#1 Rated 24X7 Plumbing Companies Marshall 99585 AK (844-507-4350)

Posted by in Plumbing Companies, on November 19, 2017

Plumbing Emergency Firms in Marshall Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Marshall 99585 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Marshall 99585 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Marshall 99585 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Marshall 99585 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Marshall Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Marshall 99585 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Marshall 99585 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Marshall 99585 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Marshall 99585 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Douglas 99824 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Elfin Cove 99825 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Auke Bay 99821 AK (844-507-4350)

Observe the outlet on your sump pump to make sure water is actually being pumped

Perform a pipe inspection to check for leaks. You may have to look into some hard to see places such as under the home so make sure you use a flashlight. If you find a water leak in a pipe, you will have to get it repaired or replaced. You will have to shut off the main water valve so it can be repaired. It is wise to hire a plumber to do the job.

Tips for installing and repairing a gas line: Do not attach the gas line tightly- This is a small detail which needs to be kept in mind while attaching a pipe line. It is better to keep the attachment a little loose because tightening of the gas line can create a tremendous pressure on the pipe and cause new leaks. It is also important to check that the low pressure pipe line is not interfering with the high pressure gas line. Wherever there are chances of any leaks, you should wrap rubber tape around it in order to seal it properly.

Water Trickling Into the Tank: If you hear a sustained hissing sound coming from your toilet, it’s probably a result of water trickling into the tank via the supply line. In this case the parts to check are the float, the refill tube and the ballcock or inlet-valve assembly. The hissing sound is typically caused by water coming through the inlet valve. First check to see whether the float is sticking or needs adjusting. Next, check to make sure the refill tube isn’t inserted too far into the overflow tube. (It should extend only about 1/4″ below the rim of the overflow tube.) If neither of these adjustments solves the problem, you’ll probably need to replace the ballcock assembly as described above.

Prevent Frozen Pipes: One major plumbing maintenance tip, especially for winter, involves preventing frozen pipes. To do this, keep a small drip of water running all winter long or wrap plumbing insulation around your pipes.

Act quickly to stop a leak: A gushing plumbing leak can dump several gallons per minute into your home. You have to act fast to stop the stream. Shutting off the main water valve is an obvious move. But there may still be a few gallons of water held in pipes above the leak. Turn on the lowest faucet in the house, which will let the water harmlessly drain out of the faucet instead of through the leaking pipe.

Use a bucket of water to flush the toilet. You don’t have to run to the neighbor’s bathroom during a plumbing project. Before you turn off the water supply, fill 2- gallon buckets with water. Flush the toilet by dumping the water in the bowl. You’ll get one flush per bucket. Works just as well as the usual method, although it won’t refill the bowl.

Save Money on Bathroom Modelling – Don’t move the kitchen sink. Or the toilet, if you can avoid it. “That often becomes the biggest part of the plumbing–price increase,” says Richard Trethewey, This Old House plumbing and heating expert. If your new layout requires that you move the toilet, use the opportunity to upgrade the pipes at the same time. “That will save you money in the long run,” says Richard.

Tips to Hire a Local Contractor: Ask Friends and Family for Referrals. Your friends and family are sure to be upfront with you about their experience with plumbing companies that they’ve used. If they had a good experience, definitely ask them for an estimate. It’s very important to get your referrals from people that you know and trust.

Tips for Fixing Low Water Pressure in Your Home: Check individual faucets- If one of your faucets is not providing adequate flow of water, you need to check whether the problem is just with that faucet or with all the faucets. In case only one faucet turns out to be faulty, you can check what is restricting its flow. The aerator may be clogged, the stop valve may be partially closed or the washer may be dislodged. Once you identify the fault, you clean it out or remove it. You can also check the supply valves which are present below the faucets to see whether the valve is completely open or not. This can solve the problem.

Create a vanity from a piece of old furniture. “If you want to get creative, and you have that creative gene … you can create something unique,” Redd says. If your vanity is wood, refinish or paint it rather than buying a new one. She bought a used piece of furniture for $45, a cultured marble top for $150 and two sinks on closeout for $50 each, creating a unique double vanity for just $245.

The best way out is to make a short list of highly regarded plumbing companies, then ask for price quote from each. Read customer reviews or you can request for contact information of their past clients. With mediocre plumbers deleted from the list, you can now opt for the least expensive one.

DIY plumbing jobs will need which you learn how to solder copper to the lines to the water supply. You can practice this skill which means you have the ability to run your lines without worrying regarding this leaking. Look online for video tutorials which can help you receive a handle on the way to soldering.

Resolve Issues Early: It might seem easy enough to think that the little leak in your bathroom faucet can wait until later to get fixed. However, you will be thankful that you took care of the situation early on before it got bigger and more expensive.

Occasionally, the ferrules in a supply tube can get scratched or dented causing water to leak. Use Teflon tape around the ferrule until a permanent repair can be made.

Get a copy of the Uniform Plumbing Code to make sure your plumbing is up to par.

Wrenches are essential in plumbing. A pair of medium sized slip joint pliers and an adjustable wrench should cover most jobs, along with various sized wrenches.

Check the seal: The build up of soap can prevent a proper seal. Wipe the door seal carefully. Check to see if there are any areas where the seal is loose, torn or cracked and replace if necessary.

Tips for maintaining plumbing during winter: Repair leaks immediately- If any of your water pipes have developed small leaks, you need to repair them before winter sets in. The cracks can increase the risk of freezing of pipes because water keeps dripping from them. In winter, icicles get formed near the cracks and force them to widen and burst in the long term. It is better to repair them when the water is still running at full force so that you can check for any remaining leaks and repair them immediately.

Tile a smaller area. Instead of tiling all the bathroom walls, tile only around the tub and shower, and use drywall for the rest of the area.