#1 Rated 24X7 Plumbing Companies Circle 99733 AK (844-507-4350)

Posted by in Plumbing Companies, on October 31, 2017

Plumbing Emergency Firms in Circle Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Circle 99733 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Circle 99733 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Circle 99733 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Circle 99733 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Circle Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Circle 99733 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Circle 99733 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Circle 99733 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Circle 99733 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Kotzebue 99752 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Kobuk 99751 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Kivalina 99750 AK (844-507-4350)

Punch It Up With Paint: Don’t underestimate the impact a pop of colorful paint can have in a small space. If you coordinate with a detail like your tile work, it can bring an entirely new dimension to your bathroom that you might never have noticed before, says Mary Elizabeth Hulsey, founder of Mission Stone & Tile in Nashville, Tenn.

But don’t act rashly: Your first impulse will be to wade in and rescue your stuff. But that water might be dangerous, so put on your boots and take precautions. Any water in contact with electricity might be deadly. Stay out of the water until you, an electrician or your utility has turned off the power to your basement. Floodwaters may contain toxic chemicals and will almost certainly breed dangerous bacteria. Protect cuts and open sores from floodwaters and wear plastic gloves when handling your possessions.

Tips for maintaining your bathroom plumbing: Prevent pipes from freezing in winters- Frozen water pipes are a common phenomenon during winter. If a pipe freezes up, it can burst in a short time if it is not thawed. However, you can prevent the pipes from freezing with the help of pipe insulation techniques. There are insulating pipe sleeves which are available that protect the pipe from cold temperatures. You can also seal doors and windows tightly to avoid cold air from coming into the room. Maintaining the house temperature at an adequate level can prevent pipes from freezing. You should make use of all the faucets so that water is not allowed to freeze. Such preventive measures are much better than spending on repairing or replacement of a burst pipe.

Don’t go crazy when using detergents, bleach or other chemicals, over using these products can kill the natural bacteria that your septic system needs

A clog can often be yanked out with an easy tool like a Zip-It or other flexible-shaft pick-up tool

The Bowl Empties Slowly: A bowl that empties slowly — also known as a weak flush — is usually the result of clogged holes underneath the rim of the bowl. Use a curved piece of wire to poke gently into each flush hole to clear out any debris. Coat-hanger wire works fine, and a small mirror will help you see under the rim. You can also use wire to loosen debris that may be blocking the siphon jet in the bottom of the drain. Be careful not to scratch the bowl.

Watching home improvement shows and reading DIY plumbing blogs, doesn’t make you a master plumber. Plumbers spend years training and learning the plumbing trade, it’s best to leave big plumbing issues to the professionals and save yourself the headache.

Install a toilet yourself. The costs of installing fixtures also adds to the cost of a remodeling project. One thing that many homeowners can do themselves is hook up a new toilet, which can take just one hour.

Washer floor tray – If you can’t afford to replace or repair your leaking washing machine right away or want to protect against future leaks, slide a water catching tray under your washing machine to catch drips and leaks. It’s a simple, inexpensive way to prevent water damage to your floor from a leaky washing machine. Purchase price around $20.

If the issue isn’t #11 than check to see if you have a water-filled float ball. If this is the case than it is time to replace the ball.

One of the greatest benefits of having your heating looked at now rather than waiting until something breaks, is that you have the luxury of time. Because you aren’t dealing with the pressure of a cold house, you can take your time to find a good plumber with reasonable prices, and can afford to wait a couple weeks for an appointment at a convenient time if need be.

Tips for repairing burst pipes: Check the source of the leak- If a pipe located behind a wall or in the ceiling bursts, you need to pin point the exact location of the leak to stop it. For this purpose, you need to drill a small hole into the drywall and allow the excess water to drain off. Then you can check the area which looks very damp. That is the source of the leak. Once the source is located, you can get the drywall removed from that area and ask a plumber to fix the leak. Drywall is not very expensive to replace so you should take a chance and try this method to solve the pipe bursting problem.

Plastic piping is much easier to install, adjust and tighten if a leak develops, than metal piping

Clean the filters: Sometimes your machine will have problems filling or leaking from the back. Check the inlet filters to make sure they are clean. Clogged filters can prevent proper water flow.

If your shower head is leaking from where it meets the arm than you may need to just replace a washer. You can do this by loosening the collar using a tape-wrapped rib-joint pliers.

Ways to Unclog Drains: Baking soda and salt can also help- Instead of vinegar; you can combine salt with baking soda and drop the mixture into the drain. You need to leave it there for half an hour so that it sticks to the sides of the drain. After that you can pour hot water in the drain pipe so that the chemical reaction can destroy the sticky and greasy waste and push it down the drain to get flushed out of the pipe. It is a good combination to remove the biggest blockages in the drain pipes.

If you heat with electricity and live in a warm and sunny climate, consider installing a solar water heater.

Consider “smart” bathroom timers and humidity sensors: Bath fan timers are important because excess humidity can cause everything from window condensation and mildew to moisture and rot inside walls. Some new wall switch timers have dual controls for turning off both lights and fans after a preset time. For the ultimate in smart bath fan timers, buy a humidity-sensing fan designed to automatically turn on and off as moisture levels at the ceiling rise and fall.

Know your water main: Know the location of your water main, and shut it off if you leave for an extended amount of time. If no water goes in to the house, chances are no faucet drips can wreak havoc on your home while you’re away.