#1 Rated 24X7 Plumbing Companies Kake 99830 AK (844-507-4350)

Posted by in Plumbing Companies, on November 15, 2017

Plumbing Emergency Firms in Kake Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Kake 99830 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Kake 99830 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Kake 99830 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Kake 99830 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Kake Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Kake 99830 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Kake 99830 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Kake 99830 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Kake 99830 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Unalakleet 99684 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Trapper Creek 99683 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Unalaska 99685 AK (844-507-4350)

Be sure to pour about a gallon of water to drains that you seldom use so as to prevent odors from getting inside your house. Use snakes when dealing with slow drains to ensure that they will function properly in the event of major flooding. Remember drains must be able to efficiently drain water at all times.

Tips for maintaining plumbing during winter: Prevent the clogging of drains- It is very important to keep the drain pipes free from clogging because a clogged drain does not allow water to pass through quickly. If your drain pipe is blocked, you should immediately clean it because the water which does not get drained due to pipe clogging can get accumulated and freeze into a block of ice in winter. This can create a tremendous pressure on the inside of the pipe which can lead to cracks. These cracks can widen and cause the pipe to burst in the future. So it is important to unclog the pipes regularly.

Use a strong magnet to find hidden pipes. When trying to locate a pipe under the floor, attach a rare earth (neodymium) magnet to an electrical fish tape and feed it into drain lines through the cleanout plug. Locate the magnet (and the pipe) under the floor using an ordinary compass, which will turn wildly when it finds the strong magnet.

Striking a match during gas leak: This is the major reason of severe gas leak accidents in the US. In gas leak situation people usually neglect the fact that switching on a light or striking a match can lead to the severe explosion. And this includes all types of electrical appliances that are capable of triggering a spark for an explosion or fire.

Tips for Fixing Low Water Pressure in Your Home: Take a look at the water heater- Low water pressure can occur in hot water pipes if there is a problem with the water heater. There may be clogging due to sediment accumulation in the heater or the water supply line. The pipes supplying water to the heater may be too narrow. There may be small leaks in the hot water tank or valves. All these reasons can cause the water pressure to become low. It is necessary to eliminate these obstructions in order to make the water flow quickly and with a better force.

A leaky toilet can waste enough water to fill an Olympic sized swimming pool in one year. Now just imagine what that is doing to your bill.

Make sure your bath fan is big enough: If the fans aren’t clearing out most of the moisture in your bathrooms after five to 10 minutes, your fans may not be moving enough air. Fans are certified by the volume (cfm, or cubic feet per minute) of air exhausted out of the room. To find the recommended fan capacity for your bathroom, multiply the bathroom square footage by 1.1 (assuming an 8-ft. ceiling; for a 9-ft. ceiling, multiply by 1.5). Check the cfm volume of your fan, usually marked on a label under the grille. Replace it with a larger model if it’s too small for the size of your bathroom.

Look for Broken Hose Bibs and Frozen Pipes. Freezing water is a major cause of home plumbing damage. Many a plumbing repair is necessitated by water that’s expanded into ice, bursting pipes and other home plumbing components. When shifting from liquid to solid state, water swells by 9%. For this reason, homeowners should shut off and drain water systems prior to hard freezes. In the spring, check that all parts of your home plumbing system are still functional. Check faucets, outside spigots, and all parts of your plumbing schema. Beyond functionality, check for leaking pipes and pooling water. Should you discover ice damage, arrange for several quotes from local residential plumbers – doing so will generally win you a lower bid.

A pedestal sump pump works well if you have a smaller diameter basins

Vinegar: Tried and true method: Remove as much liquid as you can. Toss in 1 cup of baking soda, then pour down a cup of household vinegar, plug with the stopper then let sit for half an hour. After about 30 minutes, unplug and pour a kettle full of hot water on top. See this page from thegoodhuman.com and this this one from treehugger.com for more details. This is the method I’ve grown up with and it works even if there’s still liquid backed up (although it works faster without water). Just double the baking soda & vinegar amount, give it about an hour and things have fully emptied, dump more fresh batches of boiling water 2 or 3 times to completely clear out the gunk.

If a sump pump fails, and water gets into the basement, do not attempt repairs without first turning off the power to all basement outlets.

Small bathroom? A corner toilet is a great way to save space!

How to deal with water damage? Start cleaning up immediately- The longer you wait to start the cleaning process, the more damage is caused due to dampness. Things which could have been saved, reach a stage where they become beyond repair. Delay in cleaning up can cause the walls to become soft and weak due to moisture. It can lead to growth of mold which can be very difficult to eradicate. In order to avoid the financial costs of replacing so many damaged items, you should sort out the items and keep them out for drying. The flooring should be wiped clean after mopping of water and all ventilation sources should be opened to facilitate the drying process.

How to deal with water damage? Make use of humidity sensors- You cannot spot the moisture that gets seeped into the walls or the ceiling. There are humidity sensors which can help you to locate these wet spots. Once you know which places are most affected, you can start the drying or damage repair process from there. This saves time and helps in tracking the amount of moisture trapped in such inaccessible places. If even a small amount of dampness is allowed to exist, it can cause rot and mold formation which can gradually eat away at the foundation of your house and make it hollow from within. Humidity sensors help in preventing this.

Flood protection device – An automatic water leak detection device prevents flooding by immediately shutting off both the hot and cold water supply to the washing machine when sensors detect a water leak. These devices are quick and easy to install by homeowners and provide 24/7 protection against damage caused by washing machine floods. Some even sound an audible alarm. Price tag is less than $150.

“Plumber’s putty,” can damage plastic and it can leave stains.

Use food coloring, to test for a leaky toilet. Place a few drops in your toilets water tank. Wait a few hours, then check the bowl to see if there is any color there. If there is, it’s an indicator that you have a leaky flapper

You can use a wet/dry vac to retrieve items that fall into the toilet