#1 Rated 24X7 Plumbing Companies Kodiak 99615 AK (844-507-4350)

Posted by in Plumbing Companies, on November 4, 2017

Plumbing Emergency Firms in Kodiak Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Kodiak 99615 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Kodiak 99615 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Kodiak 99615 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Kodiak 99615 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Kodiak Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Kodiak 99615 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Kodiak 99615 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Kodiak 99615 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Kodiak 99615 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Denali National Park 99755 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Manley Hot Springs 99756 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Lake Minchumina 99757 AK (844-507-4350)

Ways in Which You Can Prevent Water Damage: Have a look at your washing machine supply lines- Washing machines have two water pipes connected to them- one for hot water and the other for cold. These water supply pipes can develop cracks over time and can cause leaking. This is a fairly common problem in most of the households because people do not pay attention to small leaks till the pipes burst and convert the whole house into a swimming pool. To avoid such a fate, you should check these supply pipes regularly for wear and tear. These pipes need to be replaced every five years to avoid bursting.

Know how to turn off the water heater. If it’s a gas water heater, turn the switch to the “pilot” position.

A clog can often be yanked out with an easy tool like a Zip-It or other flexible-shaft pick-up tool

Tips for repairing burst pipes: Make use of pipe clamps- In case there are no plumbers available when your pipe bursts, you can repair the pipe yourself with the help of clamps. There are various types of clamps available for different leaks. The pipe clamps come with hinges so that you can simply fix the clamp over the leak and tighten it with the help of screws. These clamps work very well during emergencies and are available every where at a low cost. They stop all kinds of leaks immediately and can act as permanent solutions too in case the leak is not very huge.

Plastic piping is much easier to install, adjust and tighten if a leak develops, than metal piping

Reduce Water Pressure: Many of the problems you are experiencing with your plumbing could be caused by too much water pressure. Be kind to your plumbing and reduce the water pressure as much as you can.

Keep an eye out for trouble. When it comes to plumbing, little leaks can lead to big problems. Be alert to signs of impending plumbing failures: Leaking faucets, damp cabinets, rocking toilets or dripping refrigerators all signal problems that need prompt attention.

Perform a pipe inspection to check for leaks. You may have to look into some hard to see places such as under the home so make sure you use a flashlight. If you find a water leak in a pipe, you will have to get it repaired or replaced. You will have to shut off the main water valve so it can be repaired. It is wise to hire a plumber to do the job.

Tips for Fixing Low Water Pressure in Your Home: Replace the pipes which are old- You should check all your old water supply pipes for clogging. If the supply pipes are made of steel, it is very likely that with time, these pipes have become clogged due to mineral corrosion and build-up. Any kind of obstacle in the water flow can cause the pressure of water supply to slow down. It is better to install copper or plastic pipes because the problem of corrosion does not occur in these pipes. Such replacement of the old steel pipes can remove all barriers to the proper flow of water and reinstate the normal pressure of water flow.

Tips for maintaining your bathroom plumbing: Pay attention to what you throw into the drains- People find it very easy to throw things into the toilets and drains because they think that everything gets flushed. However, many times, things get stuck in the drains because of such activities. You should not throw anything other than toilet paper into the toilet and the drains in the sinks should not be used to dispose unbreakable or insoluble stuff. You should not even throw chemicals into the drains because they are reactive and can corrode the pipes. It is necessary to follow these steps to save the effort of unclogging drains later.

Mirror Frame-Up: Dress up that builder-grade mirror with a fantastic frame, and at a fraction of the price of sourcing a huge hanging mirror. A frame will also hide any age-related wear, says Karen Gray Plaisted, a Warwick, N.Y.-based home stager and decorator. “I often tell clients to add a frame around their mirror to hide the flaking that can happen around the edges, and to give it a more updated look,” she says.

Use a strong magnet to find hidden pipes. When trying to locate a pipe under the floor, attach a rare earth (neodymium) magnet to an electrical fish tape and feed it into drain lines through the cleanout plug. Locate the magnet (and the pipe) under the floor using an ordinary compass, which will turn wildly when it finds the strong magnet.

Tips for maintaining plumbing during winter: Repair leaks immediately- If any of your water pipes have developed small leaks, you need to repair them before winter sets in. The cracks can increase the risk of freezing of pipes because water keeps dripping from them. In winter, icicles get formed near the cracks and force them to widen and burst in the long term. It is better to repair them when the water is still running at full force so that you can check for any remaining leaks and repair them immediately.

Consider leaving those vintage finishes. The point of your bathroom remodel might be a fresh, new look, but some things are easier to replace than others. For example, in older homes, wall tiles may have several coats of concrete and maybe wire lath. The difficulty in removing these can cause labor costs to skyrocket. Instead, you might want to keep the vintage tiles and spend your time and money elsewhere. And vintage finishes such as tile can be a cool feature as well.

How to deal with water damage? Start cleaning up immediately- The longer you wait to start the cleaning process, the more damage is caused due to dampness. Things which could have been saved, reach a stage where they become beyond repair. Delay in cleaning up can cause the walls to become soft and weak due to moisture. It can lead to growth of mold which can be very difficult to eradicate. In order to avoid the financial costs of replacing so many damaged items, you should sort out the items and keep them out for drying. The flooring should be wiped clean after mopping of water and all ventilation sources should be opened to facilitate the drying process.

If a sump pump fails, and water gets into the basement, do not attempt repairs without first turning off the power to all basement outlets.

Check the water inlet valve: Locate the water inlet valve and check to see if there is a leaky connection. It may be as simple as tightening the connection to prevent further leaking.

It’s a myth that low flow toilets don’t perform as well as regular flow toilets

The Wet & Dry Vacuum: If you have a wet & dry shop vacuum, it can become a terrific tool to unclog drains. First, set it to vacuum liquids. Cover up the vent to prevent a mess. Then, create the tightest seal you can over the drain. You may want to get creative and adapt an old plunger head for this purpose. With the vacuum turned on its highest setting, it can be powerful enough to draw the clog up the pipe and into the vacuum bag. It doesn’t always work, but it’s worth a shot.

Tips on Hiring a Plumber: Your plumber should be insured- Plumbers need to be covered by insurance. This is important for consumer protection. If something goes wrong during the plumbing repair service or an accident takes place, the consumer needs to be compensated for the losses. This is only possible if the plumber is insured. The cost of water damage repair is huge so you need insurance coverage. When you book a plumbing service, you should always check if the plumber is insured. This way you can get financial compensation for any damage caused by the plumber.