#1 Rated 24X7 Plumbing Companies Flat 99584 AK (844-507-4350)

Posted by in Plumbing Companies, on November 21, 2017

Plumbing Emergency Firms in Flat Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Flat 99584 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Flat 99584 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Flat 99584 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Flat 99584 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Flat Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Flat 99584 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Flat 99584 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Flat 99584 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Flat 99584 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Valdez 99686 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Unalaska 99685 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Unalakleet 99684 AK (844-507-4350)

Check the aerator in the faucets to see if they need to be cleaned. Remove the aerator using pliers or a crescent wrench. You will find a small screen inside of the faucet head. Remove the screen and thoroughly rinse it. Before replacing the screen, turn on the water to see if the water is flowing properly.

Invest in a Water Softener: All the minerals in hard water make your drinking water taste gross, but it is also detrimental to your plumbing system. Over time, your pipes will develop heavy mineral deposits. Invest in a water softener to protect your pipes and also improve the quality of your water.

Take a picture before closing up walls. Your walls may not have much inner beauty, but it’s a good idea to take pictures of what’s inside during remodeling. The same goes for floors and ceilings. When your next remodeling or repair project rolls around, you’ll know where the framing and the electrical and plumbing lines are.

Remove hoses: You should remove the hoses from the faucets, and you should do this before the faucets freeze in the cold season.

Have a Plan Before You Start: Working with a designer or architect may seem like a pricey move right out of the gate for someone wanting to remodel their bathroom on a budget, but it is money well spent. Having a plan you’ve worked out with a professional will assure you that your design, budget and timeline are realistic, and it will give you a goal with a path to get there. “Hiring a designer saves you time and money in the long run, so you don’t make expensive errors,” says south Florida-based designer Meredith Marlow.

Tips for maintaining your bathroom plumbing: Pay attention to what you throw into the drains- People find it very easy to throw things into the toilets and drains because they think that everything gets flushed. However, many times, things get stuck in the drains because of such activities. You should not throw anything other than toilet paper into the toilet and the drains in the sinks should not be used to dispose unbreakable or insoluble stuff. You should not even throw chemicals into the drains because they are reactive and can corrode the pipes. It is necessary to follow these steps to save the effort of unclogging drains later.

Bathroom Design Tips: Tub with a Door – It would be much easier and safer to access than a conventional tub. Unfortunately, what people fail to realize is that with most walk-in tubs, you have to maneuver very carefully through a narrow door and then get out of the way as the door swings shut. And you still have to climb over a low step. So if you’re walking or flexibility is compromised, this unit won’t be effective.

Tips on Hiring a Plumber: Your plumber should be insured- Plumbers need to be covered by insurance. This is important for consumer protection. If something goes wrong during the plumbing repair service or an accident takes place, the consumer needs to be compensated for the losses. This is only possible if the plumber is insured. The cost of water damage repair is huge so you need insurance coverage. When you book a plumbing service, you should always check if the plumber is insured. This way you can get financial compensation for any damage caused by the plumber.

Determine the appropriate fuel type for your water heater. If you are considering electricity, check with your local utility company for off-peak electricity rates for water heating.

Learn How to Do It Yourself: You shouldn’t attempt to solve all plumbing problems on your own, but there are some things that you should be prepared to do yourself. Knowing how to use a sewer snake, and learning the fine art of unclogging a drain are two cheap plumbing maintenance tips that will save you money in repairs.

Save Money on Bathroom Modelling – Tap your contractor’s sources. When it comes to things like flooring, ask your subcontractor if he has odds–and–ends stock left over from other jobs. While renovating a Civil War–era bed-and-breakfast in New Jersey some years back, contractor Bill Asdal needed wood flooring. He made a few phone calls and came up with hundreds of square feet of hardwood, in various lengths and widths, that otherwise would have gone into the trash on other job sites. Just by planing it to uniform thickness, then sanding and refinishing it, he saved his client almost $9,000 in materials costs.

Listen for unusual noises when your sump pump is running, strange sounds are signs something is seriously wrong

Have more than one way of drying out your bathroom. Reducing mold and mildew begins with removing moisture. To do that it’s best to have a multifaceted approach: a great fan that vents to the outside (not into an attic) and an operable window.

If you live in areas where sewers tend to back up sometimes, then you should consider installing a backflow valve on your floor drain. This functional yet seemingly simple device is designed to inhibit backups to your floor drain.

Tips for Fixing Low Water Pressure in Your Home: Check individual faucets- If one of your faucets is not providing adequate flow of water, you need to check whether the problem is just with that faucet or with all the faucets. In case only one faucet turns out to be faulty, you can check what is restricting its flow. The aerator may be clogged, the stop valve may be partially closed or the washer may be dislodged. Once you identify the fault, you clean it out or remove it. You can also check the supply valves which are present below the faucets to see whether the valve is completely open or not. This can solve the problem.

Use a five gallon bucket as a tool holder. And if a leak springs mid-project, it’ll catch the water. A tool caddy can also be attached to the bucket providing a place for everything.