#1 Rated 24X7 Plumbing Companies Chitina 99566 AK (844-507-4350)

Posted by in Plumbing Companies, on November 30, 2017

Plumbing Emergency Firms in Chitina Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Chitina 99566 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Chitina 99566 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Chitina 99566 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Chitina 99566 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Chitina Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Chitina 99566 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Chitina 99566 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Chitina 99566 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Chitina 99566 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Ketchikan 99950 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Wrangell 99929 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Ward Cove 99928 AK (844-507-4350)

The Dreaded Clog: Clogs are the most common toilet problems. Several tools can help you clear a clogged drain. A force-cup plunger is more effective than the familiar standard type for clearing minor clogs. Insert the bulb into the drain, and pump forcefully. Slowly release the handle, letting a little water in so you can see whether the drain is clear. Repeat if necessary. For serious clogs, use a closet auger. Insert the end of the auger into the drain hole, and twist the handle as you push the rotor downward. Use caution not to scratch the bowl.

Waiting for a response from professionals during gas leak: In case you don’t receive a timely response or due to unavailability of emergency repair service by the service providers, do not wait or jump in yourself. The next best move is to call the local fire department because these days, every fireman is trained to handle gas leaks professionally.

But don’t act rashly: Your first impulse will be to wade in and rescue your stuff. But that water might be dangerous, so put on your boots and take precautions. Any water in contact with electricity might be deadly. Stay out of the water until you, an electrician or your utility has turned off the power to your basement. Floodwaters may contain toxic chemicals and will almost certainly breed dangerous bacteria. Protect cuts and open sores from floodwaters and wear plastic gloves when handling your possessions.

Duct tape and leak sealing tape can help out in a plumbing emergency until a permanent fix can be made. Teflon tape will seal up leaks from around threaded connections.

Get a copy of the Uniform Plumbing Code to make sure your plumbing is up to par.

Make sure your bath fan is big enough: If the fans aren’t clearing out most of the moisture in your bathrooms after five to 10 minutes, your fans may not be moving enough air. Fans are certified by the volume (cfm, or cubic feet per minute) of air exhausted out of the room. To find the recommended fan capacity for your bathroom, multiply the bathroom square footage by 1.1 (assuming an 8-ft. ceiling; for a 9-ft. ceiling, multiply by 1.5). Check the cfm volume of your fan, usually marked on a label under the grille. Replace it with a larger model if it’s too small for the size of your bathroom.

Tips for installing and repairing a gas line: You can extend your gas line when you buy a new appliance- It is not necessary to replace the whole pipe line in case your existing one does not reach your new appliance. You can simply buy the required length of extra pipe and attach it to the existing one with the help of valves and screws. The place where you join the old and the new pipe needs to be properly sealed with the help of tape or a sealant to ensure that there are no leaks. The extended pipe can be attached to the new appliance for use.

Think about converting your tub to a shower. If you don’t take baths but have a bathtub, that’s basically a 5-foot by 2½-foot area that’s going to waste. Converting it to a shower would be cost effective, because it would make use of the space that’s already there and you wouldn’t have to reroute the plumbing.

Keep our number handy: 1-888-9TIGER1. You never know when you’ll have a plumbing emergency.

Tips for repairing burst pipes: Check the source of the leak- If a pipe located behind a wall or in the ceiling bursts, you need to pin point the exact location of the leak to stop it. For this purpose, you need to drill a small hole into the drywall and allow the excess water to drain off. Then you can check the area which looks very damp. That is the source of the leak. Once the source is located, you can get the drywall removed from that area and ask a plumber to fix the leak. Drywall is not very expensive to replace so you should take a chance and try this method to solve the pipe bursting problem.

If your plumbing is making strange noises you could have lost something called your “air cushion”. To turn this back on, you’re likely to must switch off your primary water supply. Run all faucets in your home and after that reverse on the main water supply. This will make everything sound better again.

Planning ahead is important when it comes to such an important aspect of your home such as plumbing and heating. Problems which do occur can be devastatingly expensive and inconvenient, so putting the work in now can save you a great deal of hassle and money.

Tips for Fixing Low Water Pressure in Your Home: See if there are any leaks- The low pressure of water supply can be caused by leaks in the water pipes. The water flows out from the cracks in pipes and reduces the pressure in other faucets. You need to check all the pipes in your house to see whether there are any leaks. If you find persistent dampness in one part of the ceiling or wall, it is an indication of a leak. Anomalies in the readings of the water meter can also give an indication of a leak. You should get it immediately repaired so that water does not get wasted and proper flow of water is restored in all parts of your house.

Lower the thermostat on your water heater; water heaters sometimes come from the factory with high temperature settings

Tips for maintaining your bathroom plumbing: Prevent pipes from freezing in winters- Frozen water pipes are a common phenomenon during winter. If a pipe freezes up, it can burst in a short time if it is not thawed. However, you can prevent the pipes from freezing with the help of pipe insulation techniques. There are insulating pipe sleeves which are available that protect the pipe from cold temperatures. You can also seal doors and windows tightly to avoid cold air from coming into the room. Maintaining the house temperature at an adequate level can prevent pipes from freezing. You should make use of all the faucets so that water is not allowed to freeze. Such preventive measures are much better than spending on repairing or replacement of a burst pipe.

You can also add some hot or boiling water to your bowl and try flushing, to correct a clog.

If your water pressure is too high, like over 80 pounds per square inch for example, it can cause damage to your faucet and create a leak

Use granite remnants for counters. Granite shops often have small bits of granite left over from bigger jobs and will sell you enough for a bathroom vanity counter at a discount. To find out what’s available, call your local shops first then drop by to see the granite and negotiate the price.

Save Money on Bathroom Modelling – Make sweat equity count. Unless you’ve got loads of time (and expertise) to spend on your project, the best way to add sweat equity is up front, by handling your own demolition, or at the back end, by doing some of the finish work yourself. “If you want to save money, dig in and start helping out,” says Tom Silva. “You can insulate, you can paint, you can sand.” Or better still, he says, help with cleanup every day. “Instead of paying someone to pick up sawdust off the floor, put your money into the time it takes to trim the window properly,” he advises.

Tips for installing and repairing a gas line: Always test the pipe before using it- Whenever you carry out a repair or replacement work on your gas lines, you should check the pipe for leaks before starting regular use of the gas line. For this purpose, you need to switch on the gas burner for some time and see whether gas is leaking or not. If there is a leak, you can get a distinct smell and hear a hissing sound coming from the pipe line. You need to turn off the gas immediately and seal the leaks. You should repeat this checking process till you are completely satisfied that there are no leaks.