#1 Rated 24X7 Plumbing Companies Fort Yukon 99740 AK (844-507-4350)

Posted by in Plumbing Companies, on November 18, 2017

Plumbing Emergency Firms in Fort Yukon Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Fort Yukon 99740 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Fort Yukon 99740 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Fort Yukon 99740 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Fort Yukon 99740 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Fort Yukon Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Fort Yukon 99740 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Fort Yukon 99740 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Fort Yukon 99740 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Fort Yukon 99740 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Mountain Village 99632 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Naknek 99633 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Moose Pass 99631 AK (844-507-4350)

Resolve Issues Early: It might seem easy enough to think that the little leak in your bathroom faucet can wait until later to get fixed. However, you will be thankful that you took care of the situation early on before it got bigger and more expensive.

A water heater setting of 115°F provides enough hot water for most users

Tips for maintaining your bathroom plumbing: Change the pipes which are very old- Pipes that have been around for a long time are vulnerable to cracks and leaks. If the pipes in your home are old, you should seriously think about getting them replaced because sooner or later they will develop leaks which will cause a lot of water damage. Instead of spending on pipe repairs or water damage repairs in the future, it is better to spend on a new plumbing system now. You do not have to think about plumbing problems for a long time if you get the old pipes replaced.

Prevention and Maintenance: Take note of possible build up of grease, hair or any material that can clog your drain. Remember that grease solidifies when it cools which could certainly occur inside your plumbing. The best that you can do is gather excess grease in a different container then dispose it when it solidifies. Though simple as they may seem, preventive measures can save you from further expenses and worries. Another option is to apply for a maintenance contract with a reputable plumbing company. If your plumbing system is regularly checked, you will surely be at peace of not having any major plumbing troubles in the future. A small amount of money spent now can save you a huge deal of money later on.

If you think your plumbing or heating equipment is due for any work it is always advisable to get it done in the summer before you need it as you don’t want to be left in the cold with a higher bill for emergency work.

Be Aware of Little Problems: It is often the smallest problems that can mean the most trouble later on. Make sure you are aware of any little leaks or dripping faucets so that they don’t have the chance to get bigger.

Ways to Prevent Washing Machine Leaks: Keep a water sensor- You can install a water sensor on your laundry floor and place its control unit on the wall. This device is very useful in sensing the presence of excess water on the floor and it gives an indication in the form of an alarm. It can come in handy when your washing machine starts leaking and the water starts accumulating. Some of the floor sensors come with advanced technology which can activate the shut-off valves of the water supply hose whenever there is a leak. This can prevent the leak from gushing forth water into the laundry room and causing water damage.

When a metal drain leaks it’s usually a great idea to replace the metal with plastic piping

Slip joint pliers can be used to loosen the collar nuts on a drain line.

Baking Soda: Remove as much of the liquid that’s backed up as you can. Toss 1 cup of baking soda into the drain then pour a large pot or kettle of boiling hot water over top. If it empties completely, pour down another kettle to give it another hot flush and then let cool water run from the tap for a couple minutes.

How to deal with water damage? Remove the visible mold- It does not take long for mold to grow in damp conditions. It usually grows in the grout lines of bathroom tiles. If you do not eradicate the mold immediately, it can spread to other areas and make your job harder. An easy way to attack and remove mold is to scrub the mold affected area with detergent and water and let it dry. Now you can concentrate completely on the drying process.

Ways to choose your plumber – Pricing – The plumber will know what he or she needs to do and will be able to give an accurate estimate, barring of course, any other major problems. Make sure to get at least three estimates, and be wary of any estimate that is much lower than the others. It could mean the plumber is cutting corners or plans to use inferior parts.

Maintain trees and vegetation: Thriving shrubs can be a beautiful thing — except when their roots wrap around your pipes and break them. That’s why it’s important to minimize landscaping near utility pipes or, if necessary, remove trees and shrubs that have become too big.

Know what a bathroom remodel costs. Before you begin any project, it’s important to put your expectations into perspective when it comes to how much money you’re willing to invest. The size of your bathroom, the quality of materials you want to include and whether you’re planning to do some of the labor yourself all can affect the cost of a remodel. Here’s a look at estimated costs for a basic, mid- to upper-range and deluxe bathroom remodel.

Tips for maintaining your bathroom plumbing: Know the location of the main water valve- You should be aware of the location of the main valve of the water supply to your home. The reason is that if a big leak suddenly causes your house to get flooded with water, you should be able to stop the water supply at once so as to minimize the water damage and halt the wastage of water. The main valve is usually located outside the house beside the water meter. You should turn it off as soon as possible during an emergency.

Tips for maintaining your bathroom plumbing: Drain your water heater regularly- Water heaters tend to accumulate sediment with regular usage because of the heavy minerals that come in with the water supply. It is important to drain the water heaters from time to time in order to remove the layer of sediment blocking the water output pipe. This can help in maintaining the effectiveness of the water heater and you can get a strong and constant flow of hot water on a daily basis.

Get Referrals and Do Your Own Search: Now we go to finding someone who can help you with your plumbing trouble. If you have friends and families around your area, ask for referrals. Most common than not, they too have their share of some plumbing troubles. If however you are not comfortable with this act, ask Google! You will surely end up with a short list of reputable plumbing companies.

Count on Countertops: If your vanity is the main focal point of your bathroom, then choosing granite might not be such a splurge. Karen Gray Plaisted, a Warwick, N.Y.-based home stager and decorator says she worked with a couple who did minor updates to the rest of their bathroom, but they chose a slab granite vanity as the focal point for the space. “It gave it a ‘wow’ and saved a lot of money,” she says.

Tips on Hiring a Plumber: You should ask for references- If you are planning a remodelling project for your home for which you require the help of a professional plumber, then you should definitely ask him to provide examples of his past work. This can give you an idea whether you are hiring the right person for the remodelling job or not. If the plumber is hesitant to supply examples, it means that he is not sure about the standard of his work. You should be able to trust the plumber because you are planning to give a big responsibility to him. Only if the references and examples are satisfactory, you should hire his services.

Don’t Toss Money Down the Toilet — Update It. Here’s some potty talk you won’t want to miss: When remodeling your bathroom, consider replacing your toilet seat and lid instead of tossing out the whole porcelain perch. Just changing out these two tops can give your toilet a fresh look without buying a new unit, which saves you plumber installation fees, too.

Don’t delay cleanup: The longer things stay wet, the more likely you’ll have permanent damage. Delay can also lead to mold problems inside walls, which can cost thousands to eradicate. So before you run off to buy plumbing parts, clean up the mess. Pronto.

To maintain a sump pump, periodically check the system.

Repair problems early. A leaking faucet isn’t just annoying; the moisture it releases puts wear on sink fixtures and can encourage the growth of mold and mildew. Stay on top of problems to keep the household clean and dry.

Cheap fixtures: As the name suggests, cheap fixtures are cheap. The problem is that cheap fixtures don’t last as long. Plumbers as well as the plumbing products cost a good deal of money. Therefore, it’s not a good idea to invest in low quality fixtures. So, if you have been going to work on some DIY home plumbing projects, we suggest that you use the tips given in this article. This way you can rest assured that everything will be fine and you won’t end up creating more problems. For difficult jobs, we always suggest that you hire a good plumber.