#1 Rated 24X7 Plumbing Companies Juneau 99801 AK (844-507-4350)

Posted by in Plumbing Companies, on November 26, 2017

Plumbing Emergency Firms in Juneau Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Juneau 99801 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Juneau 99801 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Juneau 99801 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Juneau 99801 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Juneau Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Juneau 99801 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Juneau 99801 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Juneau 99801 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Juneau 99801 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Sutton 99674 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Takotna 99675 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Talkeetna 99676 AK (844-507-4350)

Tips to Hire a Local Contractor: Ask Friends and Family for Referrals. Your friends and family are sure to be upfront with you about their experience with plumbing companies that they’ve used. If they had a good experience, definitely ask them for an estimate. It’s very important to get your referrals from people that you know and trust.

Clean-outs: You should also find out where the clean-outs are. This is really important.

Look at the faucets for leaks. Examine the knobs and also the faucet itself. Hundreds of gallons water every day can be wasted because of leaks and that’s not good if you’re paying your water bill. By stopping a leak now, it can save you yourself lots of money. Leaks can grow with time as well, so avoid a disaster and view all faucets for leaks!

Save Money on Bathroom Modelling – Do your own demo. Knocking down may not be as costly as rebuilding, but you can still shave dollars by doing some of the demolition yourself—as long as you proceed with care. “If a homeowner wants to demo a deck, well, I am sure they can handle that,” says Michael Winn, owner of Winn Design, in Virginia. “But when it comes to interior spaces, I would dissuade them from doing it unless they have done it before.” The reason: A reckless wrecker might unwittingly take out a load–bearing wall or, worse still, plunge a reciprocating saw into live wiring or pressurized plumbing. (For tips on how to do demo right, see our October 2005 feature, “Before You Construct, You Have to Destruct.”)

Some check valves can be attached to the sump pump itself, while others are placed farther up the outlet pipe

Tips for installing and repairing a gas line: Seal the seams properly if there is a leak in the pipe- In case the gas pipe line that you are using develops leaks; bubbles are visible near the seams. This is very common because there are so many attachments in the pipe which can become loose over time. You need to detach that particular section of the pipe and pour a mixture of water and dish detergent over it. This can act as a sealant and fix the various parts of the gas line together strongly. It is very important to plug leaks because a small leak can cause a big explosion and destruction.

What to look for in your next contractor – like with any other contractor, you should only hire a licensed plumber. Without a license, the plumber’s credentials are unverifiable, and more likely than not, they will show the same level of attention to your job as they did to their business.

Have everything planned and materials in hand before you start. Changing course in midstream always costs time and money. You should know what you’re doing and when you expect to finish before launching into any grand bathroom renovation.

DIY plumbing jobs will need which you learn how to solder copper to the lines to the water supply. You can practice this skill which means you have the ability to run your lines without worrying regarding this leaking. Look online for video tutorials which can help you receive a handle on the way to soldering.

Ways to Prevent Washing Machine Leaks: Tighten the hose connections- Hose connections provide water to the hoses which in turn supplies hot and cold water to the washing machine. The moment the spin cycle starts, a lot of pressure is created because water gets filled up in the machine. Not only the hoses but the connections too have to withstand this pressure. It can so happen that with regular use, these connections may become loose and start leaking. To prevent this, you need to check your hose connections from time to time and tighten them up if they appear to be loose.

Look for Broken Hose Bibs and Frozen Pipes. Freezing water is a major cause of home plumbing damage. Many a plumbing repair is necessitated by water that’s expanded into ice, bursting pipes and other home plumbing components. When shifting from liquid to solid state, water swells by 9%. For this reason, homeowners should shut off and drain water systems prior to hard freezes. In the spring, check that all parts of your home plumbing system are still functional. Check faucets, outside spigots, and all parts of your plumbing schema. Beyond functionality, check for leaking pipes and pooling water. Should you discover ice damage, arrange for several quotes from local residential plumbers – doing so will generally win you a lower bid.

Tips for Choosing the Right Plumber – Timeliness and cleanliness are indicators of professionalism. Your time and your home are important. You should expect the company to treat you with respect by keeping you notified with a time range for when their technician will arrive and the technician should arrive at the time you were told. You should also expect a technician to take all necessary precautions to protect your home. An example of this is wearing shoe covers. A good indicator of cleanliness is the clean, professional appearance of the technician and his tools when he arrives at your home. There is a saying that you can often tell the quality of the work by the tools.

Invest in a Water Softener: All the minerals in hard water make your drinking water taste gross, but it is also detrimental to your plumbing system. Over time, your pipes will develop heavy mineral deposits. Invest in a water softener to protect your pipes and also improve the quality of your water.

If your toilet won’t stop running than the float arm may not be rising high enough. To remedy this you will need to bend the float arm down or away from the tank wall.

Prevent the bursting of pipes as a result of change in the temperature. You need to allow the flow of heat to achieve beneath the sinks and in to the pipes, you must keep your cabinet doors of your bathrooms and kitchens open. It is essential to keep water running at both cold and hot faucets together with vanities that are in close proximity to exterior walls.

Tips for Fixing Low Water Pressure in Your Home: Contact the local water department- If there is no problem with any of your water supply pipelines, you need to check whether the municipal water lines supplying water to your main water pipe are in proper working condition or not. You can contact the water department to call them for an inspection. They can detect problems with the water supply lines and solve them. When the water supply becomes normal, the low water pressure problem gets solved.

If plunging doesn’t fix your clogged toilet, it’s time to contact a professional plumber

Those toilet flushing tabs, are horrible for your toilet and will create major problems down the road