#1 Rated 24X7 Plumbing Companies Fairbanks 99708 AK (844-507-4350)

Posted by in Plumbing Companies, on December 5, 2017

Plumbing Emergency Firms in Fairbanks Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Fairbanks 99708 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Fairbanks 99708 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Fairbanks 99708 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Fairbanks 99708 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Fairbanks Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Fairbanks 99708 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Fairbanks 99708 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Fairbanks 99708 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Fairbanks 99708 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Yakutat 99689 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Willow 99688 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Wasilla 99687 AK (844-507-4350)

A float switch is the most common sump pump automatic switches.

Save Money on Bathroom Modelling – Do your own demo. Knocking down may not be as costly as rebuilding, but you can still shave dollars by doing some of the demolition yourself—as long as you proceed with care. “If a homeowner wants to demo a deck, well, I am sure they can handle that,” says Michael Winn, owner of Winn Design, in Virginia. “But when it comes to interior spaces, I would dissuade them from doing it unless they have done it before.” The reason: A reckless wrecker might unwittingly take out a load–bearing wall or, worse still, plunge a reciprocating saw into live wiring or pressurized plumbing. (For tips on how to do demo right, see our October 2005 feature, “Before You Construct, You Have to Destruct.”)

Shop around for tile. You can find nice floor and wall tile for $1 to $2 per square foot. Use that less expensive tile for most of the work, and then incorporate luxury tile as accents.

Know where to go when trouble happens. Should plumbing fail, will you know how to stop the flood? Locate the main shut-off valve for the home water supply. If it’s in a dark, hidden, or hard-to-reach place, gather any tools you’ll need for a quick shut-off, and store them nearby. There’s nothing like the frustration of a missing flashlight or a misplaced shut-off key when water’s pouring down the stairs from a broken pipe.

Neglecting Annual House Inspection: The smart approach, to avoid the gas leak hazards, is to get the house inspection, annually. Only the professional services should be hired for inspection. Since gas lines are usually hidden from the plain view, therefore, only a professional can detect the unobvious and deterioration signs in gas lines.

If your toilet won’t stop running than the float arm may not be rising high enough. To remedy this you will need to bend the float arm down or away from the tank wall.

Letting Coke soak in your toilet, is the easiest way to clean your bowl.

Tips for repairing burst pipes: Prevent the problem from occurring again- Once you have gone through the time consuming process of repairing a burst pipe, you need to make sure that the problem does not occur again in the future. Pipes can be saved from leaks and bursts by insulating them in winter and by checking them regularly. If you detect a small crack, you should immediately take action to prevent it from leaking. In case you are leaving for a vacation, you should turn off the main water supply. These small steps can save you from a lot of hassle and expense in the future.

Clean the Showerhead: Over time, your showerhead gets clogged with all sorts of minerals. Ensure that your shower head is working properly by cleaning it every so often. Remove the showerhead and soak it in vinegar overnight. Wipe down the showerhead and rinse it thoroughly. Reattach the showerhead. That way you can safely remove deposits so that your shower works properly.

Choose a water heater with an appropriate first-hour rating (FHR) by estimating your family’s peak-hour demand for hot water

Check for a blocked soap drawer: Soap build up can be another cause for a leak. By blocking pipes and drainage tubes, water can’t drain properly. Remove the soap drawer and wash any excess soap off.

Prevent Frozen Pipes: One major plumbing maintenance tip, especially for winter, involves preventing frozen pipes. To do this, keep a small drip of water running all winter long or wrap plumbing insulation around your pipes.

The most common causes of dripping faucets, are worn washers, bad internal seats or worn/faulty faucet cartridges

Always test your plumbing for leaks before finalizing anything.

Slow down on the suds: Sometimes using too much detergent can cause lots of suds and lead to leaks. Check the washing machine door for any build up. This is a sign you’re using too much soap and overflowing the machine. Just a small amount of detergent is sufficient.

Tips to Hire a Local Contractor: Get At Least Five Estimates. You want to check the market to see who can give you the best price, but what most people find is that when they go with a plumber who has a substantially lower price than the others, that plumber often ends up using bad parts or doing subpar work. Getting five estimates ensures that you know how much doing a good job will cost so you don’t end up getting a plumbing company that does a bad job.

Determine the appropriate fuel type for your water heater. If you are considering electricity, check with your local utility company for off-peak electricity rates for water heating.

To determine the size of sump pump you need, you must know how much water you’ll need to be pumped, how high the water will be pumped and the length and size of pipe.

Tips for Fixing Low Water Pressure in Your Home: Do not use all the faucets at the same time- It is the most obvious reason for low pressure of water. Generally, when all the members of the family are at home, the use of faucets increases. This usually happens in the morning and the evening. When all the faucets work at the same time, the water supply to the individual faucets decreases. In order to avoid this problem members of the family should make use of the faucets one buy one. This ensures that all the members experience a proper flow of water.

Save Money on Bathroom Modelling – Don’t move the kitchen sink. Or the toilet, if you can avoid it. “That often becomes the biggest part of the plumbing–price increase,” says Richard Trethewey, This Old House plumbing and heating expert. If your new layout requires that you move the toilet, use the opportunity to upgrade the pipes at the same time. “That will save you money in the long run,” says Richard.

Save Money on Bathroom Modelling – Hit the recycling center. Do–it–yourselfers can reap big savings with recycled or lightly used fixtures and building materials. Habitat for Humanity operates about 400 ReStores nationwide, which offer salvaged materials at half off home–center prices. One caveat: Many contractors won’t work with salvaged items, or homeowner–supplied materials in general, because they don’t want to assume the liability if something goes wrong. That said, if you’re doing your own work, you can find anything from prehung doors to acrylic skylights to partial bundles of insulation. (To find a ReStore near you, visit habitat.org.)

Drain a quart of water from your water tank every 3 months to remove sediment that impedes heat transfer and lowers the efficiency of your heater.

If a pipe freezes shut off the water from the main valve. Than run the water from the faucet nearest to the frozen pipe so it may thaw.