#1 Rated 24X7 Plumbing Companies Mountain Village 99632 AK (844-507-4350)

Posted by in Plumbing Companies, on February 1, 2018

Plumbing Emergency Firms in Mountain Village Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Mountain Village 99632 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Mountain Village 99632 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Mountain Village 99632 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Mountain Village 99632 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Mountain Village Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Mountain Village 99632 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Mountain Village 99632 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Mountain Village 99632 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Mountain Village 99632 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Scammon Bay 99662 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Sand Point 99661 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Seldovia 99663 AK (844-507-4350)

Check the seal: The build up of soap can prevent a proper seal. Wipe the door seal carefully. Check to see if there are any areas where the seal is loose, torn or cracked and replace if necessary.

Double check your tile size. Surprisingly, that 12-inch by 24-inch tile you bought might not be exactly what it claims to be. That’s because most tile is sold in European sizes (millimeters), and the quoted size might also factor in a grout joint, putting your fancy new tile at 11?, which can affect your tile layout, niches and plumbing.

Deaden sounds with expanding foam. Fill the space between two stainless steel sink basins with expanding foam. The foam deadens vibrations and lessens the gong effect. It’s possible to do this with the sink in place but much neater and easier before installation. Either way, let the foam harden and then trim away the excess with a knife.

Water lines: With the passage of time, the galvanized water lines may rust or corrode. It’s a good idea to get copper lines. However, the plastic or PEX pipes can cost less, but are not as durable. Also, they don’t do the job so well.

Tips for Fixing Low Water Pressure in Your Home: Replace the pipes which are old- You should check all your old water supply pipes for clogging. If the supply pipes are made of steel, it is very likely that with time, these pipes have become clogged due to mineral corrosion and build-up. Any kind of obstacle in the water flow can cause the pressure of water supply to slow down. It is better to install copper or plastic pipes because the problem of corrosion does not occur in these pipes. Such replacement of the old steel pipes can remove all barriers to the proper flow of water and reinstate the normal pressure of water flow.

Doing some research before your heater fails will enable you to select one that most appropriately meets your needs.

Adding dish soap to the bowl is another method that might remove a clog

A dedicated electrical circuit should be used for the sump pump. Most pumps have a high amp load when starting

If you think your plumbing or heating equipment is due for any work it is always advisable to get it done in the summer before you need it as you don’t want to be left in the cold with a higher bill for emergency work.

Baking Soda, Vinegar, Gravity, and Pressure: If your bath drain is clogged, mix up some of the baking soda/vinegar mentioned in tip two. Pour it down the drain, and then place the stopper over it. After 45-60 minutes, fill the bathtub with water. Then, remove the stopper. The pressure of 40-60 gallons of water should be enough to dislodge the blockage that has been loosened by the baking soda and vinegar. You could also try some plunging or the drain snake in conjunction with the weight of the water.

Learn how to tackle small problems. With a few tools and a little knowledge, most of us can handle small plumbing emergencies. With a plunger, a pipe wrench and a sewer snake in your tool kit, you’ll be able to take care of small problems like clogged drains, blocked toilets, stuck valves and dripping faucets. How-to books, home improvement stores and adult education classes can pay for themselves when it’s time to call the plumber.

To clean your dishwasher, pour ½ cup of white vinegar into the detergent cup and simply run the empty machine for one full cycle.

Tips for Fixing Low Water Pressure in Your Home: Do not use all the faucets at the same time- It is the most obvious reason for low pressure of water. Generally, when all the members of the family are at home, the use of faucets increases. This usually happens in the morning and the evening. When all the faucets work at the same time, the water supply to the individual faucets decreases. In order to avoid this problem members of the family should make use of the faucets one buy one. This ensures that all the members experience a proper flow of water.

Install non-aerating low-flow faucets and shower heads, to save major bucks on your water bill

Save Money on Bathroom Modelling – Limit recessed light fixtures. The more recessed lights you put in, the more it’s going to cost,” says Tom Silva, This Old House’s general contractor. In addition to the fixtures, there’s the labor to cut all the holes and insulate them properly. A wall– or ceiling–mounted light can also deliver more wattage, which means you may be able to get away with fewer fixtures.

Although most water heaters last 10-15 years, it’s best to start shopping for a new one if yours is more than 7 years old.

Look for Leaks: It’s important that you inspect your bathroom for any signs of leaks. While leaks may seem minor, they can develop into a serious problem, leaving you with lots of water damage to repair and mold to clean. Keep an eye and ear out for leaks so that you can have it fixed as soon as possible. When it comes to taking good care of your home, ensure that your home’s bathroom plumbing is in great condition. For assistance with all your plumbing needs, contact the experts at Thousand Oaks Plumbing. Located in Thousand Oaks, California we help the Conejo Valley, Ventura County, and San Fernando Valley with all their water conservation and plumbing needs.

Vinegar: Tried and true method: Remove as much liquid as you can. Toss in 1 cup of baking soda, then pour down a cup of household vinegar, plug with the stopper then let sit for half an hour. After about 30 minutes, unplug and pour a kettle full of hot water on top. See this page from thegoodhuman.com and this this one from treehugger.com for more details. This is the method I’ve grown up with and it works even if there’s still liquid backed up (although it works faster without water). Just double the baking soda & vinegar amount, give it about an hour and things have fully emptied, dump more fresh batches of boiling water 2 or 3 times to completely clear out the gunk.

Tips for maintaining your bathroom plumbing: Prevent pipes from freezing in winters- Frozen water pipes are a common phenomenon during winter. If a pipe freezes up, it can burst in a short time if it is not thawed. However, you can prevent the pipes from freezing with the help of pipe insulation techniques. There are insulating pipe sleeves which are available that protect the pipe from cold temperatures. You can also seal doors and windows tightly to avoid cold air from coming into the room. Maintaining the house temperature at an adequate level can prevent pipes from freezing. You should make use of all the faucets so that water is not allowed to freeze. Such preventive measures are much better than spending on repairing or replacement of a burst pipe.