#1 Rated 24X7 Plumbing Companies Hooper Bay 99604 AK (844-507-4350)

Posted by in Plumbing Companies, on November 27, 2017

Plumbing Emergency Firms in Hooper Bay Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Hooper Bay 99604 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Hooper Bay 99604 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Hooper Bay 99604 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Hooper Bay 99604 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Hooper Bay Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Hooper Bay 99604 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Hooper Bay 99604 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Hooper Bay 99604 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Hooper Bay 99604 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Shishmaref 99772 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Selawik 99770 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Shaktoolik 99771 AK (844-507-4350)

Renovate just part of your bathroom. If you can’t afford to tear the entire bathroom down to the studs and rebuild it, consider renovating just the tub and shower area. “It’s going to give them the impact of a new bathroom,” Brugnoni says.

Make a Checklist: To maximize your plumber’s time, it would be best to check all possible troubles in your plumbing. Remembering another plumbing trouble after the plumber leaves can be very costly. You will ask for another price quote and set for another appointment. With everything laid out properly, not only will you be able to save money but time as well.

Ensure that Each Drain Has a Filter. As residential plumbers can vouch, placing filters over each drain in your home prevents clogs and costly plumbing repair.

Stops: You should also check to make certain that the stops under each sink and at the back of toilets could be turned without any problem. This way you can close them if you experience a problem.

Tips to Hire a Local Contractor: Make Sure They Have a License. This is probably the most basic rule for finding a plumber. Always make sure that a plumbing company has the right credentials and carries full insurance to protect you just in case some sort of disaster happens.

Hit the Salvage Hard: Home decor blogger Anita Joyce found a large piece of salvage barn wood to serve as a shower curtain valance. It looks like a pricey piece and serves as a focal point, but it was definitely a budget item. Salvage can be intimidating, but if you start by checking out antique stores, flea markets, resellers and auctions, you’ve already got the idea, she says. You just have to go do it to really figure it out … and that’s how you score the really great items. You can also salvage and redo cast iron tubs, light fixtures, even sinks … basically anything that fits your style and you want to put the effort in to saving and making your own!

Install water detection devices: A water detector is a small electronic device that sounds an alarm when its sensor comes in contact with moisture. Its main benefit is that it detects low moisture levels or slow leaks that often go unnoticed. Install it near water heaters, sump pumps, washing machines, dishwashers and toilets to prevent extensive damage and mold growth.

Save Money on Bathroom Modelling – Consider long–term costs, not just short–term gains. If your addition calls for clapboard siding, for instance, you can save more in the long run by ponying up now for the preprimed and prepainted variety. It costs an extra 10 to 20 cents per foot, but “you’ll wind up paying for half as many paint jobs down the road,” says Paul Eldrenkamp, owner of Byggmeister, a design–build remodeling firm in Newton, Massachusetts. The reason? Factory finishes are applied on dry wood under controlled conditions—no rain, no harsh sun. “I used prefinished claps on my house about ten years ago and the only flaw in the finish is the occasional mildew spot, easily washed off,” Eldrenkamp says. “The paint looks as if it’ll be good for another ten years, easily.” Cost of unfinished siding for a 10–by–40–foot addition, plus two paint jobs: $5,000

Toilets and sinks require different types of plungers to remove clogs. Make sure you’re using the correct one.

Use a five gallon bucket as a tool holder. And if a leak springs mid-project, it’ll catch the water. A tool caddy can also be attached to the bucket providing a place for everything.

Ways to Prevent Washing Machine Leaks: Shut off the faucets after use- After your laundry work is over, you should make it a point to turn off the hot and cold water faucets. If you keep the faucets on, they continue to supply water to the washing machine hoses. The excess water which is not required by the machine gets filled up in the pipes and can cause the hoses to burst. Your laundry can get transformed into a watery mess and the water can seep down to the basement level as well. To prevent such water damage, the simplest trick is to shut the faucets after the spin cycle is over.

You can also add some hot or boiling water to your bowl and try flushing, to correct a clog.

Take a picture before closing up walls. Your walls may not have much inner beauty, but it’s a good idea to take pictures of what’s inside during remodeling. The same goes for floors and ceilings. When your next remodeling or repair project rolls around, you’ll know where the framing and the electrical and plumbing lines are.

Those toilet flushing tabs, are horrible for your toilet and will create major problems down the road

Save Money on Bathroom Modelling – Plan with stock sizes in mind. “Ask yourself, ‘Why am I building something 10 feet wide if plywood comes in 4–foot–wide sheets?'” says Lisa Stacholy, of LKS Architects, in Atlanta. The same applies to stock windows and doors: Use manufacturers’ off–the–shelf dimensions from the outset and you will save the premiums of custom fabrication.

Tips for maintaining plumbing during winter: Do not pour grease down the drain- It is a common tendency to pour the used cooking oil and grease down the sink. People think that it gets drained just like water. However, this is not the case. Oil and grease can clog the drains by sticking to the side of the pipes. These substances get frozen up during winter and make the passage of water difficult. To avoid this problem, you should refrain from pouring down greasy substances in the drain. If you do so by mistake, you should instantly turn on the water supply and keep it on for some time so that the oil gets washed away.

How to deal with water damage? Start cleaning up immediately- The longer you wait to start the cleaning process, the more damage is caused due to dampness. Things which could have been saved, reach a stage where they become beyond repair. Delay in cleaning up can cause the walls to become soft and weak due to moisture. It can lead to growth of mold which can be very difficult to eradicate. In order to avoid the financial costs of replacing so many damaged items, you should sort out the items and keep them out for drying. The flooring should be wiped clean after mopping of water and all ventilation sources should be opened to facilitate the drying process.

Submersible sump pumps are typically quieter than pedestal pumps.