#1 Rated 24X7 Plumbing Companies Girdwood 99587 AK (844-456-4168)

Posted by in Plumbing Companies, on September 26, 2017

Plumbing Emergency Firms in Girdwood Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Girdwood 99587 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Girdwood 99587 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Girdwood 99587 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Girdwood 99587 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Girdwood Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Girdwood 99587 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Girdwood 99587 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Girdwood 99587 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Girdwood 99587 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Anchor Point 99556 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Anvik 99558 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Aniak 99557 AK (844-456-4168)

Deaden sounds with expanding foam. Fill the space between two stainless steel sink basins with expanding foam. The foam deadens vibrations and lessens the gong effect. It’s possible to do this with the sink in place but much neater and easier before installation. Either way, let the foam harden and then trim away the excess with a knife.

Keep our number handy: 1-888-9TIGER1. You never know when you’ll have a plumbing emergency.

Plunging: Use a small plunger to try forcing things to clear. You’ll need a few inches of liquid in the sink to help make a vacuum seal for the plunger and a few forceful plunges to make this work. You can buy a plunger that’s about a 1/3 of the size of a regular toilet plunger. These are only a couple bucks, need very little room and they’re great to keep just in case trouble rears. You can use a full sized one if you can’t find a small one.

A pedestal sump pump has the motor attached to the top of a shaft, this motor is not designed to be under water.

How to deal with water damage? Facilitate the drying process- When there is water damage, it can take a long time to dry up. In order to accelerate this process, you should remove the wall board that is in touch with water. Drywall can absorb a lot of moisture, so it needs to be replaced. Opening the doors and windows and letting in air can quicken the process of drying. All wet items need to be removed, especially wet carpets. Wet-dry vacuum can help in removing the standing water. It can easily suck up the excess water and clear the surface of the flooring. Then the floor can be wiped to remove any leftover moisture content.

Tips for Choosing the Right Plumber – See how transparent the company is about sharing their reviews. In today’s technological world, there are many ways to find out about how a company is rated. A plumbing company that is transparent readily shares reviews on their website and also has good feedback on their social media. In addition, you can check reviews on Yelp and Angie’s List. And don’t forget to see what rating the company has with the Better Business Bureau. Another way a company shows transparency is through their affiliations.

Mirror Frame-Up: Dress up that builder-grade mirror with a fantastic frame, and at a fraction of the price of sourcing a huge hanging mirror. A frame will also hide any age-related wear, says Karen Gray Plaisted, a Warwick, N.Y.-based home stager and decorator. “I often tell clients to add a frame around their mirror to hide the flaking that can happen around the edges, and to give it a more updated look,” she says.

Save Money on Bathroom Modelling – Buy building supplies at auction. Brian Peppel, a homeowner in Phoenixville, Pennsylvania, attends one building–supply auction each month in nearby Lancaster County. His recent finds include two pallets of concrete block for $10 and a solid–wood prehung exterior door for $65. “Their inventory is everything under the sun, a lot of scratch–and–dent, misordered custom items, or new overstock supplies,” reports Peppel. He once watched the auctioneer’s gavel fall on a large, custom–made triangular window with an original retail value that he pegs at several thousand dollars. The winning bid? $1.

In case of serious plumbing problems, it is advised that you get the service of qualified professionals, such as a Dallas plumber or plumbers Atlanta. Doing so will give you the guarantee that all your plumbing concerns will be addressed accordingly.

Save Money on Bathroom Modelling – Skip the foundation. If local code allows, you may be able to support a small addition on posts and beams, as you would a deck, explains contractor Dennis Gavin, of Gavin Design–Build, in Media, Pennsylvania.

Save Money on Bathroom Modelling – Limit recessed light fixtures. The more recessed lights you put in, the more it’s going to cost,” says Tom Silva, This Old House’s general contractor. In addition to the fixtures, there’s the labor to cut all the holes and insulate them properly. A wall– or ceiling–mounted light can also deliver more wattage, which means you may be able to get away with fewer fixtures.

Keep in mind that homeowner’s insurance provides coverage for damage that is sudden and accidental. Damage that results from lack of maintenance is not covered on a standard homeowners insurance policy. If it’s too late and you’re already dealing with a wet disaster, check out advice on how to minimize water damage in your home.

Have an older shower head? You can save up to 7.5 gallons of water per minute by replacing it with a newer model.

Ways in Which You Can Prevent Water Damage: Test your sump pump- Sump pumps help in pumping out the water that gets accumulated in the sump basin. These pumps are mostly found in the basements of houses. Sump pumps come in handy during torrential rain or thunderstorms. They get turned on automatically when the sump basin gets filled with water. However, these pumps can become defunct if they are not used for a long time. You need to test whether your sump pump is in proper working condition or not. It is better to keep a spare one as backup so that your house does not get flooded during storms.

Lower the thermostat on your water heater; water heaters sometimes come from the factory with high temperature settings

It is a wise idea to install flood alarms, which is a device that will alert you in case it comes in contact with water. This device is made to notify you of an impending flooding or serious leak problems.

Ways to Unclog Drains: Baking soda and salt can also help- Instead of vinegar; you can combine salt with baking soda and drop the mixture into the drain. You need to leave it there for half an hour so that it sticks to the sides of the drain. After that you can pour hot water in the drain pipe so that the chemical reaction can destroy the sticky and greasy waste and push it down the drain to get flushed out of the pipe. It is a good combination to remove the biggest blockages in the drain pipes.

Know your water main: Know the location of your water main, and shut it off if you leave for an extended amount of time. If no water goes in to the house, chances are no faucet drips can wreak havoc on your home while you’re away.