#1 Rated 24X7 Plumbing Companies Auke Bay 99821 AK (844-507-4350)

Posted by in Plumbing Companies, on November 29, 2017

Plumbing Emergency Firms in Auke Bay Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Auke Bay 99821 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Auke Bay 99821 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Auke Bay 99821 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Auke Bay 99821 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Auke Bay Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Auke Bay 99821 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Auke Bay 99821 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Auke Bay 99821 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Auke Bay 99821 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Tuluksak 99679 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Tununak 99681 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Tuntutuliak 99680 AK (844-507-4350)

If you suspect a leak in your sink, toilet, water main, etc. turn off the water before attempting repairs

Plastic piping is much easier to install, adjust and tighten if a leak develops, than metal piping

Tape is only meant for pipe threads, don’t use tape on compressors or other connections

A leaky toilet can waste enough water to fill an Olympic sized swimming pool in one year. Now just imagine what that is doing to your bill.

Clean the filters: Sometimes your machine will have problems filling or leaking from the back. Check the inlet filters to make sure they are clean. Clogged filters can prevent proper water flow.

Tips on Hiring a Plumber: You should ask for references- If you are planning a remodelling project for your home for which you require the help of a professional plumber, then you should definitely ask him to provide examples of his past work. This can give you an idea whether you are hiring the right person for the remodelling job or not. If the plumber is hesitant to supply examples, it means that he is not sure about the standard of his work. You should be able to trust the plumber because you are planning to give a big responsibility to him. Only if the references and examples are satisfactory, you should hire his services.

If your drain is clogged you can pour half a box of baking soda and ½ a cup of vinegar down a the drain, then wait 30-45 minutes and pour boiling water down the drain.

Slow down on the suds: Sometimes using too much detergent can cause lots of suds and lead to leaks. Check the washing machine door for any build up. This is a sign you’re using too much soap and overflowing the machine. Just a small amount of detergent is sufficient.

Consider a corner sink. If you’ve got a tight space with potential traffic-flow problems due to how the entry door or shower door swings open, then consider putting your sink in the corner to free up space.

Tips for maintaining plumbing during winter: Remove all garden hoses- The outdoor pipes and fixtures are exposed to the freezing temperatures during winter. It is necessary to prevent the pipes from getting frozen. For this purpose, you need to disconnect all the garden hoses from the water supply faucet so that there is no residual water in these hoses which can freeze up and burst. These should be taken indoors and stored till winter gets over. Water supply to the outdoor spigots should also be shut off to prevent pipes from freezing. All the excess water in these spigots should be drained by turning them on.

Plunge water first before removing the trap. Before you remove a sink trap, give the drain a few plunges with a toilet plunger. This will push most of the water out of the trap, lessening the mess when you pull the trap. If you have a double sink, be sure to plug the other drain to contain the air pressure. If the strainer isn’t a screw-down style, you’ll have to hold it down while you plunge the drain.

Ways to Prevent Washing Machine Leaks: Tighten the hose connections- Hose connections provide water to the hoses which in turn supplies hot and cold water to the washing machine. The moment the spin cycle starts, a lot of pressure is created because water gets filled up in the machine. Not only the hoses but the connections too have to withstand this pressure. It can so happen that with regular use, these connections may become loose and start leaking. To prevent this, you need to check your hose connections from time to time and tighten them up if they appear to be loose.

Tips for maintaining your bathroom plumbing: Know the location of the main water valve- You should be aware of the location of the main valve of the water supply to your home. The reason is that if a big leak suddenly causes your house to get flooded with water, you should be able to stop the water supply at once so as to minimize the water damage and halt the wastage of water. The main valve is usually located outside the house beside the water meter. You should turn it off as soon as possible during an emergency.

How to deal with water damage? Disconnect the power supply- Water and electricity is a lethal combination which can be life-threatening. When your house is flooded with water, you should turn off the power supply to the rooms which are affected before starting the cleaning process. It is a precaution which must be taken without fail because you need to remove electric appliances and gadgets and deal with loose wires. In case the electricity supply is not switched off, you can get an electric shock. In extreme cases it can lead to death. So you should be careful.

Consider Open Shelves: The bathroom is a private place, but open shelving can create the illusion of space in smaller square footage, and with a less weighty wallet hit than cabinets. A few drawers or covered baskets on high shelves can house your private items, and your colorful towels, pretty soaps and washes, and other bathroom decor don’t have to hide in a dark closet any longer!

Have an older shower head? You can save up to 7.5 gallons of water per minute by replacing it with a newer model.

If a sump pump fails, and water gets into the basement, do not attempt repairs without first turning off the power to all basement outlets.

Use duct tape or pipe sealing tape to pull together a crack in a pipe, reducing the leak as a temporary solution.

Save Money on Bathroom Modelling – Limit recessed light fixtures. The more recessed lights you put in, the more it’s going to cost,” says Tom Silva, This Old House’s general contractor. In addition to the fixtures, there’s the labor to cut all the holes and insulate them properly. A wall– or ceiling–mounted light can also deliver more wattage, which means you may be able to get away with fewer fixtures.

Save Money on Bathroom Modelling – Don’t overspend on wall prep. If your walls are in such rough shape that it would take a painting contractor days of filling and sanding to make them ready for the roller, consider using materials such as Texturglas, from Deerfield Beach, Florida— based company Roos International. A breathable, nontoxic wall covering made of fine glass filaments, Texturglas has a similar look and feel to the fiberglass matting used in auto–body work. It’s available in a variety of surface patterns, takes paint readily, and is designed to be installed right on top of existing surfaces, adding strength while covering up dings.

What to look for in your next contractor – Verify that the plumber is insured. To get licensed, a plumbing business must secure insurance but always make sure. An uninsured plumber can sue you if he gets hurt while working a job at your home.

If you have a clogged sink do the following: a.) Turn off any faucet or appliance that drains into the drain. b.) Use either a plunger or snake to unclog. c.) Do not use any chemicals on the drain if it is COMPLETELY clogged.

Flood protection device – An automatic water leak detection device prevents flooding by immediately shutting off both the hot and cold water supply to the washing machine when sensors detect a water leak. These devices are quick and easy to install by homeowners and provide 24/7 protection against damage caused by washing machine floods. Some even sound an audible alarm. Price tag is less than $150.

Deaden sounds with expanding foam. Fill the space between two stainless steel sink basins with expanding foam. The foam deadens vibrations and lessens the gong effect. It’s possible to do this with the sink in place but much neater and easier before installation. Either way, let the foam harden and then trim away the excess with a knife.