#1 Rated 24X7 Plumbing Companies Anchorage 99509 AK (844-507-4350)

Posted by in Plumbing Companies, on January 21, 2018

Plumbing Emergency Firms in Anchorage Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Anchorage 99509 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Anchorage 99509 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Anchorage 99509 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Anchorage 99509 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Anchorage Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Anchorage 99509 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Anchorage 99509 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Anchorage 99509 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Anchorage 99509 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Chitina 99566 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Chugiak 99567 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Chignik Lagoon 99565 AK (844-507-4350)

Starch products or coffee grounds: It’s not a good idea to put a lot of starch product or coffee grounds in the garbage disposal. This waste can clog your drain. In the same way, coffee grounds may attract grease that can accumulate over time. While a small quantity of these things won’t cause problems, peeling tons of potatoes into the drain can give you lots of problems.

DIY plumbing jobs will need which you learn how to solder copper to the lines to the water supply. You can practice this skill which means you have the ability to run your lines without worrying regarding this leaking. Look online for video tutorials which can help you receive a handle on the way to soldering.

Tips for repairing burst pipes: Replace the old pipes- In case the pipe that has burst is a few years old, it is better to replace it rather than repairing it. The reason is that old pipes become brittle with time due to continuous exposure to water and tend to break. It can so happen that the old pipe that you have recently got repaired, develops a new crack. This means that you have to again spend on getting this leak repaired. This increases the hassle as well as the expense. Therefore, it is better to spend on a new pipe now rather than spending multiple times in the future.

WaterSense labeled toilets meet or exceed plumbing standards

Just before the cold season hits, check out the condition of your gutters around the roof of your house. Remove all debris, leaves and branches to help you have a smooth flow of water as well as simple drainage. Caretaking beforehand will assist you to prevent serious problems with plumbing in the future.

The Wet & Dry Vacuum: If you have a wet & dry shop vacuum, it can become a terrific tool to unclog drains. First, set it to vacuum liquids. Cover up the vent to prevent a mess. Then, create the tightest seal you can over the drain. You may want to get creative and adapt an old plunger head for this purpose. With the vacuum turned on its highest setting, it can be powerful enough to draw the clog up the pipe and into the vacuum bag. It doesn’t always work, but it’s worth a shot.

Install water detection devices: A water detector is a small electronic device that sounds an alarm when its sensor comes in contact with moisture. Its main benefit is that it detects low moisture levels or slow leaks that often go unnoticed. Install it near water heaters, sump pumps, washing machines, dishwashers and toilets to prevent extensive damage and mold growth.

Tips for maintaining plumbing during winter: Install pipe insulation- To prevent the water pipes from getting frozen in the cold weather, you should provide adequate padding to the pipes from outside to keep them warm. This padding can be in the form of foam sleeves or insulating tape. If some parts of the pipe are still exposed, you should make use of heaters and lamps in the room to keep them warm. Insulation can save a lot of time and effort that is generally spent on thawing a pipe. Insulation is very important for the basement and attic pipes because these places are prone to cold temperatures.

Look at the faucets for leaks. Examine the knobs and also the faucet itself. Hundreds of gallons water every day can be wasted because of leaks and that’s not good if you’re paying your water bill. By stopping a leak now, it can save you yourself lots of money. Leaks can grow with time as well, so avoid a disaster and view all faucets for leaks!

Understand standard bathroom dimensions. Knowing a few key measurements, like the size of a typical bathtub and how much space is needed for a toilet, will help you plan your remodel more efficiently.

Use a shower curtain instead of a glass shower enclosure. “A curved rod with a really cool shower curtain is going to save you a lot of money,” Brugnoni says. Plus, a shower curtain adds color and can be changed out easily.

Tips for maintaining plumbing during winter: Change old pipes- It is better to change your water supply pipes if they are a few years old. They may have developed small cracks and are more likely to get damaged or broken in case they get frozen. You should check all the pipes before winter sets in and see which ones need replacement. A new plumbing system can work more efficiently and is less likely to get damaged easily. Instead of bearing the pipe repair or replacement expenses later, it is smarter to spend on a new system now.

Tips for Fixing Low Water Pressure in Your Home: Check individual faucets- If one of your faucets is not providing adequate flow of water, you need to check whether the problem is just with that faucet or with all the faucets. In case only one faucet turns out to be faulty, you can check what is restricting its flow. The aerator may be clogged, the stop valve may be partially closed or the washer may be dislodged. Once you identify the fault, you clean it out or remove it. You can also check the supply valves which are present below the faucets to see whether the valve is completely open or not. This can solve the problem.

In addition to getting major things like your boiler checked, there are numerous small checks you can do yourself to ensure your plumbing operates efficiently and smoothly all winter long. Useful checks and preparations include checking exposed water pipes for weak spots or potential leaks, and ensuring they are thoroughly insulated. Damaged or loose connections in your pipe work are also important to identify as these can lead to expensive and time-consuming leaks in the future.

The first thing you should do is check the main water valve where the water line enters the home. In most cases, the valve looks like a wagon wheel and it is located at the water meter going into the home. Turn the water valve a half-turn in a clockwise direction so it slightly closes off. Then, turn the valve counter clockwise all the way so that it is completely open. There should be a forceful thrust of water that pushes any deposit through the system and raises the pressure. If you think there is sediment built up in your pipes, open your sink faucet, and then turn the water on and off at the main water valve which loosen mineral deposits and push the mineral deposits through the plumbing system.

Ways in Which You Can Prevent Water Damage: Check the bathroom flooring- Washrooms contain the maximum water supply pipes in the house. These pipes are more prone to damage because of regular use. If they start leaking, they can make the floor damp. Soft spots created by this dampness are generally seen around toilets, sinks, tubs and showers. You should immediately call the plumber to fix the leak to prevent the dampness from spreading to other parts of the bathroom or the house.

Planning ahead is important when it comes to such an important aspect of your home such as plumbing and heating. Problems which do occur can be devastatingly expensive and inconvenient, so putting the work in now can save you a great deal of hassle and money.

You can also add some hot or boiling water to your bowl and try flushing, to correct a clog.

Find out when it leaks: If the leak starts during the spin cycle on your machine, it could be a leaky drain hose. Locate the drain hose and make sure the connections are all tight. You may have to purchase a new drain hose if the existing one is damaged. This is an easy DIY fix.