#1 Rated 24X7 Plumbing Companies Fort Richardson 99505 AK (844-507-4350)

Posted by in Plumbing Companies, on December 28, 2017

Plumbing Emergency Firms in Fort Richardson Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Fort Richardson 99505 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Fort Richardson 99505 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Fort Richardson 99505 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Fort Richardson 99505 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Fort Richardson Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Fort Richardson 99505 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Fort Richardson 99505 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Fort Richardson 99505 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Fort Richardson 99505 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Talkeetna 99676 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Tatitlek 99677 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Togiak 99678 AK (844-507-4350)

Know Where the Shutoff Valves Are: When you do experience problems, like an overflowing toilet or a pipe that has exploded, you need to shut off the water immediately to prevent further damage. Know where the shutoff valves are so you can prevent the problem from getting worse.

To determine the size of sump pump you need, you must know how much water you’ll need to be pumped, how high the water will be pumped and the length and size of pipe.

Use a strong magnet to find hidden pipes. When trying to locate a pipe under the floor, attach a rare earth (neodymium) magnet to an electrical fish tape and feed it into drain lines through the cleanout plug. Locate the magnet (and the pipe) under the floor using an ordinary compass, which will turn wildly when it finds the strong magnet.

Replace Outdated Faucets. Is it time to replace an outdated kitchen or bathroom faucet? Your faucets do more than enhance the appearance of your sink. They also adjust the amount of water passing through. Over time, this can cause an increase in your water bill. Newer eco-friendly designs help control how much water is being used and reduce water flow by up to 30 percent or more. Just choose products with the WaterSense label backed by the EPA. Ask a Ragsdale plumber about installing new faucets in your home.

How to deal with water damage? Facilitate the drying process- When there is water damage, it can take a long time to dry up. In order to accelerate this process, you should remove the wall board that is in touch with water. Drywall can absorb a lot of moisture, so it needs to be replaced. Opening the doors and windows and letting in air can quicken the process of drying. All wet items need to be removed, especially wet carpets. Wet-dry vacuum can help in removing the standing water. It can easily suck up the excess water and clear the surface of the flooring. Then the floor can be wiped to remove any leftover moisture content.

Ways to Prevent Washing Machine Leaks: Shut off the faucets after use- After your laundry work is over, you should make it a point to turn off the hot and cold water faucets. If you keep the faucets on, they continue to supply water to the washing machine hoses. The excess water which is not required by the machine gets filled up in the pipes and can cause the hoses to burst. Your laundry can get transformed into a watery mess and the water can seep down to the basement level as well. To prevent such water damage, the simplest trick is to shut the faucets after the spin cycle is over.

A pedestal sump pump has the motor attached to the top of a shaft, this motor is not designed to be under water.

Keep a forced cup and a regular plunger handy. Each plunger has its own specific use and provides extra unclogging power.

Plastic piping is superior than metal piping in almost every way

Double check your tile size. Surprisingly, that 12-inch by 24-inch tile you bought might not be exactly what it claims to be. That’s because most tile is sold in European sizes (millimeters), and the quoted size might also factor in a grout joint, putting your fancy new tile at 11?, which can affect your tile layout, niches and plumbing.

Ways to Unclog Drains: Pour boiling water down the drain- This is a quick fix for the problem of clogged drains. Be it bathroom drains or kitchen sink drains, you can pour a significant quantity of boiling water into the drain pipe. This process should be repeated twice or thrice at small intervals. The boiling water can help to dissolve the settled grime along the sides of the drain pipe and break it into small parts so that the waste can flow down with the water and get drained, leaving the pipe clean.

Tips on Hiring a Plumber: Check whether your plumber is licensed- The plumber’s license is the validation of his experience and skill. In most places, it has become mandatory for plumbers to hold government issued licenses. To get the license, a plumber needs to pass testing and background checks. Whenever you require the services of a plumber, you should always check whether he is licensed or not. It is very important to choose a reputable and qualified plumber to get your plumbing work done in an efficient manner.

High-efficiency toilets are available in a wide range of models

Examine your faucets for leaks. Look into the knobs as well as the faucet itself. Numerous gallons of water each day can be wasted due to leaks and that’s not good if you’re paying your water bill. By stopping a leak now, you can save yourself lots of money. Leaks can grow with time too, so avoid a disaster and look all faucets for leaks!

Be Aware of Little Problems: It is often the smallest problems that can mean the most trouble later on. Make sure you are aware of any little leaks or dripping faucets so that they don’t have the chance to get bigger.

To clean your dishwasher, pour ½ cup of white vinegar into the detergent cup and simply run the empty machine for one full cycle.

It’s a myth that low flow toilets don’t perform as well as regular flow toilets

Consider leaving those vintage finishes. The point of your bathroom remodel might be a fresh, new look, but some things are easier to replace than others. For example, in older homes, wall tiles may have several coats of concrete and maybe wire lath. The difficulty in removing these can cause labor costs to skyrocket. Instead, you might want to keep the vintage tiles and spend your time and money elsewhere. And vintage finishes such as tile can be a cool feature as well.

Clean the filters: Sometimes your machine will have problems filling or leaking from the back. Check the inlet filters to make sure they are clean. Clogged filters can prevent proper water flow.

Single-lever shutoff valve – If you are a conscientious launder like my mother and can remember to turn the water off after each load of wash, replace your dual faucets with a single-lever faucet that lets you controls both hot and cold water at the same time. A low cost solution that’s easy to use! Pick one up at any hardware store for about $25.

Act quickly to stop a leak: A gushing plumbing leak can dump several gallons per minute into your home. You have to act fast to stop the stream. Shutting off the main water valve is an obvious move. But there may still be a few gallons of water held in pipes above the leak. Turn on the lowest faucet in the house, which will let the water harmlessly drain out of the faucet instead of through the leaking pipe.

You can also add some hot or boiling water to your bowl and try flushing, to correct a clog.

Clean gutters and downspouts: Clean your gutters at least twice a year to avoid blockage and ice dams. Standing water can cause damage to your gutters and roof, and unmanaged overflow may create puddles that could damage your foundation. Don’t forget to clean downspouts to ensure water can flow through, and secure downspouts so that they point away from the home.

Ways to Prevent Washing Machine Leaks: Take a look at the door seals- It is not always the water hose in the washing machine which can cause leaking. If the rubber gaskets around the doors of front-loading machines are dirty, mold can start developing and can cause cracks in the seal. Small cracks can stretch into big ones within a short time and cause water to leak from the door of the machine. You should check the door seal for the presence of mold or mildew and should eradicate it immediately if you spot this problem.