#1 Rated 24X7 Plumbing Companies Cordova 99574 AK (844-507-4350)

Posted by in Plumbing Companies, on February 13, 2018

Plumbing Emergency Firms in Cordova Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Cordova 99574 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Cordova 99574 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Cordova 99574 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Cordova 99574 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Cordova Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Cordova 99574 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Cordova 99574 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Cordova 99574 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Cordova 99574 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Anchorage 99524 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Indian 99540 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Adak 99546 AK (844-507-4350)

Baking Soda: Remove as much of the liquid that’s backed up as you can. Toss 1 cup of baking soda into the drain then pour a large pot or kettle of boiling hot water over top. If it empties completely, pour down another kettle to give it another hot flush and then let cool water run from the tap for a couple minutes.

Tips on Hiring a Plumber: Keep an eye on the response time- Many plumbing service companies take as long as 4 days to follow up. You should choose a reputable plumbing company which gets back to you within a short time because plumbing problems are close to emergencies. Water damage can be very severe and lead to a lot of expenses if it is not resolved. Professional plumbers are more responsive and have a good understanding of all kinds of plumbing problems. You should go for their services.

Check your water pressure: If the water pressure to your home is set too high, pipes and hoses may fail under the pressure. Buy a water pressure gauge at a local hardware store, attach it to an outside faucet, and turn the faucet to full force. The gauge will give you a reading of the home’s water pressure. Typical residential water systems are designed for water pressure of 40 to 70 psi. If your home’s water pressure exceeds 100 psi, install a pressure regulator (which is available at hardware stores as well.)

High-efficiency toilets are available in a wide range of models

Use sealant on all gaps and joints.

Check for a blocked soap drawer: Soap build up can be another cause for a leak. By blocking pipes and drainage tubes, water can’t drain properly. Remove the soap drawer and wash any excess soap off.

Slip joint pliers can be used to loosen the collar nuts on a drain line.

A pedestal sump pump works well if you have a smaller diameter basins

What to look for in your next contractor – Always ask what is provided for the quoted price.

Let There Be Lighting: Builder-grade lighting is one of the first things many people want to change in a bathroom renovation, and with good cause: The fixtures rarely hold much aesthetic appeal. Adding lots of light to a bathroom is one of the most valuable changes a homeowner can make, and it doesn’t have to break the bank. Shop sales at lighting and home improvement stores, and if your bathroom has easy roof access, consider bringing the outdoors in with a budget skylight like Solatube.

If a supply tube break off is causing a leak, screw in a blind cap to seal off the leak until it can be fixed.

Clean visible mold immediately: Surface molds grow in just about any damp location, such as the grout lines of a ceramic tile shower. To get rid of mold, scrub with detergent and water and let the surface dry completely. Or use a solution of 10 percent bleach and 90 percent water (a stronger bleach solution will not give better results). Spray or brush on the solution, let it sit 10 minutes, then rinse it off and let dry. A nontoxic mold control product called Concrobium ($10 for 22 oz. at home centers) can be effective if used every few months.

Look for Broken Hose Bibs and Frozen Pipes. Freezing water is a major cause of home plumbing damage. Many a plumbing repair is necessitated by water that’s expanded into ice, bursting pipes and other home plumbing components. When shifting from liquid to solid state, water swells by 9%. For this reason, homeowners should shut off and drain water systems prior to hard freezes. In the spring, check that all parts of your home plumbing system are still functional. Check faucets, outside spigots, and all parts of your plumbing schema. Beyond functionality, check for leaking pipes and pooling water. Should you discover ice damage, arrange for several quotes from local residential plumbers – doing so will generally win you a lower bid.

Plastic piping is much easier to install, adjust and tighten if a leak develops, than metal piping

Don’t Toss Money Down the Toilet — Update It. Here’s some potty talk you won’t want to miss: When remodeling your bathroom, consider replacing your toilet seat and lid instead of tossing out the whole porcelain perch. Just changing out these two tops can give your toilet a fresh look without buying a new unit, which saves you plumber installation fees, too.

Know what a bathroom remodel costs. Before you begin any project, it’s important to put your expectations into perspective when it comes to how much money you’re willing to invest. The size of your bathroom, the quality of materials you want to include and whether you’re planning to do some of the labor yourself all can affect the cost of a remodel. Here’s a look at estimated costs for a basic, mid- to upper-range and deluxe bathroom remodel.

Deaden sounds with expanding foam. Fill the space between two stainless steel sink basins with expanding foam. The foam deadens vibrations and lessens the gong effect. It’s possible to do this with the sink in place but much neater and easier before installation. Either way, let the foam harden and then trim away the excess with a knife.

Ways to choose your plumber – Licensure – Most states require plumbers to hold a license, though a couple of states like New York and Kansas do not. If your state does not require licensing, check to see if there have been any formal complaints filed against the plumber you are considering.