#1 Rated 24X7 Plumbing Companies Kodiak 99619 AK (844-507-4350)

Posted by in Plumbing Companies, on November 14, 2017

Plumbing Emergency Firms in Kodiak Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Kodiak 99619 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Kodiak 99619 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Kodiak 99619 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Kodiak 99619 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Kodiak Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Kodiak 99619 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Kodiak 99619 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Kodiak 99619 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Kodiak 99619 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Napakiak 99634 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Nikiski 99635 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies New Stuyahok 99636 AK (844-507-4350)

Tips on Hiring a Plumber: Meet the plumber face-to-face before hiring him- It is not necessary that the person you talk to on the phone is the same person who comes to your house to do the plumbing repair work. It is important to check the credentials of this person and his experience before asking him to do the job. The plumber should be able to answer your queries without fumbling. You can convey your concerns to the plumber by showing him the fault in your plumbing system. The discussion with the plumber regarding various solutions is more convenient when you get to meet him in person.

Tips for Fixing Low Water Pressure in Your Home: Replace the pipes which are old- You should check all your old water supply pipes for clogging. If the supply pipes are made of steel, it is very likely that with time, these pipes have become clogged due to mineral corrosion and build-up. Any kind of obstacle in the water flow can cause the pressure of water supply to slow down. It is better to install copper or plastic pipes because the problem of corrosion does not occur in these pipes. Such replacement of the old steel pipes can remove all barriers to the proper flow of water and reinstate the normal pressure of water flow.

Ways to choose your plumber – Warranty – All plumbers should guarantee their work, including the parts. Many warranties cover the plumber’s work for up to one year. If the plumber refuses to guarantee his or her work, move on.

Prevent Frozen Pipes: One major plumbing maintenance tip, especially for winter, involves preventing frozen pipes. To do this, keep a small drip of water running all winter long or wrap plumbing insulation around your pipes.

Sump pumps usually come with an automatic on/off switch for your convenience

Installing a special pressure pump will help raise pressure if all other repair options fail. The pump fills with water and then fills partly with air to keep an even pressure in your water lines. If you believe the problem is something serious that you have not been able to identify, you should enlist the services of a professional plumber.

Choose chrome rather than brushed nickel fixtures. It’s cheaper, and there are more choices. And chrome is even making a comeback, Brugnoni notes.

How to deal with water damage? Do not panic- The process of dealing with water damage can be quite intimidating and tedious. It is important to remain calm at such a time and deal with things in an efficient manner. You need to assess the situation and make a plan for damage repair. Following a step by step process can make the task easy and quick. You should seek help from the specialists and follow their instructions to minimize the water damage.

Keep an eye out for trouble. When it comes to plumbing, little leaks can lead to big problems. Be alert to signs of impending plumbing failures: Leaking faucets, damp cabinets, rocking toilets or dripping refrigerators all signal problems that need prompt attention.

Bathroom Design Tips – Curbless Shower with a Bench and Grab Bars – This doesn’t have to look as antiseptic as it sounds. Think in terms of a tiled shower area with recessed shelves at arm’s level to stop you from having to stoop down to the floor or reach up to a shower rack. Add a matching ceramic bench and grab bars that come in brushed nickel, chrome or bronze to match your faucet hardware. They will look more upscale than the white plastic hospital variety.

Replace Outdated Faucets. Is it time to replace an outdated kitchen or bathroom faucet? Your faucets do more than enhance the appearance of your sink. They also adjust the amount of water passing through. Over time, this can cause an increase in your water bill. Newer eco-friendly designs help control how much water is being used and reduce water flow by up to 30 percent or more. Just choose products with the WaterSense label backed by the EPA. Ask a Ragsdale plumber about installing new faucets in your home.

Repair problems early. A leaking faucet isn’t just annoying; the moisture it releases puts wear on sink fixtures and can encourage the growth of mold and mildew. Stay on top of problems to keep the household clean and dry.

Tips on Hiring a Plumber: Do not always go for the plumbing company which provides free estimates- You feel reassured when the plumber provides a free estimate for the plumbing job that you require to be done. The reason is that the free estimate gives you an idea regarding the expense that you have to bear for getting the repair work done. It is not necessary for you to choose the services of the plumber who provides with the free estimate. If your plumber gives you the estimate, it is a bonus. However, you should not equate an estimate with the quality of service because many times the plumbers who do not provide the free estimate are very skilled and experienced.

Only Go For Expert Plumbers & Compare Prices: Business around plumbing is very competitive and there are numerous entities offering such services. If you get the first plumber you can find, you may pay more than the regular rate. And please don’t be tempted to go for a company simply because of lower price quote. Plumbing system is a fundamental and vital part of your home; quality service should come first before anything else.

Check the aerator in the faucets to see if they need to be cleaned. Remove the aerator using pliers or a crescent wrench. You will find a small screen inside of the faucet head. Remove the screen and thoroughly rinse it. Before replacing the screen, turn on the water to see if the water is flowing properly.

Determine the appropriate fuel type for your water heater. If you are considering electricity, check with your local utility company for off-peak electricity rates for water heating.

Trusting the professional for its advertisement only: It is advisable to trust the reputation and service quality of a plumbing service by having a background check for its clients. Many non-professional service providers try to capture clients through attractive advertisements and marketing. Therefore, always be careful and never compromise over the business reputation of professional service providers.

The Wet & Dry Vacuum: If you have a wet & dry shop vacuum, it can become a terrific tool to unclog drains. First, set it to vacuum liquids. Cover up the vent to prevent a mess. Then, create the tightest seal you can over the drain. You may want to get creative and adapt an old plunger head for this purpose. With the vacuum turned on its highest setting, it can be powerful enough to draw the clog up the pipe and into the vacuum bag. It doesn’t always work, but it’s worth a shot.

Occasionally, the ferrules in a supply tube can get scratched or dented causing water to leak. Use Teflon tape around the ferrule until a permanent repair can be made.