#1 Rated 24X7 Plumbing Companies Eielson Afb 99702 AK (844-507-4350)

Posted by in Plumbing Companies, on February 21, 2018

Plumbing Emergency Firms in Eielson Afb Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Eielson Afb 99702 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Eielson Afb 99702 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Eielson Afb 99702 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Eielson Afb 99702 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Eielson Afb Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Eielson Afb 99702 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Eielson Afb 99702 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Eielson Afb 99702 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Eielson Afb 99702 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Toksook Bay 99637 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies New Stuyahok 99636 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Nikiski 99635 AK (844-507-4350)

Use food coloring, to test for a leaky toilet. Place a few drops in your toilets water tank. Wait a few hours, then check the bowl to see if there is any color there. If there is, it’s an indicator that you have a leaky flapper

If your toilet won’t stop running than the float arm may not be rising high enough. To remedy this you will need to bend the float arm down or away from the tank wall.

Tips for maintaining plumbing during winter: Prevent the clogging of drains- It is very important to keep the drain pipes free from clogging because a clogged drain does not allow water to pass through quickly. If your drain pipe is blocked, you should immediately clean it because the water which does not get drained due to pipe clogging can get accumulated and freeze into a block of ice in winter. This can create a tremendous pressure on the inside of the pipe which can lead to cracks. These cracks can widen and cause the pipe to burst in the future. So it is important to unclog the pipes regularly.

Ways to Prevent Washing Machine Leaks: Tighten the hose connections- Hose connections provide water to the hoses which in turn supplies hot and cold water to the washing machine. The moment the spin cycle starts, a lot of pressure is created because water gets filled up in the machine. Not only the hoses but the connections too have to withstand this pressure. It can so happen that with regular use, these connections may become loose and start leaking. To prevent this, you need to check your hose connections from time to time and tighten them up if they appear to be loose.

Automatic Washing Machine Water Shutoff Valve and Leak Sensor – This “intelligent” valve does it all to protect against catastrophic water damage from a burst inlet hose connected to a washing machine that is in use or unattended! It allows water to flow only when it senses that the washing machine is turned on and stops water from flowing if the machine is turned off. It also stops water from flowing if it senses excessive water flow or detects a leak. Easy to hookup yourself. Can be found online for under $200. A great investment to prevent all washing machine leaks regardless of the cause.

Create a vanity from a piece of old furniture. “If you want to get creative, and you have that creative gene … you can create something unique,” Redd says. If your vanity is wood, refinish or paint it rather than buying a new one. She bought a used piece of furniture for $45, a cultured marble top for $150 and two sinks on closeout for $50 each, creating a unique double vanity for just $245.

Don’t delay cleanup: The longer things stay wet, the more likely you’ll have permanent damage. Delay can also lead to mold problems inside walls, which can cost thousands to eradicate. So before you run off to buy plumbing parts, clean up the mess. Pronto.

How to deal with water damage? Get in touch with your insurance company- In case your house is full of water because of a flood or hurricane, you need to contact your insurance company for inspection before shifting or moving anything. This process needs to be quick in order to minimize the damage caused by water stagnation. If you need to move certain things immediately, you should take photographs which can serve as proofs. Once the water remediation inspector checks the extent of damage, you can start the recovery process. Insurance can provide you with financial relief at such a difficult time.

Bathroom Design Tips – Curbless Shower with a Bench and Grab Bars – This doesn’t have to look as antiseptic as it sounds. Think in terms of a tiled shower area with recessed shelves at arm’s level to stop you from having to stoop down to the floor or reach up to a shower rack. Add a matching ceramic bench and grab bars that come in brushed nickel, chrome or bronze to match your faucet hardware. They will look more upscale than the white plastic hospital variety.

If the issue isn’t #11 than check to see if you have a water-filled float ball. If this is the case than it is time to replace the ball.

Take sure to check all of your pipes for leaks, even just a small leak can waste nearly 20 gallons of water per day. Just imagine what a larger leak can do.

Insulate your electric hot-water storage tank and pipes, but be careful not to cover the thermostat.

Tips to Hire a Local Contractor: Take into Account How Long They’ve Been in Business. You want to ask the plumbing company just how long they’ve been in business and how many years of experience the plumber has. A company that has been in business for a long time has shown that they are known in the community for doing quality work.

It’s a myth that low flow toilets don’t perform as well as regular flow toilets

Keep an eye out for trouble. When it comes to plumbing, little leaks can lead to big problems. Be alert to signs of impending plumbing failures: Leaking faucets, damp cabinets, rocking toilets or dripping refrigerators all signal problems that need prompt attention.

Use pipe insulation to prevent sprayer snarls. If you have to jiggle the hose as you pull out your kitchen sink sprayer, chances are the hose is catching on the shutoff valves. For smooth operation, slip 1/2-in. foam pipe insulation over the pipes and shutoff handles. Tape it if it won’t stay put. Get the insulation at home centers for about $3.

Single-lever shutoff valve – If you are a conscientious launder like my mother and can remember to turn the water off after each load of wash, replace your dual faucets with a single-lever faucet that lets you controls both hot and cold water at the same time. A low cost solution that’s easy to use! Pick one up at any hardware store for about $25.

Check how well your toilets are flushing. In case the handle has to be played with in order to keep the water from running constantly, or if perhaps it needs to be held down many times in order to flush, you might need to switch out a number of the parts in your tank. This is not expensive, plus it might help lower your monthly water bill. It may also imply that you steer clear of the embarrassment of the flushing system breaking if you have visitors!

Clean the Showerhead: Over time, your showerhead gets clogged with all sorts of minerals. Ensure that your shower head is working properly by cleaning it every so often. Remove the showerhead and soak it in vinegar overnight. Wipe down the showerhead and rinse it thoroughly. Reattach the showerhead. That way you can safely remove deposits so that your shower works properly.