#1 Rated 24X7 Plumbing Companies Kasilof 99610 AK (844-507-4350)

Posted by in Plumbing Companies, on February 4, 2018

Plumbing Emergency Firms in Kasilof Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Kasilof 99610 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Kasilof 99610 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Kasilof 99610 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Kasilof 99610 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Kasilof Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Kasilof 99610 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Kasilof 99610 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Kasilof 99610 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Kasilof 99610 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Angoon 99820 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Juneau 99811 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Juneau 99803 AK (844-507-4350)

Do not use an extension cord to plug the pump into the outlet

Sump pumps usually come with an automatic on/off switch for your convenience

The most common causes of dripping faucets, are worn washers, bad internal seats or worn/faulty faucet cartridges

Know where to go when trouble happens. Should plumbing fail, will you know how to stop the flood? Locate the main shut-off valve for the home water supply. If it’s in a dark, hidden, or hard-to-reach place, gather any tools you’ll need for a quick shut-off, and store them nearby. There’s nothing like the frustration of a missing flashlight or a misplaced shut-off key when water’s pouring down the stairs from a broken pipe.

Sluggish or Slow: If you notice that things are emptying slower than usual but it’s not completely clogged or backed up yet, do the “Flush” technique right away to prevent a full blockage. Make sure to finish off with a few more hot water dumps.

Save Money on Bathroom Modelling – Tap your contractor’s sources. When it comes to things like flooring, ask your subcontractor if he has odds–and–ends stock left over from other jobs. While renovating a Civil War–era bed-and-breakfast in New Jersey some years back, contractor Bill Asdal needed wood flooring. He made a few phone calls and came up with hundreds of square feet of hardwood, in various lengths and widths, that otherwise would have gone into the trash on other job sites. Just by planing it to uniform thickness, then sanding and refinishing it, he saved his client almost $9,000 in materials costs.

Learn How to Do It Yourself: You shouldn’t attempt to solve all plumbing problems on your own, but there are some things that you should be prepared to do yourself. Knowing how to use a sewer snake, and learning the fine art of unclogging a drain are two cheap plumbing maintenance tips that will save you money in repairs.

Neglecting Annual House Inspection: The smart approach, to avoid the gas leak hazards, is to get the house inspection, annually. Only the professional services should be hired for inspection. Since gas lines are usually hidden from the plain view, therefore, only a professional can detect the unobvious and deterioration signs in gas lines.

Save Money on Bathroom Modelling – Hit the recycling center. Do–it–yourselfers can reap big savings with recycled or lightly used fixtures and building materials. Habitat for Humanity operates about 400 ReStores nationwide, which offer salvaged materials at half off home–center prices. One caveat: Many contractors won’t work with salvaged items, or homeowner–supplied materials in general, because they don’t want to assume the liability if something goes wrong. That said, if you’re doing your own work, you can find anything from prehung doors to acrylic skylights to partial bundles of insulation. (To find a ReStore near you, visit habitat.org.)

WaterSense labeled toilets meet or exceed plumbing standards

One of the greatest benefits of having your heating looked at now rather than waiting until something breaks, is that you have the luxury of time. Because you aren’t dealing with the pressure of a cold house, you can take your time to find a good plumber with reasonable prices, and can afford to wait a couple weeks for an appointment at a convenient time if need be.

Use a shop vacuum to remove hard objects. When a hard object like a toothbrush, comb or toy plugs a toilet or drain, a plunger may not be the solution—it might only push the obstruction in deeper. Instead, suck out the water and the obstruction with a wet/dry shop vacuum.

Clogged toilet? Let it sit for a few hours or overnight, then try flushing again. Often times this is all you’ll need to do, to fix the issue. Just be ready for the water to over flow if this doesn’t work.

Save Money on Bathroom Modelling – Don’t move the kitchen sink. Or the toilet, if you can avoid it. “That often becomes the biggest part of the plumbing–price increase,” says Richard Trethewey, This Old House plumbing and heating expert. If your new layout requires that you move the toilet, use the opportunity to upgrade the pipes at the same time. “That will save you money in the long run,” says Richard.

Do not use galvanized steel for your plumbing. Galvanized steel can be corrosion ridden. Copper plumbing is your best bet.

Plan the right height for your sink. Typical countertops are 32 to 34 inches off the floor. But you need to consider how your sink will add to or take away from the countertop’s height. If you have an above-counter vessel sink, for example, you’ll want to make your counter height lower so you can wash your hands or brush your teeth comfortably.

What to look for in your next contractor – like with any other contractor, you should only hire a licensed plumber. Without a license, the plumber’s credentials are unverifiable, and more likely than not, they will show the same level of attention to your job as they did to their business.

Consider a corner sink. If you’ve got a tight space with potential traffic-flow problems due to how the entry door or shower door swings open, then consider putting your sink in the corner to free up space.

Desperate Situation & Water Won’t Empty: Chances are if you do a treatment with baking soda and vinegar, have the stopper removed, and leave the backed up mess overnight, you’ll find the liquid should have emptied by the morning. The vinegar and baking soda should have worked some of the buildup free on its way down. Do a hot water flush first thing and if the liquid empties as quickly as it normally would, you should be ok–do a couple hot water dumps though just to make sure. However, if the liquid empties slowly, you might want to check the trap to make sure there’s no mass blocking it. If there isn’t, try a couple more treatments of the Flush throughout the day. You just might get away with not having to call in the plumber.

A pedestal sump pump works well if you have a smaller diameter basins

Poking & Taking Apart: Remove the trap or clean-out plug underneath the sink to try clearing the blockage. Use a plumber’s snake or a wire coat hanger to poke down and break apart the mass. You’ll need an empty bucket on hand to catch all the liquid as well as eye goggles firmly in place.

Check your water pressure: If the water pressure to your home is set too high, pipes and hoses may fail under the pressure. Buy a water pressure gauge at a local hardware store, attach it to an outside faucet, and turn the faucet to full force. The gauge will give you a reading of the home’s water pressure. Typical residential water systems are designed for water pressure of 40 to 70 psi. If your home’s water pressure exceeds 100 psi, install a pressure regulator (which is available at hardware stores as well.)

Repair broken and cracked windows and doors to prevent frozen pipes.