#1 Rated 24X7 Plumbing Companies Minto 99758 AK (844-507-4350)

Posted by in Plumbing Companies, on January 17, 2018

Plumbing Emergency Firms in Minto Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Minto 99758 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Minto 99758 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Minto 99758 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Minto 99758 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Minto Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Minto 99758 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Minto 99758 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Minto 99758 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Minto 99758 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Chefornak 99561 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Chignik 99564 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Chevak 99563 AK (844-507-4350)

Have an older shower head? You can save up to 7.5 gallons of water per minute by replacing it with a newer model.

Do not install the water heater in an unheated basement.

Ways to choose your plumber – Pricing – The plumber will know what he or she needs to do and will be able to give an accurate estimate, barring of course, any other major problems. Make sure to get at least three estimates, and be wary of any estimate that is much lower than the others. It could mean the plumber is cutting corners or plans to use inferior parts.

Repair problems early. A leaking faucet isn’t just annoying; the moisture it releases puts wear on sink fixtures and can encourage the growth of mold and mildew. Stay on top of problems to keep the household clean and dry.

Sluggish or Slow: If you notice that things are emptying slower than usual but it’s not completely clogged or backed up yet, do the “Flush” technique right away to prevent a full blockage. Make sure to finish off with a few more hot water dumps.

No need to monitor the ongoing work: Supervising the work in progress is a smart choice. Never neglect the ongoing work and workmanship. A plumber is always more cautious in delivering quality service if the work is being monitored by the owner throughout the process of gas line repair in Mansfield, TX. This will also help in learning some new technicalities and basics which you would miss otherwise.

Ways to Unclog Drains: Buy a snake pipe to pull out the obstacle- This is a cleaning equipment which is very effective. It has to be used manually to bring out the things which are obstructing the drainage system. The snake pipe has a flexible metal spiral string at one end which can be pulled out and extended to slide into the pipe like a snake and after reaching the point of the clog; it can dislodge it and pull it out. The snake pipe should be used after opening the drain pipe from below. This can effectively remove the obstacle in a short time.

Point a heat lamp towards exposed pipes during the cold season.

Disconnect outside water hoses. This also prevents frozen pipes.

A spring loaded timer that attaches directly onto your outdoor faucet, will help prevent you from over or under watering your garden

Rid Faucets of Mineral Build-Up. White vinegar is a home plumbing must-have. Place it in a plastic baggie, hang that bag on the faucet with a rubber band, and let it soak for twenty-four hours. The vinegar naturally breaks down mineral deposits that limit water pressure.

Double check your tile size. Surprisingly, that 12-inch by 24-inch tile you bought might not be exactly what it claims to be. That’s because most tile is sold in European sizes (millimeters), and the quoted size might also factor in a grout joint, putting your fancy new tile at 11?, which can affect your tile layout, niches and plumbing.

Pay attention to how hardwood meets a tile floor. Chances are, your bathroom will have a tile floor, but the hallway or room it’s connected to will have something totally different, like hardwood. The transition between these two spaces and materials is something that’s tough to get right. As in most cases, planning ahead will give you results that meet your expectations.

Ways to Prevent Washing Machine Leaks: Make lesser use of the detergent- It is a misconception that using more detergent can result in cleaner clothes. The detergent that you use on a daily basis acts as a water softener and leaves behind a sticky residue in the drain pipe of the washing machine. This residue can accumulate over time and can clog the overflow tube of your washer. As the drainage system gets blocked, the water in the hose builds up the pressure and causes small cracks in the pipe through which water starts leaking. It is better to cut down on the usage of detergent rather than spending on a new hose for replacing your broken one.

Always know where the main water shut-off valve is located in case of a leak.

Save Money on Bathroom Modelling – Demolish the whole house and start from scratch. “Most clients don’t want to hear those words,” says Paul Irwin, design director with Landis Construction, in the Washington, D.C., area, “but it really needs to be considered on major remodels.”In one case, for example, plans for a 1,300–square–foot addition revealed that the house’s existing foundation wasn’t up to code and would have to be replaced—a $30,000 proposition. After crunching the numbers, the owners concluded that it would cost as much to update the house, a former summer cottage, as it would to reproduce it new. “For a relatively small additional cost,” says the owner, “we get all the benefits of new construction while preserving the character and feel of our old house.”

Ways to Unclog Drains: Your dish detergent can unclog your pipe- Something as simple as a dish detergent can be used to remove obstacles from the drain pipe. You need to pour a small quantity of the liquid detergent down the drain and follow it up with some boiling water. The detergent can lubricate the sides of the drain and force the dirty residue to break into smaller components and the hot water can flush away the grease. You can make use of a plunger to push down the remaining dirt and clean your pipe.

Check your water pressure: If the water pressure to your home is set too high, pipes and hoses may fail under the pressure. Buy a water pressure gauge at a local hardware store, attach it to an outside faucet, and turn the faucet to full force. The gauge will give you a reading of the home’s water pressure. Typical residential water systems are designed for water pressure of 40 to 70 psi. If your home’s water pressure exceeds 100 psi, install a pressure regulator (which is available at hardware stores as well.)

Tips for repairing burst pipes: Contact a plumber- A burst pipe cannot be repaired effectively by you because it requires the use of certain tools. After taking the initial measures of stopping the water supply and clamping a rubber seal on the leak, you should contact a plumber to come and take a look at your pipe and provide a solution for the problem. The plumber can guide you whether there is the requirement of a repair or the pipe needs to be replaced. He has the right instruments and parts to repair or replace the pipe and bring it back to the proper working condition.

Always test your plumbing for leaks before finalizing anything.

Save Money on Bathroom Modelling – Partner with a contractor. Though the practice is controversial among the trades, some contractors will offer consulting and mentoring services to skilled do–it–yourselfers on an hourly basis. Chicago–area builder Ted Welch charges $150 per hour for such coaching, with a two–hour minimum commitment. “The most satisfied clients tend to be those who have good manual dexterity, who realize that skills need to be practiced in order to be perfected, and who are willing to risk making a few mistakes and then learn from them,” he says.