can help in increasing the flow of water through the supply lines. This is a one-time investment which you need to make in order to get a constant supply of water at a high pressure.

Tips for repairing burst pipes: Replace the old pipes- In case the pipe that has burst is a few years old, it is better to replace it rather than repairing it. The reason is that old pipes become brittle with time due to continuous exposure to water and tend to break. It can so happen that the old pipe that you have recently got repaired, develops a new crack. This means that you have to again spend on getting this leak repaired. This increases the hassle as well as the expense. Therefore, it is better to spend on a new pipe now rather than spending multiple times in the future.

Tips for repairing burst pipes: Switch off electricity supply to the room- The main water supply pipes are usually present in the attic or basement. When a pipe bursts, you should not only stop the water supply but also the electricity supply to that room. This precaution is necessary because you can get electrocuted by wading through the flood of water if any electric wire becomes loose or if the water comes in touch with an electric socket. Water and electricity is a fatal combination which can prove to be life-threatening. So you should be careful about it.