#1 Rated 24X7 Plumbing Companies Fairbanks 99790 AK (844-507-4350)

Posted by in Plumbing Companies, on November 12, 2017

Plumbing Emergency Firms in Fairbanks Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Fairbanks 99790 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Fairbanks 99790 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Fairbanks 99790 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Fairbanks 99790 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Fairbanks Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Fairbanks 99790 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Fairbanks 99790 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Fairbanks 99790 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Fairbanks 99790 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies North Pole 99705 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Fairbanks 99706 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Clear 99704 AK (844-507-4350)

A pedestal sump pump has the motor attached to the top of a shaft, this motor is not designed to be under water.

Replacement: Your plumbing at home surely eats a little share of your salary. If you have noticed any part of your plumbing that has been asking for regular repairs, then it is high time that you consider replacing it. Invest wisely. It’s way better to spend money and have a well functioning fixture than paying recurring fees for repairs. You check your faucets, showerheads, water-heater and taps. If you have applied for a maintenance contract, then don’t hesitate to ask the plumber any possible replacement needed.

Ways to Unclog Drains: Attack the clog with the help of caustic soda- You can buy caustic soda from any local hardware store and use it to unclog the drain. 3 cups of caustic soda need to be added a bucket of cold water. This addition of the soda will immediately cause a chemical reaction which will heat up the water and cause fizz formation. You need to be careful while dealing with caustic soda because it can burn the skin instantly. You should wear gloves and then pour the mixture down the drain. It takes around half an hour for the mixture to show its effect. After that, you can pour hot water down the drain to flush the dirt.

Recent announcements of increases in energy prices also mean it’s worthwhile getting your heating system checked out to ensure it operates at maximum efficiency. Old systems, or systems which are not running as well as they could be, are likely to be costing you more than necessary, so a check up can be hugely cost-effective over the long-term.

Clean the filters: Sometimes your machine will have problems filling or leaking from the back. Check the inlet filters to make sure they are clean. Clogged filters can prevent proper water flow.

If your toilet is making noise it can be due to restricted water flow or a defective ball cock assembly. This can be addressed by replacing the entire ball cock assembly or oiling the trip lever. Prior to doing this please make sure to adjust the shut off valve first. Additionally be sure to turn off the water at the fixture shut off valve followed by flushing the toilet to an empty tank. Sponge up any remaining water.

Egg shells are a great way to clean garbage disposals

Tips to Hire a Local Contractor: Ask Friends and Family for Referrals. Your friends and family are sure to be upfront with you about their experience with plumbing companies that they’ve used. If they had a good experience, definitely ask them for an estimate. It’s very important to get your referrals from people that you know and trust.

It is a wise idea to install flood alarms, which is a device that will alert you in case it comes in contact with water. This device is made to notify you of an impending flooding or serious leak problems.

Plunge water first before removing the trap. Before you remove a sink trap, give the drain a few plunges with a toilet plunger. This will push most of the water out of the trap, lessening the mess when you pull the trap. If you have a double sink, be sure to plug the other drain to contain the air pressure. If the strainer isn’t a screw-down style, you’ll have to hold it down while you plunge the drain.

Water Trickling Into the Bowl, or “Phantom Flushes: You may periodically hear your toilet begin to spontaneously refill, as though someone had flushed it. A toilet that cuts on and off by itself, or runs intermittently, has a problem that plumbers call a phantom flush. The cause is a very slow leak from the tank into the bowl. This problem is almost certainly caused by a bad flapper or flapper seat. The solution is to drain the tank and bowl, check and clean the flapper seat, and replace the flapper if it’s worn or damaged.

If you call a plumber right when you first notice a leaky faucet you’ll likely only need a simple, small repair, but if you wait a few months, the leak will worsen and cause more damages leading to more costly repairs.

Just before the cold season hits, check out the condition of your gutters around the roof of your house. Remove all debris, leaves and branches to help you have a smooth flow of water as well as simple drainage. Caretaking beforehand will assist you to prevent serious problems with plumbing in the future.

Plastic piping, unlike metal, won’t corrode.

Toilets and sinks require different types of plungers to remove clogs. Make sure you’re using the correct one.

Ways in Which You Can Prevent Water Damage: Select a safe spot for planting- There are some plants and trees which have invasive root systems which can spread underground and slowly eat away at the drainage system. They can damage your main water supply pipe. If this happens, the force of the water supply through your faucets can start diminishing. The loss of water can make the soil in the yard damp. The roots of the plants can also spread to the foundation of your house and compromise it. To avoid this, you should select safe spots which are at a distance from your house for planting such trees. You can also choose other plants which do not cause damage.

Deaden sounds with expanding foam. Fill the space between two stainless steel sink basins with expanding foam. The foam deadens vibrations and lessens the gong effect. It’s possible to do this with the sink in place but much neater and easier before installation. Either way, let the foam harden and then trim away the excess with a knife.

For safety as well as energy-efficiency reasons, when buying gas- and oil-fired water heaters, look for units with sealed combustion or power venting to avoid back-drafting of combustion gases into the home.

Many toilets really do run only at night; that’s because people use much less water during these hours and in many municipal water systems, the water pressure rises considerably during this time.

Check the seal: The build up of soap can prevent a proper seal. Wipe the door seal carefully. Check to see if there are any areas where the seal is loose, torn or cracked and replace if necessary.

Tips for Fixing Low Water Pressure in Your Home: Check the water softening system- Many people install a water conditioning system in their homes to get potable water which can be used for daily activities. However, sometimes the water softening system can cause the water pressure to slow down. You should try out the bypass option given in the system to check whether the water supply increases or not. If it does improve, then there is some issue with the softner. You should call a plumber to check the issue with the conditioning system and get it fixed or discard the old system.

Saving money over your life: Your gas line repair and maintenance should only be handled by a professional gas line repair in Mansfield, TX. Never opt for an unlicensed plumber. A saving of a small amount of money, by trusting a non-professional plumber, can cost you a fortune, or even your life, due to mishandled or improperly installed gas lines and appliances.

Alternatives to Tile: The bath doesn’t have to have tile to the ceiling: consider alternatives like reclaimed wood panels, board and batten, or beadboard as high-end looking tile replacements. Wood requires more maintenance, but also gives off a much warmer, comforting vibe than tile.

Tips for installing and repairing a gas line: Always test the pipe before using it- Whenever you carry out a repair or replacement work on your gas lines, you should check the pipe for leaks before starting regular use of the gas line. For this purpose, you need to switch on the gas burner for some time and see whether gas is leaking or not. If there is a leak, you can get a distinct smell and hear a hissing sound coming from the pipe line. You need to turn off the gas immediately and seal the leaks. You should repeat this checking process till you are completely satisfied that there are no leaks.

Poking & Taking Apart: Remove the trap or clean-out plug underneath the sink to try clearing the blockage. Use a plumber’s snake or a wire coat hanger to poke down and break apart the mass. You’ll need an empty bucket on hand to catch all the liquid as well as eye goggles firmly in place.