#1 Rated 24X7 Plumbing Companies Goodnews Bay 99589 AK (844-507-4350)

Posted by in Plumbing Companies, on November 9, 2017

Plumbing Emergency Firms in Goodnews Bay Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Goodnews Bay 99589 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Goodnews Bay 99589 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Goodnews Bay 99589 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Goodnews Bay 99589 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Goodnews Bay Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Goodnews Bay 99589 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Goodnews Bay 99589 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Goodnews Bay 99589 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Goodnews Bay 99589 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Houston 99694 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Anchorage 99695 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Whittier 99693 AK (844-507-4350)

Vinegar: Tried and true method: Remove as much liquid as you can. Toss in 1 cup of baking soda, then pour down a cup of household vinegar, plug with the stopper then let sit for half an hour. After about 30 minutes, unplug and pour a kettle full of hot water on top. See this page from thegoodhuman.com and this this one from treehugger.com for more details. This is the method I’ve grown up with and it works even if there’s still liquid backed up (although it works faster without water). Just double the baking soda & vinegar amount, give it about an hour and things have fully emptied, dump more fresh batches of boiling water 2 or 3 times to completely clear out the gunk.

Save Money on Bathroom Modelling – Don’t overspend on wall prep. If your walls are in such rough shape that it would take a painting contractor days of filling and sanding to make them ready for the roller, consider using materials such as Texturglas, from Deerfield Beach, Florida— based company Roos International. A breathable, nontoxic wall covering made of fine glass filaments, Texturglas has a similar look and feel to the fiberglass matting used in auto–body work. It’s available in a variety of surface patterns, takes paint readily, and is designed to be installed right on top of existing surfaces, adding strength while covering up dings.

Clean visible mold immediately: Surface molds grow in just about any damp location, such as the grout lines of a ceramic tile shower. To get rid of mold, scrub with detergent and water and let the surface dry completely. Or use a solution of 10 percent bleach and 90 percent water (a stronger bleach solution will not give better results). Spray or brush on the solution, let it sit 10 minutes, then rinse it off and let dry. A nontoxic mold control product called Concrobium ($10 for 22 oz. at home centers) can be effective if used every few months.

When a metal drain leaks it’s usually a great idea to replace the metal with plastic piping

An assortment of Allen keys is very handy and has many uses.

Baking Soda: Remove as much of the liquid that’s backed up as you can. Toss 1 cup of baking soda into the drain then pour a large pot or kettle of boiling hot water over top. If it empties completely, pour down another kettle to give it another hot flush and then let cool water run from the tap for a couple minutes.

Use a shop vacuum to remove hard objects. When a hard object like a toothbrush, comb or toy plugs a toilet or drain, a plunger may not be the solution—it might only push the obstruction in deeper. Instead, suck out the water and the obstruction with a wet/dry shop vacuum.

Repair broken and cracked windows and doors to prevent frozen pipes.

Tips for Fixing Low Water Pressure in Your Home: Locate the water pressure regulator- Many times a water pressure regulator is attached to the main supply valve. It is a wheel-like structure which can either decrease or increase the supply pressure. You can check whether your main supply valve has a regulator or not. If it is there, you can simply adjust it to increase the pressure of the flow of water to your house. It is better to leave this job to a plumber because the regulator is very tight and needs specific tools in order to make adjustments. The plumber also knows how much pressure your pipes can bear so he can make changes accordingly.

Examine Your Water Meter. Your water meter runs from the outside water main line to a small metered box located on the outside of your home. As it makes its way into your home, another meter controls water flow. Be sure to check this area for leaks. Do you see the meter turning even though water isn’t flowing throughout your home? If so, you may have a water leak somewhere. A Ragsdale technician can come to your home and perform a complete plumbing inspection, which will detect the source of the leak.

Spot the sewer valve. Finally, hunt down the location of the household’s main sewer valve. It’s there to provide access to correct a clogged sewer line; don’t make the Roto-Rooter man spend pricey labor time looking for it when the toilets overflow.

Deaden sounds with expanding foam. Fill the space between two stainless steel sink basins with expanding foam. The foam deadens vibrations and lessens the gong effect. It’s possible to do this with the sink in place but much neater and easier before installation. Either way, let the foam harden and then trim away the excess with a knife.

Most newer water meters have an easy to read leak indicator on the face of the dial

Tips for Fixing Low Water Pressure in Your Home: Take a look at the water heater- Low water pressure can occur in hot water pipes if there is a problem with the water heater. There may be clogging due to sediment accumulation in the heater or the water supply line. The pipes supplying water to the heater may be too narrow. There may be small leaks in the hot water tank or valves. All these reasons can cause the water pressure to become low. It is necessary to eliminate these obstructions in order to make the water flow quickly and with a better force.

Tips on Hiring a Plumber: Choose a plumber who provides a good service at a fair price- You should always get appraisals for your plumbing job from two or three plumbing service providers. This can help you to get an idea as to the general rate in the market for the service that you require. You should choose the plumbing service company which you think is providing the service at a fair price. The company providing the service at the lowest rate is not necessarily the best one. In order to find a quality service provider, you should see which plumber gives you practical advice on the way to solve your problem.

Plastic piping is much easier to install, adjust and tighten if a leak develops, than metal piping