#1 Rated 24X7 Plumbing Companies Fairbanks 99701 AK (844-507-4350)

Posted by in Plumbing Companies, on December 8, 2017

Plumbing Emergency Firms in Fairbanks Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Fairbanks 99701 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Fairbanks 99701 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Fairbanks 99701 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Fairbanks 99701 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Fairbanks Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Fairbanks 99701 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Fairbanks 99701 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Fairbanks 99701 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Fairbanks 99701 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Ward Cove 99928 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Ketchikan 99950 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Wrangell 99929 AK (844-507-4350)

Tips for repairing burst pipes: Check the source of the leak- If a pipe located behind a wall or in the ceiling bursts, you need to pin point the exact location of the leak to stop it. For this purpose, you need to drill a small hole into the drywall and allow the excess water to drain off. Then you can check the area which looks very damp. That is the source of the leak. Once the source is located, you can get the drywall removed from that area and ask a plumber to fix the leak. Drywall is not very expensive to replace so you should take a chance and try this method to solve the pipe bursting problem.

Do not use galvanized steel for your plumbing. Galvanized steel can be corrosion ridden. Copper plumbing is your best bet.

Perform a pipe inspection to check for leaks. You may have to look into some hard to see places such as under the home so make sure you use a flashlight. If you find a water leak in a pipe, you will have to get it repaired or replaced. You will have to shut off the main water valve so it can be repaired. It is wise to hire a plumber to do the job.

Consider leaving those vintage finishes. The point of your bathroom remodel might be a fresh, new look, but some things are easier to replace than others. For example, in older homes, wall tiles may have several coats of concrete and maybe wire lath. The difficulty in removing these can cause labor costs to skyrocket. Instead, you might want to keep the vintage tiles and spend your time and money elsewhere. And vintage finishes such as tile can be a cool feature as well.

Listen for unusual noises when your sump pump is running, strange sounds are signs something is seriously wrong

Tips on Hiring a Plumber: Choose a plumber who provides a good service at a fair price- You should always get appraisals for your plumbing job from two or three plumbing service providers. This can help you to get an idea as to the general rate in the market for the service that you require. You should choose the plumbing service company which you think is providing the service at a fair price. The company providing the service at the lowest rate is not necessarily the best one. In order to find a quality service provider, you should see which plumber gives you practical advice on the way to solve your problem.

Insulate exterior walls to prevent frozen pipes.

For safety as well as energy-efficiency reasons, when buying gas- and oil-fired water heaters, look for units with sealed combustion or power venting to avoid back-drafting of combustion gases into the home.

A leaky toilet can waste enough water to fill an Olympic sized swimming pool in one year. Now just imagine what that is doing to your bill.

The most common causes of dripping faucets, are worn washers, bad internal seats or worn/faulty faucet cartridges

Prevent the bursting of pipes as a result of change in the temperature. You need to allow the flow of heat to achieve beneath the sinks and in to the pipes, you must keep your cabinet doors of your bathrooms and kitchens open. It is essential to keep water running at both cold and hot faucets together with vanities that are in close proximity to exterior walls.

Do not install the water heater in an unheated basement.

Resolve Issues Early: It might seem easy enough to think that the little leak in your bathroom faucet can wait until later to get fixed. However, you will be thankful that you took care of the situation early on before it got bigger and more expensive.

Save Money on Bathroom Modelling – Make sweat equity count. Unless you’ve got loads of time (and expertise) to spend on your project, the best way to add sweat equity is up front, by handling your own demolition, or at the back end, by doing some of the finish work yourself. “If you want to save money, dig in and start helping out,” says Tom Silva. “You can insulate, you can paint, you can sand.” Or better still, he says, help with cleanup every day. “Instead of paying someone to pick up sawdust off the floor, put your money into the time it takes to trim the window properly,” he advises.

Install a toilet yourself. The costs of installing fixtures also adds to the cost of a remodeling project. One thing that many homeowners can do themselves is hook up a new toilet, which can take just one hour.

How to deal with water damage? Get in touch with your insurance company- In case your house is full of water because of a flood or hurricane, you need to contact your insurance company for inspection before shifting or moving anything. This process needs to be quick in order to minimize the damage caused by water stagnation. If you need to move certain things immediately, you should take photographs which can serve as proofs. Once the water remediation inspector checks the extent of damage, you can start the recovery process. Insurance can provide you with financial relief at such a difficult time.

Control indoor moisture to prevent mold: The key to stopping mold and mildew is to control dampness. The worst infestations usually occur in damp crawlspaces, in attics and walls where water has leaked in from the outside, and in basements with poor foundation drainage. Stopping leaks, ensuring good ventilation in attics, keeping crawlspaces dry and routing water away from the foundation are the best defenses.

A pedestal sump pump works well if you have a smaller diameter basins

Keep in mind that homeowner’s insurance provides coverage for damage that is sudden and accidental. Damage that results from lack of maintenance is not covered on a standard homeowners insurance policy. If it’s too late and you’re already dealing with a wet disaster, check out advice on how to minimize water damage in your home.

Tips for maintaining your bathroom plumbing: Maintain the right water pressure- Both high pressure and low pressure of water supply are not desirable. Low pressure of water can slow down all the daily activities and cause a lot of annoyance. On the other hand, high pressure of water supply can cause a lot of stress for the pipes. If the pipes are not able to withstand this constant pressure, they can break and cause leaking. It is important to adjust the water pressure with the help of a regulator in order to maintain the pipes and prevent water damage due to leaking.

When your pipes bang while turning on the water, its time to add straps and cushion the pipes with a rubber layer.

Ways in Which You Can Prevent Water Damage: Make sure your yard is sloped- The slope of the land surrounding your house needs to span at least 6 to 10 inches in order to facilitate the flow of water away from the foundation of the house. If the slope is not adequate, then the water gathers near the foundation and causes damage to the walls. It makes them weak by creating leaks and cracking the masonry. The dampness can provide the right conditions for mold and rot to spread which can eat away at the base of your house. To prevent such damage, you should slope your yard properly.

High-efficiency toilets are available in a wide range of models