#1 Rated 24X7 Plumbing Companies Naknek 99633 AK (844-507-4350)

Posted by in Plumbing Companies, on December 31, 2017

Plumbing Emergency Firms in Naknek Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Naknek 99633 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Naknek 99633 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Naknek 99633 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Naknek 99633 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Naknek Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Naknek 99633 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Naknek 99633 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Naknek 99633 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Naknek 99633 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Scammon Bay 99662 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Sand Point 99661 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Seldovia 99663 AK (844-507-4350)

Tips for Fixing Low Water Pressure in Your Home: Locate the water pressure regulator- Many times a water pressure regulator is attached to the main supply valve. It is a wheel-like structure which can either decrease or increase the supply pressure. You can check whether your main supply valve has a regulator or not. If it is there, you can simply adjust it to increase the pressure of the flow of water to your house. It is better to leave this job to a plumber because the regulator is very tight and needs specific tools in order to make adjustments. The plumber also knows how much pressure your pipes can bear so he can make changes accordingly.

DIY plumbing jobs will need which you learn how to solder copper to the lines to the water supply. You can practice this skill which means you have the ability to run your lines without worrying regarding this leaking. Look online for video tutorials which can help you receive a handle on the way to soldering.

If your kitchen sink is clogged by grease, you can remove the clog by pouring ¼ cup of dish soap down the drain, wait about 20 minutes and then pour roughly a quart of boiling water in the drain

High-efficiency toilets do not cause problems with home plumbing systems

Don’t pour oils, grease or fat down the sink. When they cool, they may harden and make clogs within your drains. This is especially true for those who have a garbage disposal, as the fat may cause the blades to perform slower and less efficiently. Keep a container in your kitchen that is utilized specially for discarded grease.

Create a vanity from a piece of old furniture. “If you want to get creative, and you have that creative gene … you can create something unique,” Redd says. If your vanity is wood, refinish or paint it rather than buying a new one. She bought a used piece of furniture for $45, a cultured marble top for $150 and two sinks on closeout for $50 each, creating a unique double vanity for just $245.

Paint the walls. Avocado fixtures against white may look extremely dated. But change the walls to a complementary color, and “suddenly the avocado green is a player,” says Mary Anne Brugnoni, a designer with Renovations by the Morton Group in Fairport, New York. “Paint is your best friend.”

Vinegar: Tried and true method: Remove as much liquid as you can. Toss in 1 cup of baking soda, then pour down a cup of household vinegar, plug with the stopper then let sit for half an hour. After about 30 minutes, unplug and pour a kettle full of hot water on top. See this page from thegoodhuman.com and this this one from treehugger.com for more details. This is the method I’ve grown up with and it works even if there’s still liquid backed up (although it works faster without water). Just double the baking soda & vinegar amount, give it about an hour and things have fully emptied, dump more fresh batches of boiling water 2 or 3 times to completely clear out the gunk.

Check your pressure regulator because sometimes this can cause low water pressure. The pressure regulator is the device shaped like a bell with a screw at the end. You can normally find the pressure regulator either under the home or below the frontal connection. Often you just have to adjust the screw to restore pressure. Tighten the screw to boost the pressure. Make sure you set it between 45 – 60 psi.

Use a shop vacuum to remove hard objects. When a hard object like a toothbrush, comb or toy plugs a toilet or drain, a plunger may not be the solution—it might only push the obstruction in deeper. Instead, suck out the water and the obstruction with a wet/dry shop vacuum.

Small bathroom? A corner toilet is a great way to save space!

Prevention and Maintenance: Take note of possible build up of grease, hair or any material that can clog your drain. Remember that grease solidifies when it cools which could certainly occur inside your plumbing. The best that you can do is gather excess grease in a different container then dispose it when it solidifies. Though simple as they may seem, preventive measures can save you from further expenses and worries. Another option is to apply for a maintenance contract with a reputable plumbing company. If your plumbing system is regularly checked, you will surely be at peace of not having any major plumbing troubles in the future. A small amount of money spent now can save you a huge deal of money later on.

Sluggish or Slow: If you notice that things are emptying slower than usual but it’s not completely clogged or backed up yet, do the “Flush” technique right away to prevent a full blockage. Make sure to finish off with a few more hot water dumps.

You can remove that gross tub ring by sprinkling the tub with salt and taking half a piece of grapefruit use it as a scrubber

Save Money on Bathroom Modelling – Buy building supplies at auction. Brian Peppel, a homeowner in Phoenixville, Pennsylvania, attends one building–supply auction each month in nearby Lancaster County. His recent finds include two pallets of concrete block for $10 and a solid–wood prehung exterior door for $65. “Their inventory is everything under the sun, a lot of scratch–and–dent, misordered custom items, or new overstock supplies,” reports Peppel. He once watched the auctioneer’s gavel fall on a large, custom–made triangular window with an original retail value that he pegs at several thousand dollars. The winning bid? $1.

Do not assume that having a large horsepower sump pump will be the best choice for you, do your research before buying

What to look for in your next contractor – like with any other contractor, you should only hire a licensed plumber. Without a license, the plumber’s credentials are unverifiable, and more likely than not, they will show the same level of attention to your job as they did to their business.

Those toilet flushing tabs, are horrible for your toilet and will create major problems down the road

Save Money on Bathroom Modelling – Increase efficiency, not size. If you can reorganize and equip your kitchen for maximum utility, you may not need to blow out the walls to gain square footage. Start by replacing space–hogging shelves with cabinet–height pullout drawers 8 inches wide, containing racks for canned goods and other items. “You’re getting three or more horizontal planes where you might otherwise get only one,” says Louis Smith Jr., an architect with Meier Group, in Ann Arbor, Michigan. You could easily shell out a few thousand to outfit cabinets with upgrades like dividers, pull–out pot trays, and lazy Susans, but you’ll save many times that amount by skipping the addition you thought you needed.