#1 Rated 24X7 Plumbing Companies Cooper Landing 99572 AK (844-456-4168)

Posted by in Plumbing Companies, on September 26, 2017

Plumbing Emergency Firms in Cooper Landing Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Cooper Landing 99572 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Cooper Landing 99572 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Cooper Landing 99572 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Cooper Landing 99572 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Cooper Landing Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Cooper Landing 99572 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Cooper Landing 99572 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Cooper Landing 99572 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Cooper Landing 99572 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Yakutat 99689 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Wasilla 99687 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Willow 99688 AK (844-456-4168)

Insulate your gas or oil hot-water storage tank and pipes, but be careful not to cover the water heater’s top, bottom, thermostat or burner compartment; when in doubt, get professional help.

Tighten everything, but not too tight.

To determine the size of sump pump you need, you must know how much water you’ll need to be pumped, how high the water will be pumped and the length and size of pipe.

If your toilet is making noise it can be due to restricted water flow or a defective ball cock assembly. This can be addressed by replacing the entire ball cock assembly or oiling the trip lever. Prior to doing this please make sure to adjust the shut off valve first. Additionally be sure to turn off the water at the fixture shut off valve followed by flushing the toilet to an empty tank. Sponge up any remaining water.

Don’t pour oils, grease or fat down the sink. When they cool, they may harden and make clogs within your drains. This is especially true for those who have a garbage disposal, as the fat may cause the blades to perform slower and less efficiently. Keep a container in your kitchen that is utilized specially for discarded grease.

Check the aerator in the faucets to see if they need to be cleaned. Remove the aerator using pliers or a crescent wrench. You will find a small screen inside of the faucet head. Remove the screen and thoroughly rinse it. Before replacing the screen, turn on the water to see if the water is flowing properly.

Know how to turn off the water heater. If it’s a gas water heater, turn the switch to the “pilot” position.

Tips for maintaining your bathroom plumbing: Repair leaks in faucets and showerheads- Leaking faucets is a problem that many people face frequently. This can happen if the washer breaks due to regular use of the faucet. There can be problems with the shower faucet too which can lead to leaks from the shower head. Dripping faucets and showerheads are very annoying and cause a lot of water damage if they are not repaired quickly. You should call a plumber to check the source of the leaks and get it repaired immediately to solve the problem.

Ways to Unclog Drains: Your dish detergent can unclog your pipe- Something as simple as a dish detergent can be used to remove obstacles from the drain pipe. You need to pour a small quantity of the liquid detergent down the drain and follow it up with some boiling water. The detergent can lubricate the sides of the drain and force the dirty residue to break into smaller components and the hot water can flush away the grease. You can make use of a plunger to push down the remaining dirt and clean your pipe.

The Drain Snake: This is a fairly low-tech piece of equipment that works wonders. It’s basically a long flexible metal rope with a spiral of metal at the end. The following video shows you just what to do.

Hit the Salvage Hard: Home decor blogger Anita Joyce found a large piece of salvage barn wood to serve as a shower curtain valance. It looks like a pricey piece and serves as a focal point, but it was definitely a budget item. Salvage can be intimidating, but if you start by checking out antique stores, flea markets, resellers and auctions, you’ve already got the idea, she says. You just have to go do it to really figure it out … and that’s how you score the really great items. You can also salvage and redo cast iron tubs, light fixtures, even sinks … basically anything that fits your style and you want to put the effort in to saving and making your own!

Let There Be Lighting: Builder-grade lighting is one of the first things many people want to change in a bathroom renovation, and with good cause: The fixtures rarely hold much aesthetic appeal. Adding lots of light to a bathroom is one of the most valuable changes a homeowner can make, and it doesn’t have to break the bank. Shop sales at lighting and home improvement stores, and if your bathroom has easy roof access, consider bringing the outdoors in with a budget skylight like Solatube.

Save Money on Bathroom Modelling – Partner with a contractor. Though the practice is controversial among the trades, some contractors will offer consulting and mentoring services to skilled do–it–yourselfers on an hourly basis. Chicago–area builder Ted Welch charges $150 per hour for such coaching, with a two–hour minimum commitment. “The most satisfied clients tend to be those who have good manual dexterity, who realize that skills need to be practiced in order to be perfected, and who are willing to risk making a few mistakes and then learn from them,” he says.

Have more than one way of drying out your bathroom. Reducing mold and mildew begins with removing moisture. To do that it’s best to have a multifaceted approach: a great fan that vents to the outside (not into an attic) and an operable window.

If your plumbing is making strange noises you could have lost something called your “air cushion”. To turn this back on, you’re likely to must switch off your primary water supply. Run all faucets in your home and after that reverse on the main water supply. This will make everything sound better again.