#1 Rated 24X7 Plumbing Companies Fairbanks 99775 AK (844-456-4168)

Posted by in Plumbing Companies, on October 15, 2017

Plumbing Emergency Firms in Fairbanks Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Fairbanks 99775 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Fairbanks 99775 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Fairbanks 99775 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Fairbanks 99775 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Fairbanks Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Fairbanks 99775 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Fairbanks 99775 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Fairbanks 99775 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Fairbanks 99775 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Anchorage 99507 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Anchorage 99509 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Anchorage 99508 AK (844-456-4168)

During cold spells make sure to keep your faucets trickling. This will prevent the pipes from freezing over.

Ways to choose your plumber – Licensure – Most states require plumbers to hold a license, though a couple of states like New York and Kansas do not. If your state does not require licensing, check to see if there have been any formal complaints filed against the plumber you are considering.

A large horsepower sump pump, in a small diameter basin will cause the pump to cycle more frequently, shortening your pumps life.

Insulate exterior walls to prevent frozen pipes.

Check your pressure regulator because sometimes this can cause low water pressure. The pressure regulator is the device shaped like a bell with a screw at the end. You can normally find the pressure regulator either under the home or below the frontal connection. Often you just have to adjust the screw to restore pressure. Tighten the screw to boost the pressure. Make sure you set it between 45 – 60 psi.

Keep our number handy: 1-888-9TIGER1. You never know when you’ll have a plumbing emergency.

Check the hoses: Locate the hoses that feed and drain the water from your machine. If you find water where they are connected, check the clamps to make sure they are tight. If the clamps are secure, check the outlet pipe to make sure there aren’t any kinks are preventing the water from flowing. If you find any leaks in the hose, you’ll have to replace them.

Submersible sump pumps are designed to sit in the base of the sump basin, below water level.

Keep Plumbing Where It Is: Another reason to work with a designer on your bathroom renovation: Using the existing piping will save you big bucks. Relocating utilities like the toilet and the bathtub are no small task: Designer Justin Riordan says it costs about $5,000 each time you move plumbing fixtures.

Small bathroom? A corner toilet is a great way to save space!

Wrap uninsulated pipes with newspaper or form. This another proactive measure for battling frozen pipes.

Tips for maintaining your bathroom plumbing: Do not make use of commercial drain cleaners- We all make use of drain cleaners to unclog drains all the time. This is because the cleaners are easily available and are very convenient to use. However, the commercial drain cleaners that we buy from the market are full of chemicals. When these cleaners are poured down the drain, they do clear the pipe of the clog but the chemical reaction that takes place inside the pipe causes the sides of the pipe to get damaged over time. The drain cleaners are acidic and the pipes are made of metals. These two things are totally incompatible. You should use alternate methods to clean drain pipes to avoid replacement expenses and to maintain your plumbing system.

Trusting the professional for its advertisement only: It is advisable to trust the reputation and service quality of a plumbing service by having a background check for its clients. Many non-professional service providers try to capture clients through attractive advertisements and marketing. Therefore, always be careful and never compromise over the business reputation of professional service providers.

Get a copy of the Uniform Plumbing Code to make sure your plumbing is up to par.

Water Trickling Into the Bowl, or “Phantom Flushes: You may periodically hear your toilet begin to spontaneously refill, as though someone had flushed it. A toilet that cuts on and off by itself, or runs intermittently, has a problem that plumbers call a phantom flush. The cause is a very slow leak from the tank into the bowl. This problem is almost certainly caused by a bad flapper or flapper seat. The solution is to drain the tank and bowl, check and clean the flapper seat, and replace the flapper if it’s worn or damaged.

Tips for installing and repairing a gas line: Clean the gas pipeline after detaching it from the regulator- Most of the gas pipeline repair work is related to pipe clogging because residue gathers very fast in the small valves and parts of the pipeline. You need to detach the pipe from the regulator present in the cooktop. After detaching it, you need to use acetone to remove the dirt and soot that has got accumulated in the pipeline. The cleaning process should be done from time to time so that the pipe remains free from impurities and does not start leaking.

Tips for Choosing the Right Plumber – Beware that not all plumbers have experience with all types of plumbing situations. There are all types of people who learned the trade from on-the-job experience. They have had no other formal vocational training or certifications. So their ability to fix complex repairs is often learn-as-you-go. If that sounds scary to you, it should. You can trust the professionalism and expertise of master plumbers, like those at High Priority Plumber, who are trained professionals that keep current with their licenses. In addition, you want to verify that you are working with a licensed company. Licensing usually requires appropriate insurance and worker’s compensation so that you are not held liable if someone were to get hurt in your home while on the job.

Searching quality within cheap prices: Don’t get fooled by the cheap offers or other marketing strategies by some professional plumbing companies. Remember, quality has its price, therefore, do not compromise your safety. And always ask for proof in the form of licenses/certifications as a good company always satisfies its customers through trust building.