#1 Rated 24X7 Plumbing Companies Copper Center 99573 AK (844-507-4350)Posted by Lee in Plumbing Companies, on November 19, 2017
Plumbing Emergency Firms in Copper Center Alaska
24X7 Operation – Get FREE Quote Click to Call
Plumbing Companies Copper Center 99573 AK: Here is what you can do about your frozen water pipe
Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Copper Center 99573 AK.
Pipes which are likely to get frozen
The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.
Signs of a frozen water pipe
The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Copper Center 99573 AK.
When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.
Frozen pipe repair tips
Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.
Finding the root of the problem
If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.
Thawing a frozen pipe
Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.
Your presence is necessary
When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.
Using safe heat sources
You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Copper Center 99573 AK.
Calling the plumber
If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Copper Center 99573 AK.
How to avoid refreezing of the pipes in the future?
The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.
These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Copper Center 99573 Alaska.
Plumbing Companies Copper Center 99573 Alaska: General Tips!
#1 Rated 24X7 Plumbing Companies Cantwell 99729 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Central 99730 AK (844-507-4350)
How to deal with water damage? Start cleaning up immediately- The longer you wait to start the cleaning process, the more damage is caused due to dampness. Things which could have been saved, reach a stage where they become beyond repair. Delay in cleaning up can cause the walls to become soft and weak due to moisture. It can lead to growth of mold which can be very difficult to eradicate. In order to avoid the financial costs of replacing so many damaged items, you should sort out the items and keep them out for drying. The flooring should be wiped clean after mopping of water and all ventilation sources should be opened to facilitate the drying process.
Using two wrenches at once turning in opposite directions is called “backing off” and allows the wrench to absorb the stress and not the plumbing.
If pipes do freeze, don’t panic. First, shut off the water supply to the house, then open a faucet near the blocked area to vent vapors from the frozen water. If you suspect that pipes in the hot water system are frozen, turn off the hot water heater. Use a hair dryer to warm the frozen pipe (never use an open flame to thaw a pipe), starting at the end of the pipe nearest to the tap. (Don’t use a hair dryer in areas of standing water.) You’ll know the pipe has begun to thaw when water begins to trickle from the open faucet. When the flow is restored, check the plumbing carefully for cracks or leaks.
Tips for Fixing Low Water Pressure in Your Home: Check individual faucets- If one of your faucets is not providing adequate flow of water, you need to check whether the problem is just with that faucet or with all the faucets. In case only one faucet turns out to be faulty, you can check what is restricting its flow. The aerator may be clogged, the stop valve may be partially closed or the washer may be dislodged. Once you identify the fault, you clean it out or remove it. You can also check the supply valves which are present below the faucets to see whether the valve is completely open or not. This can solve the problem.
Ways in Which You Can Prevent Water Damage: Check your roof for leaks- The roof is the most vulnerable part of your house because it is exposed to the harsh rays of the sun as well as heavy downpour. Such an onslaught can damage the shingles of your roof. This can cause water leaks which can spoil the interiors of your house. You need to check your roof at least once in a year to see whether there are any missing or broken shingles. In case there are a few such shingles, you should immediately get them repaired or replaced. Sometimes the caulking can also get cracked. This too requires repairing.
The most common causes of dripping faucets, are worn washers, bad internal seats or worn/faulty faucet cartridges
Clean the filters: Sometimes your machine will have problems filling or leaking from the back. Check the inlet filters to make sure they are clean. Clogged filters can prevent proper water flow.
Water Trickling Into the Bowl, or “Phantom Flushes: You may periodically hear your toilet begin to spontaneously refill, as though someone had flushed it. A toilet that cuts on and off by itself, or runs intermittently, has a problem that plumbers call a phantom flush. The cause is a very slow leak from the tank into the bowl. This problem is almost certainly caused by a bad flapper or flapper seat. The solution is to drain the tank and bowl, check and clean the flapper seat, and replace the flapper if it’s worn or damaged.
Tips for Choosing the Right Plumber – See how transparent the company is about sharing their reviews. In today’s technological world, there are many ways to find out about how a company is rated. A plumbing company that is transparent readily shares reviews on their website and also has good feedback on their social media. In addition, you can check reviews on Yelp and Angie’s List. And don’t forget to see what rating the company has with the Better Business Bureau. Another way a company shows transparency is through their affiliations.
Tips to Hire a Local Contractor: Take into Account How Long They’ve Been in Business. You want to ask the plumbing company just how long they’ve been in business and how many years of experience the plumber has. A company that has been in business for a long time has shown that they are known in the community for doing quality work.
Bathroom Design Tips – Curbless Shower with a Bench and Grab Bars – This doesn’t have to look as antiseptic as it sounds. Think in terms of a tiled shower area with recessed shelves at arm’s level to stop you from having to stoop down to the floor or reach up to a shower rack. Add a matching ceramic bench and grab bars that come in brushed nickel, chrome or bronze to match your faucet hardware. They will look more upscale than the white plastic hospital variety.
When a metal drain leaks it’s usually a great idea to replace the metal with plastic piping
Submersible sump pumps are more adapted to larger sump basins
Learn how to tackle small problems. With a few tools and a little knowledge, most of us can handle small plumbing emergencies. With a plunger, a pipe wrench and a sewer snake in your tool kit, you’ll be able to take care of small problems like clogged drains, blocked toilets, stuck valves and dripping faucets. How-to books, home improvement stores and adult education classes can pay for themselves when it’s time to call the plumber.
Recent announcements of increases in energy prices also mean it’s worthwhile getting your heating system checked out to ensure it operates at maximum efficiency. Old systems, or systems which are not running as well as they could be, are likely to be costing you more than necessary, so a check up can be hugely cost-effective over the long-term.
Planning ahead is important when it comes to such an important aspect of your home such as plumbing and heating. Problems which do occur can be devastatingly expensive and inconvenient, so putting the work in now can save you a great deal of hassle and money.
Determine the appropriate fuel type for your water heater. If you are considering electricity, check with your local utility company for off-peak electricity rates for water heating.
Water main: You should check your lines to find out where the water main closes. For instance, if you reside in a condominium, you should check if each unit shuts off. Aside from this, you may want to check if the entire building needs to be turned off. So, this is important if you have a bad leak.
Tips for Fixing Low Water Pressure in Your Home: Contact the local water department- If there is no problem with any of your water supply pipelines, you need to check whether the municipal water lines supplying water to your main water pipe are in proper working condition or not. You can contact the water department to call them for an inspection. They can detect problems with the water supply lines and solve them. When the water supply becomes normal, the low water pressure problem gets solved.
Look for Drips. Puddles of water on your basement floor are an obvious sign of a plumbing leak. But, in many cases, a loose valve or cracked pipe may simply cause condensation to build up in a specific area. Odor-causing bacteria and mold can begin to form in these places. If you suspect a leak, having your plumbing inspected by a Ragsdale professional can help you save money and avoid replacing damaged drywall and carpeting.
Check the water inlet valve: Locate the water inlet valve and check to see if there is a leaky connection. It may be as simple as tightening the connection to prevent further leaking.