#1 Rated 24X7 Plumbing Companies Meyers Chuck 99903 AK (844-507-4350)

Posted by in Plumbing Companies, on December 3, 2017

Plumbing Emergency Firms in Meyers Chuck Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Meyers Chuck 99903 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Meyers Chuck 99903 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Meyers Chuck 99903 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Meyers Chuck 99903 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Meyers Chuck Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Meyers Chuck 99903 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Meyers Chuck 99903 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Meyers Chuck 99903 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Meyers Chuck 99903 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Savoonga 99769 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Ruby 99768 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Selawik 99770 AK (844-507-4350)

Slip joint pliers can be used to loosen the collar nuts on a drain line.

A float switch is the most common sump pump automatic switches.

You can use half a lemon to rub away any hard water stains on yourfaucets.

Getting your boiler and central heating system serviced and checked in summer is often ideal as you can do it in your own time, as opposed to expensive emergency call outs over the winter. And once it’s done, you can rest easy in the sun, knowing that when the colder months arrive you’ll be tucked up in the warm.

Consider “smart” bathroom timers and humidity sensors: Bath fan timers are important because excess humidity can cause everything from window condensation and mildew to moisture and rot inside walls. Some new wall switch timers have dual controls for turning off both lights and fans after a preset time. For the ultimate in smart bath fan timers, buy a humidity-sensing fan designed to automatically turn on and off as moisture levels at the ceiling rise and fall.

Upgrade washing machine hoses: Old, brittle or leaky washing machine hoses are among the most frequent causes of water loss for homeowners. Replace yours regularly to avoid a mighty mess and expensive damage.

Know where to go when trouble happens. Should plumbing fail, will you know how to stop the flood? Locate the main shut-off valve for the home water supply. If it’s in a dark, hidden, or hard-to-reach place, gather any tools you’ll need for a quick shut-off, and store them nearby. There’s nothing like the frustration of a missing flashlight or a misplaced shut-off key when water’s pouring down the stairs from a broken pipe.

Tips for maintaining plumbing during winter: Shut off your main valve before going for a trip- Winter brings the holiday season with it. Many people make travelling plans during this time of the year. One of the things that people need to keep in mind is to shut the water supply to their houses. It is important to shut off the main water valve before leaving to prevent pipes from getting frozen up because of the presence of residual water when you are away. This small precaution can save you from a lot of hassle when you come back and allows you to enjoy your vacation in a stress-free manner.

If pipes do freeze, don’t panic. First, shut off the water supply to the house, then open a faucet near the blocked area to vent vapors from the frozen water. If you suspect that pipes in the hot water system are frozen, turn off the hot water heater. Use a hair dryer to warm the frozen pipe (never use an open flame to thaw a pipe), starting at the end of the pipe nearest to the tap. (Don’t use a hair dryer in areas of standing water.) You’ll know the pipe has begun to thaw when water begins to trickle from the open faucet. When the flow is restored, check the plumbing carefully for cracks or leaks.

Bathroom Remodelling Tips – Establish a realistic bathroom remodelling budget. At this time you will also need to determine how you will finance your bathroom remodel. Do you have a savings that you can dip into or will you need get a loan? The answer to this will be a factor in determining your budget. Will this be a larger remodel or are you making minor changes? When establishing your budget keep in mind the design ideas you would like and whether they fall on the pricier side. Also, it will always be less expensive if you don’t need to relocate plumbing fixtures, such as toilets or sinks, so if you are on a smaller budget it is more economical to incorporate your current bathroom layout into the new design.

Ways in Which You Can Prevent Water Damage: Never pour grease or fat down your sink- Generally, people have a tendency to throw the oil used for frying into their sinks because they think that it will get drained just like water. However, fat and grease quickly clog the pipes and do not allow water to get drained. Instantly, the water gets trapped into your sink and overflows. You have to spend time in mopping up the extra water so that it does not settle into the flooring and cause dampening. You should opt for old disposable jars to store the used oil and throw it away along with the other waste. This can save you a lot of time and trouble.

Dish Detergent: If your toilet is clogged, pour 1/4 cup of dish detergent in the bowl. Then boil some water. The dish soap will act as a lubricant and help break up any greasy residue. Then pour the hot water down, and get ready to start plunging. If the plunger doesn’t cut it, rubber gloves may be the next option.

Save Money on Bathroom Modelling – Demolish the whole house and start from scratch. “Most clients don’t want to hear those words,” says Paul Irwin, design director with Landis Construction, in the Washington, D.C., area, “but it really needs to be considered on major remodels.”In one case, for example, plans for a 1,300–square–foot addition revealed that the house’s existing foundation wasn’t up to code and would have to be replaced—a $30,000 proposition. After crunching the numbers, the owners concluded that it would cost as much to update the house, a former summer cottage, as it would to reproduce it new. “For a relatively small additional cost,” says the owner, “we get all the benefits of new construction while preserving the character and feel of our old house.”

Ways to Unclog Drains: Pour boiling water down the drain- This is a quick fix for the problem of clogged drains. Be it bathroom drains or kitchen sink drains, you can pour a significant quantity of boiling water into the drain pipe. This process should be repeated twice or thrice at small intervals. The boiling water can help to dissolve the settled grime along the sides of the drain pipe and break it into small parts so that the waste can flow down with the water and get drained, leaving the pipe clean.

Change the showerhead. You can buy a rain showerhead, massage showerhead and other models that will give your bathroom a spa look and feel as well as improve your shower experience. Most of the time, you can make the change in five minutes with a wrench.

Ways to choose your plumber – Insurance – Plumbers should be insured. In some cases, they may also need to be bonded as well. Insurance will protect both you and the plumber in case of an injury or accident.

Stops: You should also check to make certain that the stops under each sink and at the back of toilets could be turned without any problem. This way you can close them if you experience a problem.

Spot the sewer valve. Finally, hunt down the location of the household’s main sewer valve. It’s there to provide access to correct a clogged sewer line; don’t make the Roto-Rooter man spend pricey labor time looking for it when the toilets overflow.

Act quickly if your pipes freeze! Shut down this type of water and open the faucet, enabling it to empty when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer on the pipe – this will quickly defrost it. You might wrap the pipe inside a heating pad or aim a heat lamp at it, but this may take quite a while. A last resort is to wrap the pipe in rags and pour boiling water over it.