#1 Rated 24X7 Plumbing Companies Anchorage 99508 AK (844-456-4168)

Posted by in Plumbing Companies, on October 15, 2017

Plumbing Emergency Firms in Anchorage Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Anchorage 99508 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Anchorage 99508 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Anchorage 99508 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Anchorage 99508 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Anchorage Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Anchorage 99508 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Anchorage 99508 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Anchorage 99508 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Anchorage 99508 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Seldovia 99663 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Sand Point 99661 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Scammon Bay 99662 AK (844-456-4168)

Ways to Unclog Drains: Buy a snake pipe to pull out the obstacle- This is a cleaning equipment which is very effective. It has to be used manually to bring out the things which are obstructing the drainage system. The snake pipe has a flexible metal spiral string at one end which can be pulled out and extended to slide into the pipe like a snake and after reaching the point of the clog; it can dislodge it and pull it out. The snake pipe should be used after opening the drain pipe from below. This can effectively remove the obstacle in a short time.

Waiting for a response from professionals during gas leak: In case you don’t receive a timely response or due to unavailability of emergency repair service by the service providers, do not wait or jump in yourself. The next best move is to call the local fire department because these days, every fireman is trained to handle gas leaks professionally.

When installing a sump pump, it is usually recommended that a check valve be installed, this prevents water left in the outlet pipe from flowing back into the basin

Save Money on Bathroom Modelling – Tap your contractor’s sources. When it comes to things like flooring, ask your subcontractor if he has odds–and–ends stock left over from other jobs. While renovating a Civil War–era bed-and-breakfast in New Jersey some years back, contractor Bill Asdal needed wood flooring. He made a few phone calls and came up with hundreds of square feet of hardwood, in various lengths and widths, that otherwise would have gone into the trash on other job sites. Just by planing it to uniform thickness, then sanding and refinishing it, he saved his client almost $9,000 in materials costs.

Prevention and Maintenance: Take note of possible build up of grease, hair or any material that can clog your drain. Remember that grease solidifies when it cools which could certainly occur inside your plumbing. The best that you can do is gather excess grease in a different container then dispose it when it solidifies. Though simple as they may seem, preventive measures can save you from further expenses and worries. Another option is to apply for a maintenance contract with a reputable plumbing company. If your plumbing system is regularly checked, you will surely be at peace of not having any major plumbing troubles in the future. A small amount of money spent now can save you a huge deal of money later on.

Tips for repairing burst pipes: Prevent the problem from occurring again- Once you have gone through the time consuming process of repairing a burst pipe, you need to make sure that the problem does not occur again in the future. Pipes can be saved from leaks and bursts by insulating them in winter and by checking them regularly. If you detect a small crack, you should immediately take action to prevent it from leaking. In case you are leaving for a vacation, you should turn off the main water supply. These small steps can save you from a lot of hassle and expense in the future.

A leaky toilet can increase your water usages by more than 40%, you’ll want to repair the leak ASAP to save money on your water bill

What to look for in your next contractor – Do they guarantee their work? It is an industry standard to verify labor and parts. Be wary of any plumber that does not offer any type of guarantee.

Disposable diapers, feminine hygiene products, hair, coffee grounds, toothpaste, food particles, oil from cooking and mineral build up are the most common causes of clogged drains

A water heater setting of 115°F provides enough hot water for most users

Desperate Situation & Water Won’t Empty: Chances are if you do a treatment with baking soda and vinegar, have the stopper removed, and leave the backed up mess overnight, you’ll find the liquid should have emptied by the morning. The vinegar and baking soda should have worked some of the buildup free on its way down. Do a hot water flush first thing and if the liquid empties as quickly as it normally would, you should be ok–do a couple hot water dumps though just to make sure. However, if the liquid empties slowly, you might want to check the trap to make sure there’s no mass blocking it. If there isn’t, try a couple more treatments of the Flush throughout the day. You just might get away with not having to call in the plumber.

Ways in Which You Can Prevent Water Damage: Make sure your yard is sloped- The slope of the land surrounding your house needs to span at least 6 to 10 inches in order to facilitate the flow of water away from the foundation of the house. If the slope is not adequate, then the water gathers near the foundation and causes damage to the walls. It makes them weak by creating leaks and cracking the masonry. The dampness can provide the right conditions for mold and rot to spread which can eat away at the base of your house. To prevent such damage, you should slope your yard properly.

Choose chrome rather than brushed nickel fixtures. It’s cheaper, and there are more choices. And chrome is even making a comeback, Brugnoni notes.

Plastic piping is much easier to install, adjust and tighten if a leak develops, than metal piping

If the issue isn’t #11 than check to see if you have a water-filled float ball. If this is the case than it is time to replace the ball.

Plunging: Use a small plunger to try forcing things to clear. You’ll need a few inches of liquid in the sink to help make a vacuum seal for the plunger and a few forceful plunges to make this work. You can buy a plunger that’s about a 1/3 of the size of a regular toilet plunger. These are only a couple bucks, need very little room and they’re great to keep just in case trouble rears. You can use a full sized one if you can’t find a small one.