#1 Rated 24X7 Plumbing Companies Gambell 99742 AK (844-507-4350)

Posted by in Plumbing Companies, on February 22, 2018

Plumbing Emergency Firms in Gambell Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Gambell 99742 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Gambell 99742 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Gambell 99742 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Gambell 99742 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Gambell Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Gambell 99742 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Gambell 99742 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Gambell 99742 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Gambell 99742 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Kwethluk 99621 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Kotlik 99620 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Kwigillingok 99622 AK (844-507-4350)

Do not use galvanized straps on copper pipes.

Recent announcements of increases in energy prices also mean it’s worthwhile getting your heating system checked out to ensure it operates at maximum efficiency. Old systems, or systems which are not running as well as they could be, are likely to be costing you more than necessary, so a check up can be hugely cost-effective over the long-term.

A clog can often be yanked out with an easy tool like a Zip-It or other flexible-shaft pick-up tool

If a supply tube break off is causing a leak, screw in a blind cap to seal off the leak until it can be fixed.

Ways in Which You Can Prevent Water Damage: Repair frozen pipes- The outdoor water taps tend to freeze up during winter months when the temperature is very low. The water in these pipes gets converted into ice which can put immense pressure on the sides of the pipes. In extreme cases, the pipes can burst and cause flooding. It is important to thaw frozen pipes to avoid such a scenario. To prevent pipes from freezing, you can drain the outdoor faucets so that there is no residual water. You can also shut-off the valve that supplies water to these pipes. This can save you from pipe repairing or replacement expense.

The first thing you should do is check the main water valve where the water line enters the home. In most cases, the valve looks like a wagon wheel and it is located at the water meter going into the home. Turn the water valve a half-turn in a clockwise direction so it slightly closes off. Then, turn the valve counter clockwise all the way so that it is completely open. There should be a forceful thrust of water that pushes any deposit through the system and raises the pressure. If you think there is sediment built up in your pipes, open your sink faucet, and then turn the water on and off at the main water valve which loosen mineral deposits and push the mineral deposits through the plumbing system.

Tips for Fixing Low Water Pressure in Your Home: Check individual faucets- If one of your faucets is not providing adequate flow of water, you need to check whether the problem is just with that faucet or with all the faucets. In case only one faucet turns out to be faulty, you can check what is restricting its flow. The aerator may be clogged, the stop valve may be partially closed or the washer may be dislodged. Once you identify the fault, you clean it out or remove it. You can also check the supply valves which are present below the faucets to see whether the valve is completely open or not. This can solve the problem.

What to look for in your next contractor – Call the company and take note of who answers the phone. A reliable plumber will be easy to get ahold of and will have a secretary answering a phone for him if he is unable to answer his cell phone.

Tips for maintaining your bathroom plumbing: Pay attention to what you throw into the drains- People find it very easy to throw things into the toilets and drains because they think that everything gets flushed. However, many times, things get stuck in the drains because of such activities. You should not throw anything other than toilet paper into the toilet and the drains in the sinks should not be used to dispose unbreakable or insoluble stuff. You should not even throw chemicals into the drains because they are reactive and can corrode the pipes. It is necessary to follow these steps to save the effort of unclogging drains later.

Investigate leaks right away and fix promptly: If you opt to ignore moisture damage or postpone making the necessary repairs, be prepared to experience mold, mildew, dry rot, or even structural damage to your home.

How to deal with water damage? Disconnect the power supply- Water and electricity is a lethal combination which can be life-threatening. When your house is flooded with water, you should turn off the power supply to the rooms which are affected before starting the cleaning process. It is a precaution which must be taken without fail because you need to remove electric appliances and gadgets and deal with loose wires. In case the electricity supply is not switched off, you can get an electric shock. In extreme cases it can lead to death. So you should be careful.

Tips for maintaining plumbing during winter: Maintain adequate temperature in your house- The attics and basements are the most vulnerable areas of the house because there is no heat source in these rooms. However, all the main pipes are located in these places. It is important to shut off all sources of cold air to these rooms. The doors and windows need to be properly sealed to prevent freezing of pipes. The thermostat should be kept at more than 55 degrees all the time so that the temperature remains warm enough for the pipes to function normally.

Check the hoses: Locate the hoses that feed and drain the water from your machine. If you find water where they are connected, check the clamps to make sure they are tight. If the clamps are secure, check the outlet pipe to make sure there aren’t any kinks are preventing the water from flowing. If you find any leaks in the hose, you’ll have to replace them.

If you live in areas where sewers tend to back up sometimes, then you should consider installing a backflow valve on your floor drain. This functional yet seemingly simple device is designed to inhibit backups to your floor drain.

Save Money on Bathroom Modelling – Don’t move the kitchen sink. Or the toilet, if you can avoid it. “That often becomes the biggest part of the plumbing–price increase,” says Richard Trethewey, This Old House plumbing and heating expert. If your new layout requires that you move the toilet, use the opportunity to upgrade the pipes at the same time. “That will save you money in the long run,” says Richard.

The newer, thicker chemicals meant to remove clogs from drains will often cause or worsen clogs.

Salt and Baking Soda: Mix 1/2 cup of table salt with 1/2 cup of baking soda and pour down the blocked drain. Leave it for 10-20 minutes, then pour boiling water down. The salt, baking soda, and boiling water will produce a chemical reaction that should dissolve some of the nastiest blockages. (See also: 27 Uses for Baking Soda)

Do not assume that having a large horsepower sump pump will be the best choice for you, do your research before buying

Water Trickling Into the Tank: If you hear a sustained hissing sound coming from your toilet, it’s probably a result of water trickling into the tank via the supply line. In this case the parts to check are the float, the refill tube and the ballcock or inlet-valve assembly. The hissing sound is typically caused by water coming through the inlet valve. First check to see whether the float is sticking or needs adjusting. Next, check to make sure the refill tube isn’t inserted too far into the overflow tube. (It should extend only about 1/4″ below the rim of the overflow tube.) If neither of these adjustments solves the problem, you’ll probably need to replace the ballcock assembly as described above.

Tips for installing and repairing a gas line: Always test the pipe before using it- Whenever you carry out a repair or replacement work on your gas lines, you should check the pipe for leaks before starting regular use of the gas line. For this purpose, you need to switch on the gas burner for some time and see whether gas is leaking or not. If there is a leak, you can get a distinct smell and hear a hissing sound coming from the pipe line. You need to turn off the gas immediately and seal the leaks. You should repeat this checking process till you are completely satisfied that there are no leaks.