#1 Rated 24X7 Plumbing Companies Napakiak 99634 AK (844-507-4350)

Posted by in Plumbing Companies, on December 5, 2017

Plumbing Emergency Firms in Napakiak Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Napakiak 99634 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Napakiak 99634 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Napakiak 99634 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Napakiak 99634 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Napakiak Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Napakiak 99634 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Napakiak 99634 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Napakiak 99634 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Napakiak 99634 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Shageluk 99665 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Nunam Iqua 99666 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Skwentna 99667 AK (844-507-4350)

Ways in Which You Can Prevent Water Damage: Test your sump pump- Sump pumps help in pumping out the water that gets accumulated in the sump basin. These pumps are mostly found in the basements of houses. Sump pumps come in handy during torrential rain or thunderstorms. They get turned on automatically when the sump basin gets filled with water. However, these pumps can become defunct if they are not used for a long time. You need to test whether your sump pump is in proper working condition or not. It is better to keep a spare one as backup so that your house does not get flooded during storms.

“Plumber’s putty,” can damage plastic and it can leave stains.

Always know where the main water shut-off valve is located in case of a leak.

Repair broken and cracked windows and doors to prevent frozen pipes.

Keep in mind that homeowner’s insurance provides coverage for damage that is sudden and accidental. Damage that results from lack of maintenance is not covered on a standard homeowners insurance policy. If it’s too late and you’re already dealing with a wet disaster, check out advice on how to minimize water damage in your home.

Bring in some posh accessories. Search for items that can change the look of your bathroom dramatically without anyone picking up a wrench. Those could include a new shower curtain, plush bath sheets, a new rug, a magnifying makeup mirror or perhaps a flower in a vase. “Don’t cheap out on your towels,” Redd says. “Bamboo towels are phenomenal. They last forever.”

Understand standard bathroom dimensions. Knowing a few key measurements, like the size of a typical bathtub and how much space is needed for a toilet, will help you plan your remodel more efficiently.

Plan a lighting scheme. The best approach to a well-lit space is to incorporate layers of task, accent, ambient and decorative lighting.

Shower valves: If you are going to design a new bathroom, don’t forget to make sure that you can access the shower and tub valves from the backside of the wall. Placing valves on any outside wall is not a good idea.

Check appliances regularly: Check and maintain your home appliances regularly for leaks, according to manufacturer’s directions.

A float switch is the most common sump pump automatic switches.

Save Money on Bathroom Modelling – Make decisions early. Start prowling the aisles at the hardware store or home center way before the wrecking crew shows up. Get a good feeling for what you want in fixtures and appliances and what they cost. If you aren’t absolutely specific up front about what you want, you’ll have to rely on your contractor’s estimate, called an allowance, and his notion of what is acceptable may be quite different from yours. “Ninety–eight percent of the time, allowances are too low,” says Tom Silva. For instance, you may have had a glass–tile backsplash in mind, but your contractor’s bid was for ceramic.

Act quickly if your pipes freeze! Shut down this type of water and open the faucet, enabling it to empty when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer on the pipe – this will quickly defrost it. You might wrap the pipe inside a heating pad or aim a heat lamp at it, but this may take quite a while. A last resort is to wrap the pipe in rags and pour boiling water over it.

Automatic Washing Machine Water Shutoff Valve and Leak Sensor – This “intelligent” valve does it all to protect against catastrophic water damage from a burst inlet hose connected to a washing machine that is in use or unattended! It allows water to flow only when it senses that the washing machine is turned on and stops water from flowing if the machine is turned off. It also stops water from flowing if it senses excessive water flow or detects a leak. Easy to hookup yourself. Can be found online for under $200. A great investment to prevent all washing machine leaks regardless of the cause.

Repair problems early. A leaking faucet isn’t just annoying; the moisture it releases puts wear on sink fixtures and can encourage the growth of mold and mildew. Stay on top of problems to keep the household clean and dry.

Save Money on Bathroom Modelling – Consider look-alikes. Some imitations just make sense: Lumber giant Weyerhaeuser sells a fast-growing natural eucalyptus hybrid under the brand name Lyptus. Sustainably harvested in plantations in Brazil, the clear-grained hardwood looks and feels remarkably like mahogany. It’s sold as toungue-and-groove flooring and in planks and sheets for cabinetry and millwork. (Visit Lyptus.com to find a distributor near you.)

What to look for in your next contractor – Get quotes for your plumbing problem from at least 3 plumbers, but preferably more. If a company offers you a quote far lower than other companies you’ve called, be careful. It’s likely that they are either using sub par materials or are not including the full scope of the project.

Tips for maintaining plumbing during winter: Remove all garden hoses- The outdoor pipes and fixtures are exposed to the freezing temperatures during winter. It is necessary to prevent the pipes from getting frozen. For this purpose, you need to disconnect all the garden hoses from the water supply faucet so that there is no residual water in these hoses which can freeze up and burst. These should be taken indoors and stored till winter gets over. Water supply to the outdoor spigots should also be shut off to prevent pipes from freezing. All the excess water in these spigots should be drained by turning them on.

Tips for installing and repairing a gas line: Clean the gas pipeline after detaching it from the regulator- Most of the gas pipeline repair work is related to pipe clogging because residue gathers very fast in the small valves and parts of the pipeline. You need to detach the pipe from the regulator present in the cooktop. After detaching it, you need to use acetone to remove the dirt and soot that has got accumulated in the pipeline. The cleaning process should be done from time to time so that the pipe remains free from impurities and does not start leaking.

How to deal with water damage? Start cleaning up immediately- The longer you wait to start the cleaning process, the more damage is caused due to dampness. Things which could have been saved, reach a stage where they become beyond repair. Delay in cleaning up can cause the walls to become soft and weak due to moisture. It can lead to growth of mold which can be very difficult to eradicate. In order to avoid the financial costs of replacing so many damaged items, you should sort out the items and keep them out for drying. The flooring should be wiped clean after mopping of water and all ventilation sources should be opened to facilitate the drying process.

Ways to choose your plumber – Pricing – The plumber will know what he or she needs to do and will be able to give an accurate estimate, barring of course, any other major problems. Make sure to get at least three estimates, and be wary of any estimate that is much lower than the others. It could mean the plumber is cutting corners or plans to use inferior parts.