#1 Rated 24X7 Plumbing Companies Kwethluk 99621 AK (844-507-4350)

Posted by in Plumbing Companies, on November 20, 2017

Plumbing Emergency Firms in Kwethluk Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Kwethluk 99621 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Kwethluk 99621 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Kwethluk 99621 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Kwethluk 99621 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Kwethluk Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Kwethluk 99621 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Kwethluk 99621 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Kwethluk 99621 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Kwethluk 99621 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Pilot Point 99649 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Platinum 99651 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Pilot Station 99650 AK (844-507-4350)

Ways to choose your plumber – Licensure – Most states require plumbers to hold a license, though a couple of states like New York and Kansas do not. If your state does not require licensing, check to see if there have been any formal complaints filed against the plumber you are considering.

Both tape and dope work equally as well when you’re sealing pipe threads

Ways to Prevent Washing Machine Leaks: Keep the washer lint-free- It does not seem likely that something as minute as lint can cause trouble. However, lint has a tendency to accumulate over time in the drain pipe and clog it. You need to take measures to prevent lint accumulation so that water can drain easily from the machine. There are mesh lint catchers available which do not cost much. You can attach them to the end of the drain pipe. These can help in removing lint from the pipe. You have to change these lint catchers every month to keep the pipe line-free.

To determine the size of sump pump you need, you must know how much water you’ll need to be pumped, how high the water will be pumped and the length and size of pipe.

Pouring chemicals down your drain will corrode the pipes.

Staying in building during a major gas leak: The peculiar odor of gas is an obvious indication of a major gas leak in the house or the building. It is crucial that you leave the place/building immediately without causing a delay in figuring out the reason for smell. It’s time you should immediately call for the professional assistance of gas line repair in Mansfield, TX. Meanwhile, the best you can do is to cut off the supply, through an emergency switch or gas meter.

Tips for installing and repairing a gas line: Do not attach the gas line tightly- This is a small detail which needs to be kept in mind while attaching a pipe line. It is better to keep the attachment a little loose because tightening of the gas line can create a tremendous pressure on the pipe and cause new leaks. It is also important to check that the low pressure pipe line is not interfering with the high pressure gas line. Wherever there are chances of any leaks, you should wrap rubber tape around it in order to seal it properly.

Natural gas, oil and propane water heaters are less expensive to operate than electric models.

If you feel like the water pressure from your shower is consistently decreasing than it may be time to clean the head. This can be done by dipping the head in a CLR solution.

No need to monitor the ongoing work: Supervising the work in progress is a smart choice. Never neglect the ongoing work and workmanship. A plumber is always more cautious in delivering quality service if the work is being monitored by the owner throughout the process of gas line repair in Mansfield, TX. This will also help in learning some new technicalities and basics which you would miss otherwise.

If your water pressure is too high, like over 80 pounds per square inch for example, it can cause damage to your faucet and create a leak

Bathroom Design Tips – Curbless Shower with a Bench and Grab Bars – This doesn’t have to look as antiseptic as it sounds. Think in terms of a tiled shower area with recessed shelves at arm’s level to stop you from having to stoop down to the floor or reach up to a shower rack. Add a matching ceramic bench and grab bars that come in brushed nickel, chrome or bronze to match your faucet hardware. They will look more upscale than the white plastic hospital variety.

Use a five gallon bucket as a tool holder. And if a leak springs mid-project, it’ll catch the water. A tool caddy can also be attached to the bucket providing a place for everything.

Ways to Prevent Washing Machine Leaks: Check your hoses regularly- Hoses are the main sources of leaks in washing machines. The reason for this is that the force of the water flow in the hoses creates stress on the pipes and leads to small cracks with time. This is quite natural given the amount of pressure that the hose undergoes. You should check your hoses periodically to identify any leaks and get them repaired immediately if you spot any. You can check for leaks by squeezing the hose. If it feels squishy, it is an indication that there is a leak somewhere. You need to replace the pipe as soon as possible to prevent the formation of bigger cracks which can cause flooding.

Don’t go crazy when using detergents, bleach or other chemicals, over using these products can kill the natural bacteria that your septic system needs

Alternatives to Tile: The bath doesn’t have to have tile to the ceiling: consider alternatives like reclaimed wood panels, board and batten, or beadboard as high-end looking tile replacements. Wood requires more maintenance, but also gives off a much warmer, comforting vibe than tile.

Always know where the main water shut-off valve is located in case of a leak.

Ways to Prevent Washing Machine Leaks: Use a washer floor tray- This is an inexpensive way to prevent leaks from causing a lot of damage to your laundry. You can place a washer tray under your washing machine so that if there is a leak in the future, the water can get accumulated in the tray instead of spreading to the whole room. It is a small precaution which can minimize water damage and slow down the overflow process. The washer tray can also come in handy if you cannot afford to get a repair or replacement done at the moment.

Spot the sewer valve. Finally, hunt down the location of the household’s main sewer valve. It’s there to provide access to correct a clogged sewer line; don’t make the Roto-Rooter man spend pricey labor time looking for it when the toilets overflow.