#1 Rated 24X7 Plumbing Companies Eek 99578 AK (844-456-4168)

Posted by in Plumbing Companies, on October 12, 2017

Plumbing Emergency Firms in Eek Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Eek 99578 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Eek 99578 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Eek 99578 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Eek 99578 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Eek Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Eek 99578 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Eek 99578 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Eek 99578 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Eek 99578 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Togiak 99678 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Tuluksak 99679 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Tatitlek 99677 AK (844-456-4168)

Save Money on Bathroom Modelling – Bring in natural light without adding windows. Before cutting a big hole in the side of your house and rearranging the framing, consider less invasive—and less expensive—ways of capturing light. To brighten up a windowless bath or hallway, for instance, you can install a “light tube,” which slips between roof rafters and funnels sunshine down into the living space.

Tips for Fixing Low Water Pressure in Your Home: Locate the water pressure regulator- Many times a water pressure regulator is attached to the main supply valve. It is a wheel-like structure which can either decrease or increase the supply pressure. You can check whether your main supply valve has a regulator or not. If it is there, you can simply adjust it to increase the pressure of the flow of water to your house. It is better to leave this job to a plumber because the regulator is very tight and needs specific tools in order to make adjustments. The plumber also knows how much pressure your pipes can bear so he can make changes accordingly.

Always know where the main water shut-off valve is located in case of a leak.

Splurge on a few high-end materials. A little designer secret is that because bathrooms are usually smaller spaces, splurging on a few higher-end materials and finishes can be a good investment that can make your space seem incredibly luxurious. So before you issue a mandate that your bathroom will feature only the most basic, affordable materials, look at materials for wall and floor coverings, countertops and more on the higher end of the spectrum. You might find that adding one or more of these materials to a small portion of your bathroom is within your budget.

Check appliances regularly: Check and maintain your home appliances regularly for leaks, according to manufacturer’s directions.

Keep in mind that homeowner’s insurance provides coverage for damage that is sudden and accidental. Damage that results from lack of maintenance is not covered on a standard homeowners insurance policy. If it’s too late and you’re already dealing with a wet disaster, check out advice on how to minimize water damage in your home.

Tips for Fixing Low Water Pressure in Your Home: Contact the local water department- If there is no problem with any of your water supply pipelines, you need to check whether the municipal water lines supplying water to your main water pipe are in proper working condition or not. You can contact the water department to call them for an inspection. They can detect problems with the water supply lines and solve them. When the water supply becomes normal, the low water pressure problem gets solved.

How to deal with water damage? Facilitate the drying process- When there is water damage, it can take a long time to dry up. In order to accelerate this process, you should remove the wall board that is in touch with water. Drywall can absorb a lot of moisture, so it needs to be replaced. Opening the doors and windows and letting in air can quicken the process of drying. All wet items need to be removed, especially wet carpets. Wet-dry vacuum can help in removing the standing water. It can easily suck up the excess water and clear the surface of the flooring. Then the floor can be wiped to remove any leftover moisture content.

Observe the outlet on your sump pump to make sure water is actually being pumped

Act quickly if your pipes freeze! Shut down this type of water and open the faucet, enabling it to empty when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer on the pipe – this will quickly defrost it. You might wrap the pipe inside a heating pad or aim a heat lamp at it, but this may take quite a while. A last resort is to wrap the pipe in rags and pour boiling water over it.

Tips to Hire a Local Contractor: Take into Account How Long They’ve Been in Business. You want to ask the plumbing company just how long they’ve been in business and how many years of experience the plumber has. A company that has been in business for a long time has shown that they are known in the community for doing quality work.

Toilets and sinks require different types of plungers to remove clogs. Make sure you’re using the correct one.

Installing a special pressure pump will help raise pressure if all other repair options fail. The pump fills with water and then fills partly with air to keep an even pressure in your water lines. If you believe the problem is something serious that you have not been able to identify, you should enlist the services of a professional plumber.

If a sump pump fails, and water gets into the basement, do not attempt repairs without first turning off the power to all basement outlets.

Clean gutters and downspouts: Clean your gutters at least twice a year to avoid blockage and ice dams. Standing water can cause damage to your gutters and roof, and unmanaged overflow may create puddles that could damage your foundation. Don’t forget to clean downspouts to ensure water can flow through, and secure downspouts so that they point away from the home.

Tips for maintaining your bathroom plumbing: Remove blocks from the drainage system- Over a period of time, a lot of waste can get accumulated in the drain pipes and cause clogging. Slow drainage of water through the sink is an indication of a clogged drain. You can unclog the drain yourself by pouring a mixture of baking soda, vinegar and hot water in the drain. This can help in flushing the debris from the pipe and unclogging it. There is also the option of using snake pipes to pull out the obstructing elements from the drain pipes so that they start functioning normally.

Clean-outs: You should also find out where the clean-outs are. This is really important.

If your kitchen sink is clogged by grease, you can remove the clog by pouring ¼ cup of dish soap down the drain, wait about 20 minutes and then pour roughly a quart of boiling water in the drain