#1 Rated 24X7 Plumbing Companies Anchorage 99512 AK (844-456-4168)

Posted by in Plumbing Companies, on October 3, 2017

Plumbing Emergency Firms in Anchorage Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Anchorage 99512 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Anchorage 99512 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Anchorage 99512 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Anchorage 99512 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Anchorage Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Anchorage 99512 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Anchorage 99512 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Anchorage 99512 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Anchorage 99512 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Saint Marys 99658 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Saint Michael 99659 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Saint Paul Island 99660 AK (844-456-4168)

What to look for in your next contractor – A reputable plumber will not only provide you with a quote and upon request will give you a price ceiling if the problem goes beyond what expected. If the plumber can’t give you a quote over the phone because of the type of damage, ask for a “worst-case-scenario” quote.

Save Money on Bathroom Modelling – Donate your trash. Before you begin a remodeling job, invite the local Habitat for Humanity chapter to remove materials and fixtures for later resale. “About 85 percent of a house is reusable,” says B.J. Perkins, Habitat’s ReUse program manager, in Austin, Texas. “We can do a total takedown, or do a cherry-pick job and take the cabinets, the tub, the sink, and so on.” You save space in the landfill, collect a charitable tax credit for the donation, and help a good cause. Visit Habitat’s website (see Way to Save #3) to find an affiliate near you.

Use pipe insulation to prevent sprayer snarls. If you have to jiggle the hose as you pull out your kitchen sink sprayer, chances are the hose is catching on the shutoff valves. For smooth operation, slip 1/2-in. foam pipe insulation over the pipes and shutoff handles. Tape it if it won’t stay put. Get the insulation at home centers for about $3.

What to look for in your next contractor – like with any other contractor, you should only hire a licensed plumber. Without a license, the plumber’s credentials are unverifiable, and more likely than not, they will show the same level of attention to your job as they did to their business.

Ways to Unclog Drains: Your dish detergent can unclog your pipe- Something as simple as a dish detergent can be used to remove obstacles from the drain pipe. You need to pour a small quantity of the liquid detergent down the drain and follow it up with some boiling water. The detergent can lubricate the sides of the drain and force the dirty residue to break into smaller components and the hot water can flush away the grease. You can make use of a plunger to push down the remaining dirt and clean your pipe.

Buy a framed mirror or frame your existing mirror. That small change can quickly give your bathroom a more glamorous look. If your mirror is small, you may be able to buy a frame at a yard sale or thrift store. For a large mirror, use molding to build a frame.

Prevent frozen pipes before they start. Best defense: insulation. Insulate exposed pipes in a crawl space or in the garage with easy-to-install plastic insulation. It’s a peel-and-stick solution. Before winter comes, remove exterior hoses, and apply insulating caps to outdoor fixtures, as a frozen exterior spigot can damage interior pipes. Households with automatic sprinkler systems can clear standing water with compressed air.

What to look for in your next contractor – Check to see if the company has any awards or professional affiliations. Both point to a plumber who not only has been in business for a while but has done a good job of it during that time.

Tips for maintaining your bathroom plumbing: Make use of a water softener- The water supply that comes to your house from the municipal corporation is hard water which contains a number of heavy minerals. These minerals get deposited in the pipes and corrode it in the long run. In order to prevent this problem, you should invest in a water softener which filters out these elements from the water so that you can get better quality water supply. Your pipes also remain protected from corrosion and this can help in increasing their longevity.

Use strainers on all drains to hold foreign objects and debris from clogging drains. You ought to clean your kitchen area sink’s strainer whenever you will discover a large particle that’s kept in it. Clean bathtub drain screens as frequently when necessary.

Recent announcements of increases in energy prices also mean it’s worthwhile getting your heating system checked out to ensure it operates at maximum efficiency. Old systems, or systems which are not running as well as they could be, are likely to be costing you more than necessary, so a check up can be hugely cost-effective over the long-term.

Determine the appropriate fuel type for your water heater. If you are considering electricity, check with your local utility company for off-peak electricity rates for water heating.

One of the greatest benefits of having your heating looked at now rather than waiting until something breaks, is that you have the luxury of time. Because you aren’t dealing with the pressure of a cold house, you can take your time to find a good plumber with reasonable prices, and can afford to wait a couple weeks for an appointment at a convenient time if need be.

Update Your Pipes: If you live in an older home and still have the original pipes, then you should think about replacing them. Newer plumbing systems are more efficient, as well as being safer and less prone to damage.

Do not use galvanized steel for your plumbing. Galvanized steel can be corrosion ridden. Copper plumbing is your best bet.

Tips for repairing burst pipes: Contact a plumber- A burst pipe cannot be repaired effectively by you because it requires the use of certain tools. After taking the initial measures of stopping the water supply and clamping a rubber seal on the leak, you should contact a plumber to come and take a look at your pipe and provide a solution for the problem. The plumber can guide you whether there is the requirement of a repair or the pipe needs to be replaced. He has the right instruments and parts to repair or replace the pipe and bring it back to the proper working condition.

To determine the size of sump pump you need, you must know how much water you’ll need to be pumped, how high the water will be pumped and the length and size of pipe.

Plan a lighting scheme. The best approach to a well-lit space is to incorporate layers of task, accent, ambient and decorative lighting.

If you have never been trained on how to use an auger, you can cause serious and expensive damage to your pipes.

Heavy duty paper towels or rags will help clean up water from small leaks.

Get a copy of the Uniform Plumbing Code to make sure your plumbing is up to par.

Learn how to tackle small problems. With a few tools and a little knowledge, most of us can handle small plumbing emergencies. With a plunger, a pipe wrench and a sewer snake in your tool kit, you’ll be able to take care of small problems like clogged drains, blocked toilets, stuck valves and dripping faucets. How-to books, home improvement stores and adult education classes can pay for themselves when it’s time to call the plumber.

If the issue isn’t #11 than check to see if you have a water-filled float ball. If this is the case than it is time to replace the ball.

Make sure the machine is balanced: It may sound hard to believe, but something as simple as your machine being tilted can cause water to leak. If you’ve recently installed or moved your machine, make sure it is completely level. Even the slightest tilt can cause water to leak from the front of the machine.